20 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
5
Engineer built for personal use.Single axle, torsion suspension,NO RAMPS, hand winch,DRIVE ON/DRIVE OFF or winch.1640(5'4") wide 3300 (10"10"")long (rails).Width is adjustable IN.Ratchet straps at front.ELECTRIC BRAKES/Hand brake .14x6 Sunraysia wheels/185-LT tyres(90%).One person operation,Will not disappoint.NSW Reg X22090 expires April25.
13 1
Roll CageLog Book
Toyota Supra drag car, full chassis complete ready to race. 410 cube SBC running methanol ,all engine specs can be supplied , new Ray Edwards carburetor, hughes powerglide with convertor to suit, 9 inch 35 spline floating axle with 1/4 & 1/8th mile gear sets, new front runners and slicks, car runs straight and consistent with engine and trans assembly only doing 12 passes, Andra tech and paper work available
10 1
Tri-Axle Aluminium Flatbed trailer with wire winch. 5.17m long bed and 2,640kg payload capacity, perfect for transporting heavy automotive, machinery and heavy or long pallets with unusual shapes as well as bulk loads. Galvanised steel chassis for durability and longevity. 5.2m long deck, 2,640kg load, 2.1m wide, 55-59cm high, 14° angle. 11.3 sq.m load area – perfect for transporting oversized loads and pallets, unusual shapes as well as automotives. Galvanised steel chassis tandem axle for d
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
2
Brand new Futura Trailer Pro Sport 6m x 2m. Available from May 2024. Remote Control operated lowering trailer. - Comes with Spare Wheel, Recover Winch, Stone Guard, Tie Downs NOTE: Tire Rack not included. - 12 Months Rego - 2 Year Warranty - Load Capacity 1850kg - Tare weight 650kg - ATM / GVM 2500KG
10
Roll CageLog Book
VL Calais - Drag Car Roller Set up for SBC and glide Comes with, engine plates, pipes & tail shaft to suit. Full Chassis 4 Link Drag Car. Setup by John Willard @ Flatout Services. Funny Car Roll Cage. ANDRA & IHRA Tech Front Race Struts. Mark Williams Diff Center with new 4.56 gears 35 Spline MW Axels. Koni Drag Race Double Adjustable Rear Shocks. Adj Wheelie Bars Custom Alloy Fuel Cell Wiring, Shifter with Dedenbear shift solenoid, Gauges, MSD 6AL, Chute, Harness, Window Net etc. Wil
7
RegisteredLog Book
1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi
9
Ford 27 Track T Roadster, all Henry Steel, well built hotrod. Running Y block Ford V8 with 4 carbs set up, Auto, coil rear, aluminium radiator. comes with guards, Rego inspection list completed, Full registration in NSW available, comes on 4 new tyres on new smoothies with moon discs, as per the last photo.
9
Roll CageLog Book
FOR SALE (complete Roller) CHEVY LUV STREET/DRAG CAR $28k or $22,500 less wheels Car currently runs 8.41 @159 Set up for bbc and glide (will come with pipes / tail shaft to suit) Would suit other combos comfortably Painted in House of Kolor Current IHRA tech 9” 35 Spline / ladder bar Disc brake front rear Coil overs front and rear Wheelie bars / Parachute / Wing etc Everything will be there less the engine and gear box Beadlock rears / 17” RC fronts car All windows are glass (front wind
14
VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun
9
Registered
This 2007 Jeep Grand Cherokee with a powerful built 426 supercharged engine * Engine Built 426 by Pryce engines with supercharger * Paramount performance transmission and custom cams tunes by Motorsport Mechanical (Mike Mansour) * More power than a Jeep Trackhawk * 22 inch Simmons rims *98,256km * Grey Leather interior * Rego Feb 2024 *Alpine stereo * Sun roof * TV in rear headrest *Tinted Windows
6
Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!
5
Roll Cage
Ford 1 Tonner drag Ute Full rollcage B&M Shifter Autometer Gauges Autometer Shift Light race seat & 5-point harness Hoosier Rear Slicks Upgraded Rear end. Upgraded Tail Shaft Comes with many additional spares. Contact Karen for more details
9
200" Hal Canode built Front Engined Dragster, 468" Blown BBC, Alloy heads, Methanol carbs, B&M ProCharger, 2 psd P/Glide, 24" Cage, has run quickest @7.58sec. Consistent 7.60 car. Won SID 2009 Modified Track Championship. Includes 24ft Tandem axle enclosed trailer, Electric brakes & trailer tilt, Bench & boxes, spares, compressor, fuel rack & jugs, suit rack, front wheel rack, tiedowns, lighting, race jack and stands, 6m foldaway canopy etc... Too much to mention. Give me a call for more info. W
4
Roll CageLog Book
1927 Ford Roaster Drag Racing Car Engine: 383 Small Block Chev Gearbox: Powerglide Rear end: Strange housing and center with pro gears Chassis: Complete CM4130 chassis For photos go to www.cacklingpipes.zenfolio.com and search number 2360 or feel free to contact me with any questions.
6
$35,000 as a roller OR $50,000 as a complete car 1/2 CHASSI CAR series 6 bridge port turbo Air shifted liberty Floating 9" 4 link rear Koni's plenty Shocks and sway bar Runs easy low 8's plenty more in combo MW Ignition Data Logger new parachute new front tyres new rear slicks new harness Andra and IHRA TECH INSPECTED
3
20B PAC race engine Billet centre plate Billet 2 piece crank Tail 60mm wastegate Blackbox computer Big Garrett turbo Front mount cooler Dry sump setup Methanol Extra injectors Gforce5r manaul gearbox 9inch full spool diff mark Williams 35spline axles Willwood brakes Deist parachute Fire system Funny car cage Alumastar wheels To many things to list Car has gone a best of 7.6 @ 187mph No time wasters or low ballers please
9
Professionally built and suitable for range of work and leisure uses.Tub interior is not fitted out but does baselines,lights,power and tie down points..Fibreglass lid was manufactured in Canada, alloy rack suits boats,kayaks and is constructed to hoist lid vertically if being removed. Full width alloy multipurpose tool box, Jerry cans,camping gear at front.95 litre water tank with electric pump and tap on drawer bar.9 kg gas bottle with bayonet fitting near tap. Wheels are 6 stud 16x7 alloys,t
6
Open to reasonable offers 1960 morris minor panel van - Full custom setup including chassis, cage, steering, suspension. Set up for Drag racing - Brand new 2 speed powerglide - Brand new Hypertune intake and exhaust manifold - New rims and tyres - Brand new Stealth B&M Shifter Way too much to list Engine is a SR20 which has been Darton Sleeved, All machine work carried out, new rods and pistons, Car runs Mechanical fuel pump and dry sump in which is all new. This car has been professionall
7
1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers