SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds
SOLD!

This one got away, but check related items for something similar.

SOLD!

This one got away, but check related items for something similar.

14
Sold4295 viewsupdated a year agocreated 3 years ago
Share
Watch

1988 mazda rx7

$36,000
Mazda
Make
RX7
Model
1988
Year
Weston NSW, Australia
Location
L98
VIN / Engine Number

1988 FC RX7, CAMS logbooked (class 3D) and raced in NSW superTT and local hillclimbs.
Ive owned the car for the passed 12 years. starting out as a street car, i have slowly turned it into a very competitive race car.
It is well balenced and has gone (1.03 at WAKEFEILD PARK) (1.38 at SMSP) (2.33 at BATHURST)

Car failed an engine and has been removed. comes with an inspected/machined block and heads. will require new crank, pistons, rods, cam and oil pump. ALL other engine/car parts are in labelled bags/boxes and are in great serviceble condition.
I had planned to stroke it to 408ci and use CP pistons and rods with a cam to suit.. this is all that is needed to reassemble the car and go racing.

ENGINE SPECS
*L98 from VE ss, was running VCM884 cam making 400RWHP
comes with,
*solid trunion rockers
*morel tie bar lifters
*dual valve springs and retainers
*double row timing chain
*high vol oil pump
*custom sump

*inspected/tested L98 block 0.05" over bore with new cam bearings ready to assemble.
*inspected/cleaned L98 heads

parts required for engine completion.
crank, pistons, rods, valves. bearings and gaskets

CAR SPECS
*tein adjustable coilovers, set up by suspension concepts 1280KG wet with driver in. corner weighted 50/50
*toyota supra full floating FORZA front brake rotors with modified rx7 calipers up front, FD rx7 rear brake conversion. front and rear bias.
*WINMAX W5 rear pads WINMAX W6.5 front pads with spares. it stops great!
*whiteline adjustable sway bars front and rear
*custom rear adjustable lateral rods and camber rods.
*solid mounted diff with pinion snubber
*new front and rear wheel bearings
*rebuilt VE SS L98 tremec T56 6 speed gearbox and custom tailshaft and Extreme clutch and lightened fly wheel
*full CAMS Compliant tower to tower rollcage built by wildridge fabrications
*completely stripped interior, no sound dedening
*reshimmed T2 LSD diff with spare diff and spare axles
*full motorsport spec wiring with killswitch
*custom fuel cell, gated and foam filled with 2x walbro 460 pumps and -8 braded lines throughout
*custom in car clutch master cylender with remote resovour to clear engine.
*sparco fixed race seat, 4 point harness, window net,
*adjustable carbon custom rear wing
*quick release front bar with canards
*big oil cooler with -10 lines
*3 row alloy radiator and full ducting
*front brake ducting
*drivers side under floor heat sheilding
*custom drivers side lowered floor pan to lower seat mounting and allow seat adjustment
*2 sets of wheels.
-WORK 18x9 front 240 640 18 , 18x10 rear 280 640 18 kumho slicks
-RAYS 17x9 x4 255 40 17 Yokohama A050
*all tyres are only 6 months old with just 2 race meets use on them.
*custom 1.75" tune length extractors into 2.5" twin exhaust.
*custom solid engine and gearbox mounts utilizing factory mounts.

Crossmember and tunnel were not modified to fit the V8. car can be turned back to ROTARY if desired with absoluteley no complications. all original mounting points have NOT been damaged or removed.
I ran this car with a 13B brigeport TURBO with 380RWHP and went 1.42 at SMSP. before the engine change.
There is plenty ive most likely forgotten feel free to call and ask.

Exterior body and paint is in exceptional condition. painted in a custom blue, i have 200ML of colour left for paint matching.
Interior paint is 12 months old and in exceptional condition. painted toyota white.

This is a super easy car to drive and loads of fun, ballenced great both in the wet and dry. and would be great at club days or go racing in supertt, sports sedans and probably lots of other categories. log book for all events its entered for history.