42 Circuit Racing with Roll Cage for sale

E30 M3 Replica (unfinished project) Straight, rust free donor shell Fibreglass M3 body kit (doors and bonnet Mike Shaw Fibreglass NZ. Wings, rear window frame, front bumper assembly, boot spoilers etc from Pesch Motorsport). Fire barriers installed between boot area and cabin. 95% complete, ready for paint or vinyl wrap Roll cage built by Brad Stacy Fabrications (builder of Aussie Invader cage), log booked with CAMS. 6 point national rally spec. Full build photos at: https://bradstacyfabric

BMW 135I built for Bathurst 6hr, only 2 meeting old , finished 12th out right in 2022 . Car was built by David leny motor spot & helped by Barry graham. Car comes with spares we take to Bathurst, no money to spend and is ready for Bathurst 2025 . Car has Supashocks all round , new seat and belts Call chris for more info and photos.

Great entry level car, reliable quick and cheap to run. National Roll Cage Only V6 2.5 litre Galant / Legnum hologated with CAMS for production cars. LOG booked. Original motor 159kms, turbos HAVEN'T been played with Factory boost level. with Controller. Launch Control BC Adjustable Coil Overs plus top camber adjusters, new brake pads and oil catch can. Timing belt and Hydraulic tension done recently. GTO 4 spot calipers, still have originals 2 spot Loads of extras. 3 sets of rims and semi slic

Own a piece of history. 2017 BMW M4 GT4 Accepting Offers, enquire now. Don't miss the chance to jump into the rapidly expanding GT4 Australia category, with this race ready and proven BMW M4 GT4. 2018 Bathurst 12 hour winner, at the hand of Tony Longhurst, this car has been parked up as a collection piece for much of its life since. Brought out of retirement for the 2023 Monochrome GT4 Australia competition by its new owner, it competed competitively, taking multiple podiums, while being

Ex Mirage Cup Car bought with no prior damage, the car was raced in western australia under IP 1600 rules then converted to under 2ltr with no expense spared. Motor: JE pistons Carrillo rods Rubuilers crank Jun Cams Extensive headwork Dry Sump Butler tuned length extractors ( 10 hours on motor, comp is 250 on all cylinders) Gear box: RallyArt close ratio gearset Albins 5.1 crownwheel pinnion Kaaz 1.5 lsd Quatermaster 5.5 inch twin plate clutch ( 10 hours) Car: Motec m400 Custom ali fuel ta

For Sale is my Evo 7 RS fully serviced and tuned by Insight Motorsport in Sydney. Everything has been checked, refurbished or near new. Significant $$ has been spent on the vehicle with extensive weight reduction. Race weight with all fluids and approximately half fuel is 1305Kgs. Eligible for many race series. Power is 390kw at all 4 Wheels at 28 psi (E85) Also Tuned at 316kw at all 4 wheels on 23 psi (E85) Car is painted not wrapped. Car has Log books. No accident history! Engine: 2.

Race and round winner in the Sports Sedan Vic State Race Series last time out, Sports Sedan or Improved Production race car , dry sumped 2.2 litre, fresh engine , Modena 5 speed just freshened , 6 pot and 4 pot calipers , supercar rotors , 3 way shocks , new turbo and exhaust , most of the running gear is one meeting old , Philip Island 1.38s Sandown 1.14s Fast car ready to race , multiple sets of wheels , spare drive shafts and other spares , 420 kw on 28 psi , you will not go faster for the

E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Well sorted,highly competitive Group NC HTC.nothing to spend.comprehensive spare parts package.Dyno tuned Korman spare race engine with manifold and carbies,six sets of wheels 13x6 and 13x7.5 speed gertrag gearbox and tailshaft to change car to five speed.spare close ratio four speed gearbox,spare panels,radiator,two lsd differentials 4:4 4:8..list parts available on request.car is available with spares minus spare race motor for $40,000.spare race motor available seperately for $18,000. .

Group 3E Production touring car....2023 Australian Production Car Championship A1 Class winning car. Just completed 4 from 4 wins at recent Bathurst International. Engine 1 meeting old...comes with comprehensive spares package including panels , long engine , and gearbox. 12 wheels and tyres, new unused AP Rotors, pad sets, springs suspension and driveline parts. Car was completely customed wired at beginning of 2023 season along with new Motec PDM's and Dash at a cost of $40K. New 6 spot AP Ra

Ready to race and built for Circuit Racing and Time Attack, this is one of SA's fastest Evos! Or if you're looking for a very tough streetcar, it's fully road registered, and in a couple hours you can swap over to the street parts and drive it every day. You're basically getting 2 cars in one depending on what you want to do with it. It's won SA Time Attack trophies in every event it's ever entered. Fresh built 2.35 Stroker with only 100kms since rebuild. Making 377kw @ 32psi on e85 track tun

Rolling , Caged Evo 8 Shell MA certified fully welded Roll Cage , thru to front towers . Serial 73367 ( 2023 ) All Cross Members , Suspension , Arms , Steering Rack , Column & Wheel , Fuel Tank , etc Wiring Loom Rear Brembo Brakes Sump Guard Mount Fabricated Gearbox under member Carbon Fibre Door Cards , Foot Plates Ralliart rear Stone Shields Carbon Fibre Air Box Spare Rear Hubs Spare rear Suspension Arms

E36 coupe S50 B32 M3 motor, Zf 5 speed, locked diff ,Tilton clutch, two sets of 17 “ wheels, one brand new set of Yokohama AO50s, Ford front brakes, new AGI bolt in 6pt cage, power steering, swirl pot, thermo fan, Craig Davies thermo switch, just getting log booked. Times on Nankangs and Federals: Phillip Island -1.49.7 Sandown 1.21.9 Would get better times with the AO50s, photos help description.

$32,000 negotiable, contact me to discuss. This car has been campaigned and developed in the Queensland Touring Car Championship over the last couple of years, it has placed second in category B and is a rapid, reliable and well developed car. It has lap times posted of 58.9s at Lakeside, 86.1s at Morgan Park and 84.1 at Queensland Raceway. These times were set on budget Zeknova slicks and we think there is a bit more time in it. Ideal for someone looking to race this year in QTCC, Replica

2016 BMW M3 build by and purchased from Bruce Lynton Service team prior to 2022 Bathurst 6hour which was this cars first race and placed 4th in class. It has also won the 2022 Australian Production Car Championship. The car has been built and serviced with no expense spared and constantly developed to be a very competitive and reliable package as proven by its race results. Car Qualified on the front row for 2023 Bathurst 6hr and finished P2 only 2.7 seconds behind the winner. Car is fully pre

I have for sale my BMW M4 3E Production Race Car (No longer includes Bathurst Entry) Many wins and 3rd in 2023 Bathurst 6HR, only 4 seconds off the winner after 6 hrs of racing. This car is very competitive and a must-have if you want a chance to win the Bathurst 6HR or want to run NSW/QLD State Series or APC. Years of development work and more money than I can remember creating a very reliable race car. Strict maintenance records and race data can be provided. The car can be sold as is or as a

Built by "KirksWorks" Race Service in 2023 for Queensland and Australian Production Cars (QPC/APC). M2C was built for myself with top quality parts and labour. A regretful sale as i would like to participate in National GT4 Championship 2024 so i need it gone and get an GT4 spec car (M4GT4). If I won't sell it for that price I'll do a APC/QPC in 2024 season. - Had it since new and serviced every 4000-5000km. Currently 50K on the clock. - Full race car build can be found on Instagram - vodkaa_r