20 items with Roll Cage for sale

3,000kms presents as new. Manthey Racing options. Log booked. Never raced. Launch livery in immaculate condition. 2016 Porsche 981 Cayman GT4 Clubsport in fantastic condition. Manthey Racing options Only 420 ever made Amazing car with only 3,000kms Books Logbooked 2 sets of wheels (wets/slicks) Air Lance Large tank centre fill Paddle shift Never raced door to door Delivered new to Australia not raced in Europe or USA and imported!

E36 328i manual coupe for sale, successfully super sprinted throughout 2022 and 2023 with BMWCCV and MSCA. Fantastic car. Progressively improved with a mostly stripped out interior, upgraded wheels, tyres and brakes, race seat, harness and 6 point roll cage. Unfortunately, I don’t have time to keep racing, so after 2024 off the track I’m putting it up for sale. $15,000 as listed. Call to discuss or arrange an inspection. Details below: 1995 BMW E36 328i Coupe ⁃ M52 2.8 litre engine ⁃ 5 speed

Toyota 86 Scholarship Series car. Set up and ready to race in the Toyota Gazoo Racing Australia Scholarship Series. Brand new sealed engine has done 1 race meeting. Comes with log book. Spares include,: : Spare set of wheels : Gearbox : front shocks : plenty of other parts. : complete production car conversion

Toyota 86 Race car project , car is stock other than a Brown Davis roll cage to the soec of the 86 series , i still have all the interior parts , car has new track day tyres , never been on the track , never crashed , car is currently still registered but its sold as is no RWC .

For Sale is my well prepared BMW E30 323i. It is fully log booked and has the 2.5L motor from a 325i and is fully built and compliant to the BMW E30 racing specifications and can also run in 3J improved production. The car is a consistent front running car having achieved race podiums and 3rd place at Victorian State Circuit Racing Championship round 3. The car has had various upgrades throughout 2023 and has been well looked after. Other details and specifications include: -Bilstein double ad

Countless hours spent building this car as it was my childhood dream of having an E36 like this with a straight 6 M50. I was planning to get it turbocharged (iron block handles safely 350-400hp without internal mods), plenty similar builts done like this at “M50 Turbo Builts” Facebook Group, but life throws some curve balls and sadly I need to sell it. Plenty of photos and videos on my Instagram www.instagram.com/racingrenan BMW 325 Track car prepared by Lyus Racing in WA. Happy to assist with

Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

ST185 GT-4 Wide Body 4wd 3SGTE. Built for Track/Hillclimb/Tarmac. Full cage, Harness and Velo race seat. Forged internals, CP pisons, eagle rods, all balanced, BC 264 cams, BC Titanium retainers and heavy duty valve springs, Turbosmart WG40, Link G4+ ECU, Garrett Turbo, Boost 6 Manifold External Waste Gate, XTG clutchFront Mount Intercooler, Walbro pump etc. External engine oil coolers, remote oil filter......... Conservatively tuned to 275Kw and 678Nm at 17 psi on E85 when it ran out of inje

E30 M3 Replica (unfinished project) Straight, rust free donor shell Fibreglass M3 body kit (doors and bonnet Mike Shaw Fibreglass NZ. Wings, rear window frame, front bumper assembly, boot spoilers etc from Pesch Motorsport). Fire barriers installed between boot area and cabin. 95% complete, ready for paint or vinyl wrap Roll cage built by Brad Stacy Fabrications (builder of Aussie Invader cage), log booked with CAMS. 6 point national rally spec. Full build photos at: https://bradstacyfabric

Bmw e30 race car Log booked improved production 3J Used for club sprints & hill climbs M20 2.5 litre with getrag 260 & LSD. Koni adjustable shocks all round with coil overs. Eibach front springs and customr ear springs. Fabraications built roll cage. Cobra seat Genuine BBS front bumper can come with car based on negotiation. Too much to list. Great fun car

R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also avalable at extra,Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage cams apro

1992 S13 Nissan Silvia. SR20 DET Log Booked Race Car 8 Point Tower to Tower roll cage. Comfortably fits 6’4” driver MCA coil overs with remote reservoirs SR20 built and tuned by JPC 260kw at the wheels Garret Turbo Intercooler sprayer Motec Computer with standalone engine loom Motec Dash S14 5 speed built by Neat Gearboxes 2 way Diff Strengthened S14 rear subframe Fully adjustable rear suspension with alloy knuckles S14 front X member and strengthened LCAs Alloy fuel tank Surge tank Braid raci

DESCRIPTION: Nissan R32 Skyline GT-R, Year: 1989 Powerful neck snapping performance ! 2-Door Coupe, All wheel drive Odometer: Indicating 127,512 Klms Engine: 2.8 Lt Turbo, Transmission: 5-Speed Manual, Grey Seats x 4. Currently tuned to be “run in” with new engine build by C - Red in Perth and built to performance specifications. Roll Cage Engineered in NSW by Phil Scoll – Automotive Consulting – as a Modified Production Vehicle. Work carried out by Peter Hopkins of Advan Performance.

BMW e46 m3 Sports sedan, as raced in the national sports sedan championship finishing 3rd in the last 3 championship seasons. -Aerodynamically enhanced carbon fiber body work -SB2.2 nascar engine, individual throttle bodies, drive by wire -Paddle shifted holinger rd6s -Motec m150gprp with upgraded logging, c187 data logger, motec pdm, all the allowable creature comforts such as traction control. -Double wish bone front end with billet uprights, live axle 3 link rear with camber adjustment, Ohl