37 Motorsport Vehicles for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
7
Junior dragster Will suit A/JD or B/JD Motor is JR race car ZR4 3 1/4 billet race engine Shockwave clutch Mycron 660 MSD digital ignition with 2 step limiter and line locker can leave the line with button at full throttle MSD also has max rpm limiter and programable timing Have all the stuff to change back to normal coil ignition Craws 42mm carby with top bowl Well built chassis with suspension 415 chain and sprocket Car has run best of 7.81 and ran 7.91 at the last meeting with 55 kg dr
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec
7
Roll Cage
Excellent value - A really well-sorted Lotus 7 with period correct Ford 1600 GT engine, fully rebuilt. This car has been thoroughly restored, with suspension, brakes, engine, gearbox, steering, electrics, etc, all reconditioned for use in motorkhanas. Rollbar, harness mounts, towing points and new competition tyres on wide Elan wheels all fitted for this purpose. The car is not registered, but has documentation and has had engineering advice and inspection in readiness should a new owner wish t
15
Save yourself the import hassle (and costs), this American beauty is ready for the track! 2020 Corvette Stingray C8 3LT - Left hand drive import Mid-mount 6.2L V8 8-speed automatic Factory CA rims with 19" front and 20" rear Michelin's Odometer: 48,xxx KMS Perfect for track/circuit performance racing with factory GM LHD. Used as display car for Thunderbolt Run, Australia's Premiere Luxury Car Rally - www.thunderboltrun.com.au Located: Bundall, QLD (Gold Coast) Contact Vas on 0429 877
12
READ IT!!! WRITEEN-OFF VEHICLE CAN NOT BE REGISTERED The car was stolen and wrote-off by the insurance. It was found later with no damaged but status can not be changed and the car can never be registered again. It was purchased in a auction and used a few time on a race track for fun. Audi RS3 with only 28578 km VIN: WUAZZZ8V1GA910121 Size (L): 2.5L Type: Turbo Multi Point Fuel Injection Power: 270kW Power RPM: 5500 Torque: 465Nm Torque RPM: 1625 Top Speed: 250km/h Acceleration 0-100km/h: 4.3
5 1
The GTR-X was a fascinating concept from the get-go; A fibreglass body, over a steel “ladder” chassis, which may seem exotic to an Australian market, but GM had been successfully using that technique with its iconic sports car, the Corvette, from 1953’s C1. Come 1969, the Corvette had evolved to the swoopy C3 guise, featuring independent suspension, four-wheel disc brakes and wild 427 L88 spec’ motors. Along that 16 year passage, the Corvette’s early mistakes became improvements and a smooth, fa
8
Hi. Putting this ad up on behalf of my partner. Has to be gone asap so BEST OFFER GETS IT!! Rare as rare 1968 model Datsun 1600 (P510) with the inward wiping windscreen wipers that set them obviously apart from all the rest. This 68 Datto 1600 looks to be one of the first of the first with a very low build number on VIN. Still has both original matching compliance plates This thing WAS completely original when I found it nearly 30 years ago. It's been locked in my garage ever since. Body was s
20
Log Book
1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.
10
Roll Cage
Rx8 with a honda k24a3 engine and tremec tr6060 gearbox. -honda k24a3 engine, bc double valve springs and retainers, 40 degree intake cam gear, k20 type r oil pump kit -custom engine mounts, gearbox cross member and diff mounts -custom steam pipe manifold, aeroflow gtx3071r turbo, 44mm wastgate, full 3 inch stainless exhaust -custom intake manifold, intercooler piping, catch can and other extensive fabrication -600x300 intercooler, alloy radiator, oil cooler -surge tank, walbro 460lph fuel pump
8
Log Book
Professionally Australian built with American know-how. Motor is a fully worked big block Chrysler (253 cube) 3 speed gearbox, with USA quick change diff. Has triple Rotchester cars and an all alloy body. The tyres are racing 600x16 Dunlops, done 20hrs. The car itself had never been damaged and is well looked after. Last 8 years competed in regularity events in Perth. It is currently CAMS log booked. Owner is member of VSCC WA. Car garaged in Perth metro. This unique one of sprinter is modelled
14
Up for sale is our Corolla KE70, aka Nana-Spec, project car 4A-GE motor (originally out of MR2) ECU and wiring is completed Motor runs (needs the return fuel line back to the tank to be plumbed up) Hydraulic clutch installed, needs to be bled Surge tank and pump installed New exhaust system Original paintwork and interior Minor rust in lower rear outer quarter panel and front edge of bonnet, and small amount of panel work required Clean chassis and underneath Selling due to not having enough
12
Project car regrettably up for sale 4AGE-ZE motor with LA3 mod plate Cast iron Celica 5-speed gearbox Shortened Hilux diff 15” Simmons wheels Front mounted intercooler behind bar Very clean underneath, no rust in chassis Interior mostly complete, missing a couple of mouldings in boot area Exterior in good condition, a couple of small rust spots, nothing major Motor not currently running Will require ECU and partial rewire Selling due to not having enough time - have had the car for 8 years
11 1
It's time for my Humber Speedster project to be passed along to someone who can finish it. I had always wanted a pre-1920’s Speedster but as they don’t suit the highway driving of today I decided to make one from a car that could. The donor car was a ’32 Humber rolling Chassis. All the hard work has been done, and 99% of the materials and components purchased. I have chronicled the build in photographs and a blog, plus starting the engine for the first time on a video. When going through the par
11
Roll Cage
* Need this to sell quick as I need the space. Now $18.5k ONO* Unregistered, 2007 Renault Megane R26 127,XXX km's Engine is stock apart from the exhaust modifications. All mods listed below are near new, or new. Fully race ready, an amazing track/tarmac competitor. I'm looking to sell so as to move onto another project, otherwise I would keep this eccentric machine. It runs great and looks amazing - with special attention to fit, finish and attention to detail, this is not just a race pig. It
13
Hard to find V6 Busso engine 5 speed manual , Has been prepped for Targa / Tarmac rallies , but still can be an every day driver / track car , Leather interior , Air Con , electric windows etc , 146, 700 k's , Timing belts replaced recently , upgraded Bilstien suspension , Power Chip upgraded ECU , Larger throttle body , Cold air intake , New front brakes , Quick release Sparco steering wheel , Sports exhaust , external hold down / locking bonnet latches , comes with original steering wheel and
8
Roll Cage
Up for sale wa registered year 2000 evo 6 gsr rolling shell,come with full brad stacey roll cage(cost 13k+),some high quality after market parts on suspension, genuine advan racing wheels 18",come with evo 9 engine wiring.can supply evo 6 wiring as well..and also have lots of extra parts i can sell separately if require.. Note:without engine, drivetrain,rear,diff. Clean title with private num and straight body without any accident. Can project as street,track,or race car.. Genuine buyer only ple
6
Log Book
FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL
16
Roll Cage
Dive into the world of unmatched performance and luxury, presenting the transformed 2019 Aston Martin Vantage. Initially born as an elite road vehicle, this Vantage has been meticulously evolved into a racing titan, designed for the passionate and the discerning. Features and Highlights: Authentic Legacy: Starting its journey with an original price tag exceeding $300,000, this Vantage is more than just a car; it's an epitome of British engineering and luxury. Expert Conversion: Carefully meta
9
Roll Cage
For sale s13 Silvia. I've owned the car for over 10 years and have decided its time to let it go. ENGINE 450hp at the hubs on E85 Forged ross piston and spool rods Brian Crower 264 cams Upgraded valve springs R35 coilpacks Kinugawa TD05-18G turbo Steampipe manifold Alloy radiator with AU thermo fans Oil Cooler with remote filter Bosch 1650CC injectors Turbosmart fuel reg Bosch 044 fuel pump with surge tank Haltech Elite 1000 with a custom harness LS alternator DRIVELINE BRAKES PAR engineer
9
5.4 lt rare manual V8, 5th anniversary (only two for sale on car sales) most of the work has been completed. the car needs the interior finishing, we have no time due to work and other commitments. mostly motorsport, have all receipts for the parts and the repairs completed. will need to go for a wovi inspection once finished. original right rear quarter damage (see photo) has been repaired by a local panel shop, if you have the time to finish it. this is a great car and drives great.