62 items for sale
Most Recent
Most Recent
Keyword
Category
Price
Listing Type
Featured ads
All Results
19
Roll CageLog Book
Nissan R33 V spec GTR Was built from a STD Car Ground up , It has been built and revised over the years for WTAC but could be easily raced in Sports sedans with minimal mods Only the Best of the best parts have been used Engine Bullet Billet 3L Block Built by MOSTECH in qld and only done one WTAC 2022 since build 3.2 Stroker Supertech Dual Springs with Titanium Retainers OS Giken Cam Gears Avaid Dry sump pump with ross Billet 2WD Pan Peterson 3 Gallon Oil Tank Cam and crank Trigger
9
Log Book
Perfect base for IPRA build/24hr Lemons/ BEERS/ Cheap Car Challenge and similar budget enduro racing series SR20 and 5 speed, both in good condition Full service done including all fluids, filters and spark plugs Weld in Rod Kilby full cage with intrusion bars Kilby modified bride seat runners (driver and passenger) - allows for easy driver changes Race seat and 3 inch harness Brand new DBA rotors Brand new Winmax pads front and rear Brand new braided brake lines Brand new front camber pins Bra
7
RegisteredRoll Cage
Street Registered Full Bridgeport , doweled, 13B turbo RX7 manual FC Series 5 Turbo GT Edition Lots of brand new parts: * As new custom paint/wrapped * Modification plate for half roll cage and 2 x seat conversion * Big single turbo conversion, custom exhaust * Brand new full parts shop max steering and camber upgrade, front and rear, including coil overs * As new PWR 55mm radiator with heavy duty SPAL fan * As new PWR oil cooler with new SPAL fans * As new PWR street series intercoole
27
Roll CageLog Book
NSW and Australian Super sprint Championship winning vehicle, multiple times. Only selling due to moving interstate and downsizing property and ability to store and maintain multiple vehicles. Ok here we go. Bond Roll Bars weld in cage with roof cross bars, Carbon Fiber Hard Top, Garrett 2870 High Mount Turbo system with Haltech Engine management system, 165kws at the wheels on the Dyno at only 13 pounds Boost. Engine and Gearbox and clutch in great condition. Locked differential, New exhaust s
9
Roll Cage
Nissan Pulsar SSS N15 You're choice, repair or re-skin. From rear shunt body damage. IPRA 2L engine. Header large bore exhaust. Alloy radiator, Electric fan, cold air induction. Series yellow line Suspension adjustable, rear radius bar, quickshift. Full instrumentation including tacho with adjustable shift light. Water temp original plus extra gauge oil pressure. Cams accredited bolt in cage. remote mount battery. Power steering. DBA rotors, Winmax pads, vent to front brakes. Dual battery isolat
7
Roll CageLog Book
The ex Grand Prix Mazda/Murray Coote Group C Touring Car and Group A Rally Car. Raced in the QTCC and some ATCC races 1982-1984 winning the Under 2L class of the QTCC in 1983, in 1985 it was converted to a Group A rally car, winning the Queensland Rally Championship that year, and the QLD round of the Australian Rally Championship. 1982 Mazda 323SS (not Familia) with twin carbs, 5 speed, pedal box, healthy refreshed/dynoed engine. Part converted back to Group C specification, requires some bo
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando
10
Registered
Hand built ac cobra 6lt L76 chev, t56 6 speed, jag front and rear suspension. Ladder bar chassis, fibreglass body. Fully engineered with act rego. This is a very nice driver and is a great road car as well as track car, very comfortable on road or track. Ring for more details.
12
Roll CageLog Book
1961 Ausper Formula Junior T3 Chassis: T 304-2 Very rare Ausper Formula Junior, likely to be one of only two remaining cars. Recently campaigned in the FJHRA/HSCC Silverline UK Championship although eligible for many other events worldwide. The car has current HTP (see images above) and has just been fitted with a newly rebuilt Richardson engine which has been dynoed at almost 130 bhp. You can see a start up video on YouTube here: https://youtube.com/shorts/9aqo1UxHE6c and a walk around
7
Roll CageLog Book
Mazda RX7 Sports Sedan. Ex Ivan Mikac Go-Gear built car. Ground up restoration 2018-2020 including chassis/body, transaxle and engine. 2021 Tasmanian State Champioship winner. 12a turbo, Hewland FGB with long and short track ratios, spare set of wheels with slicks. Short and tall drivers seats. Can assist with transport if required. May consider sports sedan project as part payment.
6
Roll CageLog Book
Selling new RX8 Bathurst 6 hr car, raced Bathurst 6 hr event. Built to the Production regulations for the Bathurst event. New AP brakes. Every component new and serviced. Spare package with spare new engine and gear box and wheels available. Over head Fuel rig with new hoses available. Perfect car to race reliably and cheaply in any 3E Production race or the Bathurst event.
7
Roll Cage
Up for sale is my 13b turbo bridgeport rx7 that is track or race ready. Spent over 140k currently running on e85 with the wolgborner efi turbo has a full weld in cage. Endless brakes
10
Roll Cage
Set up for drag racing 13b turbo engine - 640 rwhp (last dyno) Power glide gearbox (newly rebuilt) with 7500rpm stall with bump system Microtech LT10s ecu - 3 bar & 2 step Handmade 9" diff, Mark Williams alloy center 35 spline axels 4.8:1 4 link suspension and coil-overs not pictured: wheelie bars, parachute
6
$35,000 as a roller OR $50,000 as a complete car 1/2 CHASSI CAR series 6 bridge port turbo Air shifted liberty Floating 9" 4 link rear Koni's plenty Shocks and sway bar Runs easy low 8's plenty more in combo MW Ignition Data Logger new parachute new front tyres new rear slicks new harness Andra and IHRA TECH INSPECTED
9
Roll CageLog Book
Mazda in excellent condition, recent service, garaged, Mazda BP GTR Motor with factory Ihi ball bearing Turbo, 221 KW @ rear wheels s/5 gearbox, new h/d tailshaft triple plate tilton, alloy flywheel 4.11 detroit locker.S/4 breaks all round ht 10 pads new front koni struts, harness, autometer gauges intercooler spray 48’s. CAMS log book. ID plates and could be registered if changed to roadworthy.
6 1
Roll CageLog Book
For sale is the Dick Ward Go Gear sport sedan. As built and driven by Dick in sport sedan races in the 80s. This car presents in excellent condition. - 13b PP engine using MFR factory peripheral port housings and making 300hp. - Hewland transaxle stamped as ex F1 F.Williams. - full chromoly space frame chassis - magnesium uprights - lots of top spec features as raced in the day. - 600kg makes it an absolute blast to drive and extremely fast This car is eligible to run as invited in Historic
3
20B PAC race engine Billet centre plate Billet 2 piece crank Tail 60mm wastegate Blackbox computer Big Garrett turbo Front mount cooler Dry sump setup Methanol Extra injectors Gforce5r manaul gearbox 9inch full spool diff mark Williams 35spline axles Willwood brakes Deist parachute Fire system Funny car cage Alumastar wheels To many things to list Car has gone a best of 7.6 @ 187mph No time wasters or low ballers please
9
Mazda RX8SP Tarmac Rally Car Drastic price reduction - must sell. Turbocharger, intercooler etc. removed and sold separately. Engine just rebuilt by Raceonly. First Owner was Mazda Australia, this is the genuine article – not a replica. Built for Allan Horsley with the purpose of winning Targa Tasmania. A ‘best of everything’ project Allan hoped to repeat the success of the RX7SP. Magazine article here: https://www.carsguide.com.au/car-news/mazda-looks-to-next-targa-24061?fbclid=IwAR3d3luBSSeLK
16
For sale, new RX8 Cup race cars. ready to race in the RX8 Cup Series. very cheap way to race in a one make series with RX8 rotary cars. All built with new race parts ready to hit the track in a fast growing National series and CAMS state championship. cars are all the same spec.Fresh running gear. 2 cars to choose from, silver or yellow.
5
Registered
This car has all RX8 Cup compliance parts which also makes it eligible for series production. It has MCA Suspension, Speedy Wheels, MOTORSPORT AUSTRALIA National Spec Cage & Logbook. This well sorted car and has been a proven performer in the RX8 Cup series. It has a low hours engine and freshly rebuild gearbox as well as all fresh fluids. The car also has Endurance style Belts, and an adjustable HTE seat. By simply adding a WING it is completely ready to compete in RX8 Cup. Or don't add a wing