21 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
2
This MX5 1998 NB race car with hard top has been expertly prepared and has been proven to be a trouble free, reliable and a consistant performer. There is no evidence of accident damage. The car weighs approx 1000 kg and produces 108 kw at the rear wheels. Modifications and equipment include: CAMS approved BROWN DAVIS roll bar. RACING BEAT cold air intake and RACING BEAT exhaust headers. RACING BEAT tubular front sway bar with adjustable end links and RACING BEAT reinforced sway bar mounts. WHI
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
10
Log booked 3E production car. 2006 Suzuki Swift Sport 3E production car with log book. Great basis for further development or race as it is. - National spec 6 point weld in roll cage (MA approved). - adjustable coil over shocks / springs. - 2 1/4 inch exhaust system, headers and AES race muffler. - Custom air intake with pod filter. - Slotted front disc brakes and custom brake ducts. - sparco race seat with 4 point harness. - limited slip differential. - Battery relocated from engine bay to pa
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
7
Roll CageLog Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car
8
Roll CageLog Book
1979 Chevrolet Monza Trans Am GT1/ Historic Sports Sedan. 1981 USA Trans Am Jerry Smith, Paul Decker Dvr, James Webb. 1980-87 SCCA. Divisional champ. Bob Blacklaw Australian Sports Sedan 1988-1996. Then displayed in National Motor Racing Museum, Bathurst until 2017. 3/4 restored to original Trans Am and Sports Sedan specs. Full body and mechanical. All the expensive work done. Chev 350 c.i. Engine new build by well know Group N Chev engineer. Muncie M22 gearbox etc etc. Original body and tube c
23
Fresh built mazsport short shaft 20bpp never started, hgt 5 speed gearbox with twin plate clutch. Triple throttle bodies with manifold flanges and exhaust flanges included. The car has been fitted with an comprehensive cage bent up by Bonds roll cages and fitted by a qualified welder. Full hardrace suspension control rods including upper and lower control arms. Ap front brakes brand new and evo 10 rear. Two sets of 18×8.5+37 wheels one with khumo semi slicks. Other items included in the sale.
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s
9
Roll Cage
Mazda RX7 Series 5 FC 1991 Race Car. 13B Bridge Port Turbo ( built by South Coast Rotary) . 2 way LSD , GT 35R Garret Turbo , Microtec ECU , New Exeedy carbon twin plate clutch.2 sets of wheels. Rear wing, New fiberglass front splitter. Inter cooler and radiator as per pictures , OMP seat, New adjustable racing suspension. New rotors and pads . Heaps of spares. Available as a roller ( less engine) for $18,000 . Would make great drift car. Car is located in Kempsey NSW,
6
Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!
6
Roll CageLog Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car
6
Roll CageLog Book
Selling new RX8 Bathurst 6 hr car, raced Bathurst 6 hr event. Built to the Production regulations for the Bathurst event. New AP brakes. Every component new and serviced. Spare package with spare new engine and gear box and wheels available. Over head Fuel rig with new hoses available. Perfect car to race reliably and cheaply in any 3E Production race or the Bathurst event.
6 1
Roll CageLog Book
For sale is the Dick Ward Go Gear sport sedan. As built and driven by Dick in sport sedan races in the 80s. This car presents in excellent condition. - 13b PP engine using MFR factory peripheral port housings and making 300hp. - Hewland transaxle stamped as ex F1 F.Williams. - full chromoly space frame chassis - magnesium uprights - lots of top spec features as raced in the day. - 600kg makes it an absolute blast to drive and extremely fast This car is eligible to run as invited in Historic
16
For sale, new RX8 Cup race cars. ready to race in the RX8 Cup Series. very cheap way to race in a one make series with RX8 rotary cars. All built with new race parts ready to hit the track in a fast growing National series and CAMS state championship. cars are all the same spec.Fresh running gear. 2 cars to choose from, silver or yellow.
9
Roll CageLog Book
Mazda 6 Diesel Race Car. Perfect Car for the up and coming Bathurst 6hr, AmChamps National Championship & State Championships. Built by Mark One Engineering for endurance racing. - Brown Davis National Spec Rollcage, - Dry Brake Fuel System - Motec C125 Data Dash - AP Racing Brakes - Tein Race Suspension - PWR Radiator - Race Comms - Boost Logger No expense spared, regretful sale due to business commitments.