23 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
6
Roll CageLog Book
Front running NSW MX5 Cup car. - NA motor built by Herring racing Bottom end one season old and head has only been run at one race meeting - New kaaz 1.5 way diff one round old - 6 speed gearbox rebuilt, one round old - Haltech Elite 1500 ECU - FRP short shifter - on 949 6UL. Multiple sets of wheels can and tyres can be negotiated with sale - near new high quality national spec cage built by ministry of fabrication - 9lives racing aero Has run 1.47 at SMSP GP track on old tyres. Capable
11
Time has come to sell the reserve race car. Was purchased as a stat write off (fresh water damage - sunroof left open) 195k on the clock Heavy duty clutch BC coilovers Whiteline front and rear sway bars and link pins with rear braces Front strut brace Afm gauge Boost gauge Turbo back exhaust (has scrapes on mid pipe so minor exhaust leak) Invidia mufflers May have a tune on it but would suggest having your turner check. Car drives very nice. gearbox feels great. Engine sounds clean and ver
10
track car all wheel drive built for pheasant deputy 4 hr series aasa log book 2 sets of wheels radio intercom new clutch fitted new timing belt race brake pads cheap track car also suitable for production car racing
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
9
RegisteredRoll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo
7
Roll CageLog Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car
15
RegisteredLog Book
2006 white subaru forrester STI, 6speed manual, 2.5L 4 cylinder turbo 118,000KM, Rego till January 7th 2025, New tyres, 3inch catback exhaust, Aftermarket Pioneer audio system, New Sparkplugs, airflow meter,Headlights, Mechanically A1, Some rim scratches, Selling for house deposit/ wanting a van
9
Roll CageLog Book
New IAG block with Cosworth heads PPG sequential gearbox, freshly rebuilt PWR Radiator 350mm x 700mm PWR Intercooler 350mm x 700mm Motec ECU Motec Camera DCCD pro diff controller Cusco Coilovers AP racing brakes OMP drivers seat Heated windscreen Perspex windows, sides and rear All custom subframes and front control arms 3 sets of wheels with a new set of soft Michelin Slicks Carbon front bar, bonnet, boot and wing Originally built for sports sedans but lately it's been used for time attack eve
23
Fresh built mazsport short shaft 20bpp never started, hgt 5 speed gearbox with twin plate clutch. Triple throttle bodies with manifold flanges and exhaust flanges included. The car has been fitted with an comprehensive cage bent up by Bonds roll cages and fitted by a qualified welder. Full hardrace suspension control rods including upper and lower control arms. Ap front brakes brand new and evo 10 rear. Two sets of 18×8.5+37 wheels one with khumo semi slicks. Other items included in the sale.
7
Roll CageLog Book
Selling due to lack of time/use: current owner since 2019 and only used for a handful of track days and supersprints at Wakefield and SMSP. Porsche 997.1 GT3 Cup Car Ex-Grove car in good condition making healthy power Amateur driver 1.35.8 SMSP and 1.01 WP on old rubber Fresh major service with Michael Newton Automotive with $30K+ reciepts including: - Full gearbox rebuild/refresh - 0km - Brand new clutch - Brand new brake pads - All new fluids and belts - General tidy up 3 sets of wheels/tyr
13
Log Book
Subaru WRX GC8 1999 model car has been set up for track days EJ20 5 speed timing belt water pump kit done (haltec computer) VF34 STI turbo AGI six point roll cage with harnesses STI version 2 front seats STI wheels new 17x7 +48 Nankang AR1 tyres 215x40x17 brand new (not the ones in photos) GD alloy front lower control arms STI top Mount intercooler STI strut brace Coil overs Car is ready to go nothing to spend Car is registered 12 months rego
9
Roll Cage
Mazda RX7 Series 5 FC 1991 Race Car. 13B Bridge Port Turbo ( built by South Coast Rotary) . 2 way LSD , GT 35R Garret Turbo , Microtec ECU , New Exeedy carbon twin plate clutch.2 sets of wheels. Rear wing, New fiberglass front splitter. Inter cooler and radiator as per pictures , OMP seat, New adjustable racing suspension. New rotors and pads . Heaps of spares. Available as a roller ( less engine) for $18,000 . Would make great drift car. Car is located in Kempsey NSW,
27
Roll CageLog Book
NSW and Australian Super sprint Championship winning vehicle, multiple times. Only selling due to moving interstate and downsizing property and ability to store and maintain multiple vehicles. Ok here we go. Bond Roll Bars weld in cage with roof cross bars, Carbon Fiber Hard Top, Garrett 2870 High Mount Turbo system with Haltech Engine management system, 165kws at the wheels on the Dyno at only 13 pounds Boost. Engine and Gearbox and clutch in great condition. Locked differential, New exhaust s
5
Roll CageLog Book
This vehicle is arguably the #1 Hillclimb Subaru in Australia. Winning 3 Australian Hillclimb Titles, 3 NSW Hillclimb Titles, 2 Qld Hillclimb titles and numerous club Hillclimb championships. Additionally the vehicle came 2nd outright for the 2021/22 Whiteline Tarmac Rallysprint Series. Vehicle built by Blake Engineering, is a 2006 Subaru Impreza WRX. Runnings a 450kwatw Deshelle built engine, currently tuned @ 341kw with bucket load of torque. EFR 7163 turbo, Haltech Elite ECU, wideband and das
6
Roll CageLog Book
Selling new RX8 Bathurst 6 hr car, raced Bathurst 6 hr event. Built to the Production regulations for the Bathurst event. New AP brakes. Every component new and serviced. Spare package with spare new engine and gear box and wheels available. Over head Fuel rig with new hoses available. Perfect car to race reliably and cheaply in any 3E Production race or the Bathurst event.
7
Roll Cage
Up for sale is my 13b turbo bridgeport rx7 that is track or race ready. Spent over 140k currently running on e85 with the wolgborner efi turbo has a full weld in cage. Endless brakes
6
Registered
MY06 Sti (Terry) 293kw @ 24psi High boost E85 274kw @ 20psi Low boost E85 Link ECU, Deatschwerks 1300cc injectors, Engine Rebuilt at 93,920km now 103,000 New short block, Bored and honed to +10. Manely piston, rings and pins. Nitto I beam, Nitrated crank. Race bearings (Con Rod and Mains). 11mm APR Studs. Cosworth baffle plate. Twin plate clutch APS Turbo Sr57, APS intercooler and blow off valve. Spec C Intercooler sprayer bottle Cermic coated headers Custom fuel surge system PWR radiator TS
6 1
Roll CageLog Book
For sale is the Dick Ward Go Gear sport sedan. As built and driven by Dick in sport sedan races in the 80s. This car presents in excellent condition. - 13b PP engine using MFR factory peripheral port housings and making 300hp. - Hewland transaxle stamped as ex F1 F.Williams. - full chromoly space frame chassis - magnesium uprights - lots of top spec features as raced in the day. - 600kg makes it an absolute blast to drive and extremely fast This car is eligible to run as invited in Historic
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.