SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

187 suspension OR brake OR tyre OR wheel for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

62
Registered
The Knight in V10 Armour After a decade of teetering on the brink of disappearing into the abyss with so many other iconic marques, Lamborghini under the ownership of VW knew they needed to pull something very special out of the hat. Enter the Gallardo. Named for the 18th century Spanish bullfighting breeder Francisco Gallardo (meaning Gallant), the Gallardo was unveiled at the 2003 Geneva motor show and from the second the covers were whipped off, it was a runaway success and put Lamborghini b

Mona Vale NSW, Australia
Share
Watch
16
Roll Cage
Log Book
New Build. Tested and set up over the last year at open practice. The car was entered into the Sydney 300 for its 1st Race, Achieving pole position and the race win in division E. -National / Rally FIA role cage -PB 4 piston aluminum calipers -DBA 5000 two-piece rotors 320x28 -AP Racing CP3215D50 pads 90% left -Custom cacuum chamber, can adjust pedal feel - Wilwood rear brake Bias -PB damper adjustable coilovers -Quaife ATB helical LSD -Custom exedy button clutch -Enduro developed engine. -Fo

Glenwood NSW, Australia
Share
Watch
47
Registered
With a 1990s movie portfolio that would put Tom Hanks to shame, the Lamborghini Diablo became the ‘it’ car of the decade. Wherever it went it was admired and whoever was seen in it, well, they had made it. But there was one version of the Diablo that was a little more daring than the others, the rear-wheel-drive 5.7, V12 Diablo. First contemplated in 1985 as a successor to the Countach (another vehicle with a strong film presence) Project 132 had a one-line brief – the car must have a top speed

Mona Vale NSW, Australia
Share
Watch
4 1
Fully prepped vintage rally car on full NSW rego (car has its original plates from 1967!). Perfect for charity rallying or competitive vintage rallying. Over $60K spent up until now, most recently a full end to end service and dyno tune with complete digital ignition set-up ($3800 all up). Engine is a fully built Vintage Performance Developments B20 2.3L Stroker running stage II heads with twin SU Carbs and ceramic coated extractors. Car now produces 132hp at rear-wheels with conservative 6000rp

Manly NSW, Australia
Share
Watch
15
Roll Cage
Log Book
EVO7RS - Les Walkden built factory RS, Car No. L12. Ex Ed Ordynski car, CAMS Log booked, Chromoly welded cage, Freshly rebuilt Evo 9 Mivec motor to Targa spec, 250awkw, near new Owen Developments turbo, Motec ECU with anti lag, New MCA Gold suspension, freshly rebuilt RS gearbox, Coralba rally computer, heated front screen, quick release RaceTech wheel, near new oil cooler and radiator, Evo 9 front bumper and rear diffuser, new belts, new fire extinguisher plus fire bomb, 2 sets of OZ light weig

Collaroy NSW, Australia
Share
Watch
58
Registered
The New Benchmark‍ McLaren is a name synonymous with motor racing success all across the globe, particularly with Formula 1. Building an incredible reputation that stretches all the way back to Bruce McLarens first success is Formula 1 at just 22 years old (a record at the time). He then went on to construct his own cars that competed with unrivalled success in the Can-Am championship where it dominated with nearly three times the victories of Porsche. Fast forward many decades and countless w

Mona Vale NSW, Australia
Share
Watch
13
Our Latest Generation Load Cell Simulator Kit for PE Racing Billet Pedal Assembly Designed & developed to feel realistic, and handle real life pedal forces. PE Racing Load Cell Sim Racing Kit is designed for professional Motorsport Simulators & gaming. Designed to suit the Patented PE Racing Billet Pedal Box. Driving Simulators typically see more laps than real race cars, and thus these sim cylinders must withstand the same forces with increased cyclic loads. We have designed & developed thes

Oakdale NSW, Australia
Share
Watch
12
Roll Cage
Log Book
IPRA 3J VS Holden Commodore. Ex Dan Russo Commodore Cup car with chrome moly roll cage, Comes with Fresh ex Gene Cook 253 engine with com cup sump, super T10 Dog box 4 speed,Romac full floater rear end, Big bearing front hubs, Bilsteins suspension with brand new Rota 18" x 9"rims and com cup brake package along with aims dash & coms radio wiring. New air Jack system fitted to car. WP: 1:06 SMSP 1:44 Car comes with extensive spares package which includes most parts to install a LS into the car.

Cessnock NSW, Australia
Share
Watch
11
Pedal Sliders Designed & Manufactured in Australia by PE Racing These are specifically designed to suit our PE Racing Pedal Assemblies and cater for the FIA fixed seat regulations. A little about our Pedal Assembly. This PE Racing Patented Frame design came about as a result of common problems experienced while installing pedal assemblies to a range of race cars over many years. Initially a typical floor mount frame usually has a relatively short flat footprint, the brake pedal forces ultima

Oakdale NSW, Australia
Share
Watch
72
$360,000 EGC
Registered
The best sports saloon....ever Commencing production in 2021 and listing a raft of improvements over the already astonishingly capable M5 Competition, the M5 CS fast became THE ultimate M-Car and global production sold out instantly. Every single one of the only 20 allocated to Australia was snapped up as soon as BMW confirmed availability in our market. Fortunately the car lived up to the hype with the CS being even that much better than the Competition on which it was further honed and revise

Mona Vale NSW, Australia
Share
Watch
95
Registered
“We stopped counting at 4,000 hours.” As far as modified Mustangs go, this would have to be one of the absolute best in the country, if not on an international level. A labour of love built by the team at Stevens and Brennan Automotive, the plate in the engine bay says it all: heart, body and soul. This really is a very special car. Fully engineered and NSW-registered, the 1968 model Ford Mustang runs a supercharged 5.0L Windsor engine with GT40 heads (the engine is the same specification as

Canterbury NSW, Australia
Share
Watch
8
2004 Subaru Forester This was our shops hill climb/super sprint project but due to our current racing we are short on time to finish. Car is running, driving and operates fully. Interior stripped, racing seat and harnesses fitted, harness bar Fuel surge system installed BC Racing coil over kit installed 4/2 pot brake WRX calliper kit with associated bracketry to install supplied, modifications have been carried out to fit the kit, just needs instillation. 17 inch WRX light weight wheels wit

Cooks Hill NSW, Australia
Share
Watch
59 1
Registered
The Bat for The Batman Some Lamborghinis are famously named after famous Spanish Fighting Bulls, and this car was certainly named for one of the greats. Named “Murcielago” (Spanish for “Bat”), the first clean sheet design in over 11 years was worthy of being named after the legendary bull that survived a brutal fight in 1879 with such passion and spirit to captivate the audience and be given the honour of retiring and being a leading sire A huge leap-forward in design, ergonomics and performa

Mona Vale NSW, Australia
Share
Watch
10
PE-Clamps are a quick & easy solution to mounting panels, cables, plumbing or accessories securely to common tube and roll cage sizes; eliminating the need for welding. PE clamps come in four different styles and a variety of sizes to satisfy a wide range of tube mounting needs. The images show a small example of potential uses. We have Engineered these to withstand a 10G dynamic load of 5 kg (equivalent to a static load of 50 kg) per clamp. The clamps have an optional vibration insulator th

Oakdale NSW, Australia
Share
Watch
10
Designed for the Driver, NOT LIKE ANY OTHER FLOOR MOUNT PEDALS. This Patented Frame Design includes; Adjustable Mounting Feet, Fits easy to a variety of floor shapes. Adjustable Pedals Faces and, Adjustable Throttle geometry. High Quality, Reliable, Light, Strong & Fully Adjustable. This advert is for 2 Pedal Billet Frame Kit only for $1224 Aud (excl GST). 3 Pedal Billet Frame Kit is also available for $1673 Aud (excl GST). The Billet 2 & 3 Pedal Frame Assemblies come with, Levers, Ped

Oakdale NSW, Australia
Share
Watch
10
PE Racing offers you lightweight, reliable & high-performance Racing Pedal assemblies with Patented adjustable features to suit your driving style & increase performance. Designed for the Driver, NOT LIKE ANY OTHER FLOOR MOUNT PEDALS. This PE Racing Patented design came about as a result of common problems experienced while installing pedal assemblies to a range of racecars over many years. Initially a typical floor mount frame usually has a relatively short flat footprint, the brake pedal forc

Oakdale NSW, Australia
Share
Watch
51
Registered
At CHROME TEMPLE we feel the the ingredients for collecting success need not be many. Complementing fire breathing high capacity engines and analogue driving characteristics should be strong provenance and true scarcity. With just 100 units produced globally (rarely will you find such a low production number across any marque) to celebrate 50 years of Lamborghini and the most successful model to date, this last of the line Gallardo was the culmination of the very best aspects of the Gallardo.

Mona Vale NSW, Australia
Share
Watch
54
Registered
An Exercise in Excess Just occasionally a car gets made to celebrate what can be done when a bunch of engineers get together and tear up the rule book. With the impending move towards electrification and hybridisation, the boffins at Aston Martin huddled together and talked in hushed tones about the idea of taking the mega twin-turbo 5.2 litre V12 from the DBS Superleggera and shoehorning it into the smallest car they make, the Vantage. What we ended up with after countless hours and millions

Mona Vale NSW, Australia
Share
Watch
5
Electric Club Car brand Golf Buggy with body kit and mag wheels. Comes complete with genuine Club Car Battery Charger. Immaculately maintained and kept. Only selling due to no longer required. Was originally purchased for my customers with GT cars to tow tyre trolleys and equipment to pit lane etc. Fits in an 8' x 5' box trailer for easy transportation. Note; Price +GST

Blaxland NSW, Australia
Share
Watch
7
Roll Cage
Log Book
MNR Vortex 2009 Professionaly Built & maitained by Redback Motorsport, car is prepped & ready to go racing, supersprinting or to just have a lot of fun at a track day. Capable of .62 in the right hands at Wakefield, has clocked .65 at Wakefield Yamaha R1 engine with a 6 speed sequential gear box Protech Shocks, Muffet LSD, Extra set of rims with R specs fitted, fully adjustable suspension Cams log booked for more details please contatc me $24999 ONO

Goulburn NSW, Australia
Share
Watch