185 items with Roll Cage for sale

Classic Mazda Rotary Rally Car. Spent nearly all of its life in a shed, has never needed rust repairs. Strong Mazda 12a 6port rotary motor, 4 speed, RX4 Manual Gearbox. Starts, Runs and drives as it should. Pops flames, bangs and crackles on trailing throttle. New Mazda LSD with 4.4 gears in a RX3 diff housing. Engineers Certificate, and Cams Logbook. Was on full Vic Reg, now on Club Plates. Never been a rust bucket but has been on a few Rallies. Check out the Photos as from part of the descrip

FORD ESCORT MK2 GROUP 4: MOTOR: 0-KM * 2 Liter Pinto * Rebored with new forged 92mm piston * New Burton Rods with ARP Bolts * Reground balanced crank * Head rebuilt with 48mm inlet & 38 exhaust valves * Light weight English Rockers * Light weight fly wheel with twin plate clutch * Twin 45's with new kits throughout * New oil pump * New alloy sump & pickup SUSPENSION: * Billsteins all-round GEARBOX: 0-km * Sierra 5 speed with close ratio straight cut kit " English 3J" * All new

Fresh from Europe *** 2023 Porsche Mobil 1 Supercup Car # 2 Harri Jones *** We are honored to present a very unique opportunity to the Australian Motorsport community. Out of the Porsche Supercup Season 2023, one of the three top Lechner Racing Porsche 992 Cup cars has landed in Australia. The car was driven (piloted) by Harri Jones in his Rookie season where he finished in 2nd place. Again congratulations from our side. The car comes in its original BWT livery, maintained to the highest stan

69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

991.1 Cup Car MY 2016 This car has been maintained as a race car competing in state level competition over the last 3 years by a gentleman racer. The car has been maintained to a high level and is turn-key competition ready. Bosch ABS is fitted making it ideal for track days or Production Sports racing. The gearbox received a full overhaul in January 2024 and has only run 150km since. A new steering rack was fitted Jun 2024. Invoices are available for all works performed over the ownership perio

Need to sell - already bought another toy! 70,000kms - 2ZZ Engine (NA) Currently full rego in TAS (was a repairable write off but has been cleared and has full rego - have pics of damage/repairs from previous owner). Ex-Exige Cup race car with full cage, CAMS logbook etc. Ohlins shocks Bigger front brakes Spent 3k on new Extractors and exhaust New hollinger 3rd/4th gear upgrade. Fully serviced recently (all fluids) and wheel aligned. Super reliable cheap fun that can hassle much faster cars a

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.

Only selling as I recently built a G4 car. Originally built for Ross Dunkerton for 2006 Targa West. Also previously driven by Simon Knowles in the Asia Pacific Rally Championship. Very lightweight and well built vehicle from Team Mitsubishi Ralliart. Well sorted and fantastic handling car. Fresh engine built by Techsport and Jeff Beaumont 216kw atw on 98 fuel. Race prepared by Adrian Stratford Motorsport and ready to enter its next rally. New Exedy Clutch Kelford Cams Motec 800 ECU and C125 Das

Heavily modified and built EVO 7 race car. Motec M800 with Motec C127 dash race logging kit incl can loom Nitto 2.3 stroker GT pumps 762 turbo with cold air intake Walbro 450E Fuel Pump on E85 Recently tuned by MPC. Made 350awkw on high boost and 300awkw on low boost on E85. New 5 speed Modena dog box (one track day old) new exedy twin plate clutch x4 Volk TE37’s 18x10.5 wheels with A050 295's. (two track days old) Velo Apex XL seats, Velo Light harness DBA competition rotors, 3 inch brake ai