317 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
RegisteredLog Book
We have decided to sell our 1983 Mercedes 280E and move on to new adventures. We have owned it for around 3 years during which time she’s participated in numerous HRC and CRC events including the Alpine Classic, the Perth to Sydney Rally and more recently, the Snowy Tour. Prior to our purchase she completed the 14,500km ‘Repco Round Australia Re-trial’ in 2019 without a fault. The Mercedes offers so many great comfort features such as auto transmission, cruise control, air conditioning and e
1
Selling a set of K&A Engineering Double up safety stands to suit a Porsche 991 cup car, in excellent condition, like new!
79
Registered
Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original
6
Brand new never used Samsonas RS90 transmission with T10 adapter, clutch shaft, shifter, strain gauge for shift cut and temp sensor. 1400nm rated. Located Kilsyth Victoria, can ship nationally if required. Only selling as the vehicle build has changed direction and requires a H pattern. Price is plus GST.
10
Roll Cage
Altered Drag Car steel Frame Nine Inch Differential Centre Line wheels Parachute. some gauges other accessories included good start for anyone who wants to get into a drag car
11
Registered
This meticulously restored 1954 Chevrolet Cab Over Engine (COE), crafted by Matt Stone Racing and valued at approximately $200,000, is a true gem with impressive modern features: - The restored 1954 cab and reproduction tub painted in metallic Hot Lava Orange sits on a Chevrolet C20 pickup chassis and has been professionally converted to right hand drive. - The engine is a 2022 model 6.2-liter LT1 V8 engine producing 343kW of power and 881Nm of torque. - The automatic transmission is a 20
227 1
Registered
When you think of iconic Japanese cars from the seventies, a number of makes and models immediately spring to mind. But if you had to nominate just one car that best represented design cues, styling and engineering from the era, it would have to be the Mazda RX-3 Coupe. When it was released here in 1972, the rotary-powered coupe was a legend-in-waiting and without question the car has well and truly achieved cult status amongst the Australian automotive community. This particular example has
10
Roll CageLog Book
Best time 8.9 sec @ 153 mph , Art Morris chassis, Mustang 2 front tubular front end, Willwood disc brakes front and rear, QA1 front shocks coil overs. Ladder bar rear end, 9” diff strengthen by Aussie Diffs 3:5 ratio, 35 spin axles, alloy front carrier, Arco rear shocks and coil overs. Heavy duty tailshaft and uni joints. Motor Dart Big M tall block , very large Brodex heads, ARP Studs,JE Piston 2618, 16:1 comp,Total seal Rings, Jessel Rockers, Comp Cam full roller 11-721-9, ATI Super Dampener,
18
This is the 3rd car built by Jack Pryor and Clive Adams and was apparently modelled of the Stan Coffey Cooper Bristol that Clive had driven on occasion. It as completely restored for me by Paul Trevethan in Melbourne and debuted at Winton in 2007 and has been running at the pointy end of Group Lb fields ever since. This Prad runs a fully worked 6 cylinder grey Holden motor fitted with a very rare Phil Irving Repco High Power cross flow head, which is mated to a 4speed Borgward transaxle. No expe
19
Roll Cage
XF Falcon Ute Toca built 440 SBF, best of everything. Engine made 920 @ 8000RPM and 918 @ 8500 RPM on soft tune. Can easy make more power. All parts in the car are as new. No expense spared. Has done 6 3⁄4 track pass 9.7 @ 140 and 9.8 @ 144... 8 sec potential. Jerico 4 speed, long v gate shifter, Ram drag race clutch. Full Race Pak sportsman logger. PST carbon fibre tail shaft. Altra 9 31 spline axels (39.6mm at bearing) Full strange centre. Split mono springs with 3 bolt positions (5/8 bolt)
4
Hussla gloss black 19 x 8.5 front rims and 19 x 9.5 rear rims to fit commodore will not fit large brembo brake applications the frons are brand new the rear were only on the car for 3 weeks they are like new Cash only pick up only
3
MSD 7720,7730,,harness, coil all new Boxed
3
Haltech 950 with complete harness New in box
3
Holley 4150 950 cfm 4150. $900 Near new Aeromotive A2000 fuel pump_10 inlet - 8 outlet. $825.00 Aeromotive regulator with -10 fittings New trial fitting only
12
Roll Cage
Price reduced for quick sale way below replacement value Unfinished rebuild and freshen up project that stopped due to health issues Presenting a very well looked after 250-inch Dragster Rolling Chassis, constructed by Bill & Wayne Jones Weldwell Engineering in the early 90's. The chassis is suitable for a small block engine, either supercharged or naturally aspirated and could be run in a blown class like Supercharged Outlaws or Modified Easy to bring up to latest specs The chrome moly rol
14
I have 4 hand held digital Race radios with headsets and chargers as well as one car mounted fixed in car radio. This system has Harris Race Radio private Chanel. I have just replaced all four hand held radio batteries. Having the car unit allows a more powerful signal this gives full coverage at tracks like Bathurst.
5
Registered
1972 Ford Ranchero Hi performance 460 big block, C6 auto transmission 2800 dominator Convertor, Strange 9 inch diff trutrac 3:7 gears, 35 spline Dutchman axles. Custom Tailshaft, vintage air A/C, auto meter gauges, Kenwood sterio system offers 6x 9 speakers. Lots of new parts too much to list here. More than $90,000 spent on car. A unique car to own in Australia. This thing is fast and turns the tyres so easy.
13
Registered
My beloved HQ Bluey is up for sale. It’s a very regrettable sale as I’ve owned Bluey for 30 years! Garaged all her life and is in immaculate condition inside and out. 202 6 Cylinder 3 on the tree 3 speed manual. Power Steering Just had a full respray and new chrome fitted. Even comes with original paperwork! She’s traveled 143 kms not miles so she’s like brand new. Absolute head turner when she’s out.
12
Roll CageLog Book
Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,
7
Roll Cage
Excellent value - A really well-sorted Lotus 7 with period correct Ford 1600 GT engine, fully rebuilt. This car has been thoroughly restored, with suspension, brakes, engine, gearbox, steering, electrics, etc, all reconditioned for use in motorkhanas. Rollbar, harness mounts, towing points and new competition tyres on wide Elan wheels all fitted for this purpose. The car is not registered, but has documentation and has had engineering advice and inspection in readiness should a new owner wish t