245 Parts, Accessories or Other for sale
Featured
AIM XML Dash with GPS for $1400 with wiring loom
Racetech completion Kevlar race seat. These cost $12,000 new. It’s in excellent condition. Still current and certified to 2025. Easy to get recertification. Model RT 9129 WTHRL
Full Set of Multimatic DSSV dampers, used to suit AMG-GT3 2016 to current. Complete with top and bottom spring perches and elastomer bump rubber set as shown. 1 x rear has had the damper tube replaced due to the seal nut thread being stripped. Sold as a set and will not separate. Also comes with 2 x rear spring sets with helper springs and separate spring perch rings 200N & 250N. Valving - Front - Bump (P_IDO) Rebound (P_S14); Rear - Bump (P_IDL) Rebound (P_S14) Pick up or freight at buyers expe
Set of 4 Performance wheels, 13 by 7 inch, 95mm back space. Wheels are deep dish that are now hard to come by. The wheels have some minor scuffing on the front that could be easily polished out. Three of the wheels have Toyo Proxess R888 tyres mounted 205/60/13. Tyres are in excellent condition and have done very little work. Unfortunately the fourth tyre in the set was damaged. Set of 4 wheels and 3 tyres $800.
All Results
New / Unused Krontec RFC-89-K Refuelling Head Suit multiple vehicle applications across GT3 ( Aston Martin , McLaren, Porsche ) / V8 Supercars using this quick refuelling system. Supplied new in original delivery packaging. Item surplus to requirement. 1 only, available for immediate delivery IMSA / FIA / SRO Approved
Set of 4 Performance wheels, 13 by 7 inch, 95mm back space. Wheels are deep dish that are now hard to come by. The wheels have some minor scuffing on the front that could be easily polished out. Three of the wheels have Toyo Proxess R888 tyres mounted 205/60/13. Tyres are in excellent condition and have done very little work. Unfortunately the fourth tyre in the set was damaged. Set of 4 wheels and 3 tyres $800.
Used Semi slick tyres to suit 13 by 7 inch rims. Tyres were used 3-4 times per year for the sprints at Morgan Park. Tyres are undamaged Yokohama Advan 048 tyres 205/60/13 - Used for 2017, 2018 and 2019 sprints and then stored since-$250 for the set Nankang R1 tyres 205/60/13-Used for 2019, 2020 and 2021 sprints $250 for the set
Complete 7 point alloy roll cage to suit a MK2 Escort. In excellent condition, just needs a polish and its ready to install. Rare to see a 7 point cage.
Rare opportunity to build what is probably the last remaining kit. The Murtaya was produced between 2006 and 2010 in the UK, total production run was approximately 40 cars, 2 of which were shipped to Australia. Both kits sat in storage for 10 years before I purchased them both and completed the first car earlier this year. The kit is a single donor based on the first generation Subaru WRX GC8 and uses the same layout with engine up front, AWD system used with shortened propshaft. The Murtaya is
Brand New Unused still in original packaging IV-IX Sequential Gearbox Strong from Shift Gearboxes only delivered 2 weeks ago. For all information see: https://www.xshiftgearboxes.com/race-gearboxes/mitsubishi/mitsubishi-sequential-gearbox-evo-4-9-x-5-speed-strong
VE SUPERCAR PANELS BRAND NEW R/H & L/H FRONT GUARDS (NEED TRIMMING STRAIGHT OUT OF MOULD) BRAND NEW MATERIAL KEVLAR GENIUNE ITEMS 1.38Kg Each $1500 PAIR VE REAR BUMPER BAR (3 PIECE) BRAND NEW MATERIAL KEVLAR GENIUNE ITEMS Centre 0.74Kg Each Ends 0.66Kg Each Sides 0.66Kg Each REAR BAR TOTAL WEIGHT = 2.06Kg WILL ALSO SUIT STREET CAR $1500 (3 PIECES) PICKUP GEEBUNG QLD 4034 MONDAY - FRIDAY OR SHIP AT BUYERS COST.
Racetech completion Kevlar race seat. These cost $12,000 new. It’s in excellent condition. Still current and certified to 2025. Easy to get recertification. Model RT 9129 WTHRL
Olins shocks that came out of an evo 9 and evo 10. Can be modified for other cars. Complete with springs.
Helmet Medium size. Has posts for Hanns device. Bought new at race track 9th September 2023 and worn that weekend with balaclava. As new with no marks. Comes with helmet bag and box. paid $800 sell for $500. 0422540634 Tim
DRCE block Winberg crank morosso dry sump set up with Stef's catch can etc olds 22538816 heads Dual 1150 carbs CFE intake manifold. Jesel shaft mount rockers Jesel front belt drive set up Crank trigger etc Vacuum pump Killer engine bought years ago but never used and going different direction with car. 1350-1400 hp naturally aspirated
A set of 16” SIMMONS V5 Centrelock wheels & adaptors too suit PORSCHE 911 GOOD condition Come with new unused Michelins - though old Dated 1983 Ex PORSCHE CUP
Bullet Billet K24 Engine, recently refreshed by Bullet Race Engineering *K24 Billet Block, CNC Port Head, VCT Delete, BME Pistons, Polished Crank, Carrillo Rods, Super Tech Valve Train, Stage 3 Cams, Skunk 2 Pro Cam gears, Ferrea Roller Rockers, Ferrea Valves 1mm over size, Copper Head Gasket with Fire Ring. K Power Inlet RWD Inlet included with burst panel, Alternator setup included, Sump only fitted to seal engine, Setup to run a dry sump but can have the normal std oil pump setup fitted. Th
For sale is a 911E 2.0L engine running MFI. It’s built with E pistons & cams, less than 5000kms since rebuild. Currently in car so can be tested including leak down if required. Engine will be sold complete sans air cleaner. Located in Melbourne but happy to help with freight with any interstate buyers.
Virtually new Cobra Monaco race seat. Only used a couple of times for passenger rides. Comes with a Revolution Racegear 4 point harness and seat mounts. Located in Brisbane. Shipping at own expense or I could drop off in Sydney or Melbourne mid October
Recently sold my BMW M3 track car and have some used S54 engine parts; 6 X CP pistons, 6 x forged con rods, 24 valves & competition springs, 2 x OEM camshafts, timing chains and guides. All for standard 87.5mm bore engine. All working perfectly before full engine rebuild. Kept as spares. Also 8 x new Harmonic Balancer bolts and 1 x new Cometic 0.030 head gasket. Located Brisbane. Postage at own expense, or could bring to Sydney or Melbourne in mid October.
AIM XML Dash with GPS for $1400 with wiring loom
Perkins Holden Slide manifold rebuilt by Ian Tate. Included in the sale price is the Manifold from the P18 Perkins built for Greg Crick ARMORALL VR Commodore, Trumpets, Fuel injector rails and cold air box. (Will separate). All parts were removed from a new build engine as we changed direction for the build and one set YellaTerra E85 Holden V8 EFI 6.0L Alloy Dash9 Cylinder Heads $1800.
Full Set of Multimatic DSSV dampers, used to suit AMG-GT3 2016 to current. Complete with top and bottom spring perches and elastomer bump rubber set as shown. 1 x rear has had the damper tube replaced due to the seal nut thread being stripped. Sold as a set and will not separate. Also comes with 2 x rear spring sets with helper springs and separate spring perch rings 200N & 250N. Valving - Front - Bump (P_IDO) Rebound (P_S14); Rear - Bump (P_IDL) Rebound (P_S14) Pick up or freight at buyers expe
Unit us as new 4.33 Ratio - PVC case included - Note: this is the updated platinum version with increased strength internally around the gears …
Auctions In Progress
Must be sold! The current owner is hanging-up his racing suit and wants his 1970 Lotus Europa S2 to go to the next custodian to have as much fun on the racetrack in it as he did. Purchased in 2004 with 76,000 miles on the clock, the owner then set about turning what was already a very capable car into something even more special. Initially a Mazda 12A peripheral port was installed in the car which translated to lap times of 1:03 secs at Barbagallo Raceway in Perth. Seeking more horsepower, the