44 Car, Bike or Kart for sale

Holden Astra SRI Turbo, set up for track days, Slotted front rotors, Ceramic front & rear disc pads, Sparco race seat (not fitted), Momo steering wheel, Racegear harness, Spare brake pads and wheels & tyres. With a couple of week ends work and very little cost you can be racing in Track days, Tampered race days, Regularity races, 6 Hour relays, Budget enduros etc. (Trailer not included)

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

This very special original Chassis no GSM 009 Kmart VT Commodore car built by Gibson Motorsport. This was the last built Gibson commodore v8 supercar formerly raced by four time Bathurst 1000 winner Greg Murphy. Debuted by the Kmart branded Gibson Motor sport team at Calder in 2000 shell championship, This car was initially driven by Greg Murphy. It became the Murphy / Steven Richards car for the Queensland and Bathurst endurance races. Scoring podium finishes on both occasions finishing 3rd. Th

*ARRIVE & DRIVE AVAILABLE - REMAINING 2024 & 2025 SEASONS* We have an arrive and drive package available for the remainder of the 2024 V8 SuperUte Season and we are also taking inquiries for the 2025 V8 SuperUte Season. This package includes full trackside support from Apogee Motorsport, based in Lonsdale, South Australia. The package includes everything that you need to go racing with the exception of damage and the driver's flights and accommodation. Remaining Events 2024: Oct 10th to 14

2012 Audi R8 - V10 - 66,000kms - Gated Manual - Rohana 20'' wheels - German rush carbon fibre front splitter, side skirts and rear diffuser - Car is currently wrapped in celestial unicorn 1 of 8 rolls delivered to Australia and 36 worldwide. Car is gloss black underneath. Wrap can be removed in needed. - CFI twin turbo kit from USA. The owner was flown to Australia to personally install. Has precision 5853 twin turbo's, air to water cooler, all top of the range and custom components used. Full

Think GT3 racing and it is impossible not to think of the Audi R8 LMS GT3. One of the most successful GT3 race cars of the modern era, it has amassed 83 drivers’ titles internationally and 106 championship victories – as well as eight overall victories in 12-hour races (including a record three at the Bathurst 12-Hour) and 13, 24-hour victories. It more than meets the challenges posed on all racetracks in all climatic zones and has won titles in Saudi Arabia as well as in Europe, Asia, Australi

- project roller - fabricated 9 inch rear end -4 link anti roll bar -chrome moly funny car style cage -Viking coil overs all round - weld single bead lock 15x12 - mt 29.5-10 rears new - weld alumastar front runners - alloy fuel cell & triple pump set up -fibre glass bonnet and street bonnet -Vx Calais body kit Contact Rob 0417 881 260 Can assist with transport to Melbourne and Sydney

Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.

Perkins Engineering VT036 silver bullet 2000 Russell Ingall car Refurbished in 2016 Run at festival of Motorsports Adelaide 2017, log books x3 from 2000 up to date has not been used since 2017

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.

1984 DR30 Skyline RS-X FJ20 Turbo Intercooled As seen in the photos this car presents incredibly well for its age. Mechanically everything is as good as can be. All suspension bushes have been replaced throughout the car except for the rear subframe as they weren’t available. New front lower ball joints fitted. New KYB front and rear shocks. New front slotted disc rotors. All electric windows work. Factory central locking. Original Japanese radio with cassette player. Some seat panels have been

Professionally New Built Can be registered Willwoods Brakes All Round Build for 1,500 HP Call 0413 878 516 $40,000

1997 R33 GTR 16x,000 kms R35 coilpacks with Raceworks billet bracket HKS Coilovers Twin plate clutch Wedsport TC105 New S3 Front lip Oil filter re-location Ganador side mirrors Momo Monte Carlo wheel (will come with stock steering wheel) Based in Melbourne but happy to assist with transport

400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar

2003 Holden Monaro CV8 series2 Circuit Racing No expense spared Professionally prepared, turn key & Ready Experience the excitement of the track with this exceptional car and enjoy track life LS 6LTR Engine (25hrs only) Curl Over-race springs, adjustable suspension. Bembro brakes, 6 piston front& 4 piston rear. Motec PDM Motec digital Dash 2 Battery isolation switches Cobra seat RPM Harness Roll Cage Diffs true track 3-5 Ratio Race tyres.