64 items for sale
Most Recent
Most Recent
Keyword
Category
Price
Featured ads
All Results
2
This MX5 1998 NB race car with hard top has been expertly prepared and has been proven to be a trouble free, reliable and a consistant performer. There is no evidence of accident damage. The car weighs approx 1000 kg and produces 108 kw at the rear wheels. Modifications and equipment include: CAMS approved BROWN DAVIS roll bar. RACING BEAT cold air intake and RACING BEAT exhaust headers. RACING BEAT tubular front sway bar with adjustable end links and RACING BEAT reinforced sway bar mounts. WHI
26
RegisteredRoll CageLog Book
Classic Mazda Rotary Rally Car. Spent nearly all of its life in a shed, has never needed rust repairs. Strong Mazda 12a 6port rotary motor, 4 speed, RX4 Manual Gearbox. Starts, Runs and drives as it should. Pops flames, bangs and crackles on trailing throttle. New Mazda LSD with 4.4 gears in a RX3 diff housing. Engineers Certificate, and Cams Logbook. Was on full Vic Reg, now on Club Plates. Never been a rust bucket but has been on a few Rallies. Check out the Photos as from part of the descrip
9
Roll CageLog Book
FG Ford Brute Ute. Ex SRT race Ute, 5ltr coyote cragsted engine, Tremec TR-6060 6 speed Transmission, AP brakes, Motec computer, Supa shocks, new radiator, brakes, wheels & tyres - slicks & semi slicks, power steering. Lots of $$ spent. Heaps of spares. Raced in HiTec oils tin top series, Stock Cars Aust muscle class. Motor Sport Aust Log Book. Great fun car to drive & race ready. Call for more info work hours 03 59 401 800
12
Registered
LSTV 8 ONE OFF FORD FGX XR8 Built September 2015 -1 of only 98 built “Smoke” 6 speed manuals. -Fitted with FORD PERFOMANCE ALUMINATOR SUPERCHARGED 5.0 LITRE CRATE ENGINE (Engine Number Stamped to match Original Build number and Vic Roads) (Original block/motor available as part of sale. Motor is stripped down and would need some work before re-assemble) - 457 KW (615 HP at rear wheels) 743 nm torque (35% more than limited edition “sprint” series) -9:5:1 Mahle forged low compression pistons
9
Roll CageLog Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
42
Roll Cage
Overview: • This Chevrolet Camaro has been with its current owner for almost a decade after acquiring it from Tennessee and shipping the car to Australia • Under its previous ownership in the USA, the car ran in the Sports Car Club of America GT1 and GT2 classes • It sports a new AR Bodies muscle car shell on a Panoz chassis that was assembled by Penske Racing to an incredibly high standard • Under the bonnet sits a Chevrolet LS1 engine putting down 400hp to the rear wheels • The Camaro has bee
36
Registered
2020 Chevrolet Camaro ZL1 Coupe 10Spd Auto 6.2SC LT4 - 1 Owner - Build #0038 - ONLY 830klms from new - Highly Collectable HSV - Totally Original We are proud to offer to you this great opportunity in securing this highly collectable never to be repeated ''build'' #0038 Camaro ZL1, one of the first delivery Camaro ZL1's for the public allocation of 375 Camaros made for the Australian market through Walkinshaw Performance who made the ADR/conversions for the local market. This stunning and truly
17
1982 Ford Falcon Dick Johnson Redroo Tribute car currently racing in Touring Car Masters in New Zealand .number 117 I’ve owned this car for 16 years and raced it on every race track in New Zealand and raced at Sydney Motorsport Park, Bathurst 1000 Twice , Bathurst International once and Adelaide 500 once all with Touring Car Masters Australia. Development the car over the years to a fun reliable Muscle Car . Numerous trophies gathered over the years .The car has fully homologated Motorsport NZ
40
Roll Cage
2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh
42
Roll Cage
Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh
4
Roll Cage
One of the original WPS Supercars, Driven by David Bernard. It was originally built by 00 motorsport. Sequential gearbox, Has been stored for a while but is still in excellent condition. Willing to help with shipping arrangements. Logbook can be sourced through Cams Australia.
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
14
Roll CageLog Book
This is a unique piece of V8 Supercar and Dick Johnson Racing history and has only had two owners after its time at DJR. Originally built as an AU model Ford Falcon V8 Supercar, this car (chassis DJR AU12) was converted to BA bodywork by DJR and became a part of the Bowden Collection of cars before being purchased by its current Queensland-based owner in 2014. Raced by Paul Radisich in Shell Helix colours for DJR as the #18 Falcon during the 2001 (winner of the Perth round of the championship)
3
Roll CageLog Book
V8 SUPERCAR DRIVEN BY JAMES COURTNEY, SHANE VAN GISBERGEN, SCOTT MCLAUGHLIN Stone Brothers Racing Ford Falcon BF Chassis SBR15BF507, ex-Shane van Gisbergen SP Tools chassis with an amazing SBR V8 Supercar history and driven by some of the biggest stars of the sport. The car has had a full chassis up body restoration by Richard Atkinson in New Zealand. Bathurst runner-up car in 2007 driven by James Courtney and David Besnard for SBR. The car became Shane van Gisbergen’s SP Tools car for the s
8
Roll CageLog Book
S3 RX7 Rally car, fresh rebuild with only two events since completion. (2022 Alpine, 2023 Southern Cassic) 13B Bridge port with 48IDA, approx 250hp ATWs, stainless extractors, remote oil filter, new PWR oil coiler with new oil lines RX8 close ratio gearbox S3 4.89 LSD with strengthened housing MCA with remote canisters, two events old S4 steering, struts and 4 pot calipers All new wiring loom Twin carter fuel pumps Braided fuel and brakes through out Pedal box with Willwood cylinders Hydraulic h
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
14
Improved production 3J 6cyl, Falcon Motorsport Australia log booked. Can be run in APRA, Production Cars, Improved Production Etc. Has run in Vic state series last 2 years, doing 2:02 at the island and 1:31 at Sandown. Will come with a Windsor, kframe, Bellhousing, ecu and wiring harness plus heaps of spare panels and wheels with tyers. (does not include camera setup) Fully sorted car. Selling because I am upgrading. Located Russells Bridge Vic 3331
20 1
Roll CageLog Book
This RS is a CAMS log booked ex-Targa Rally car and mod plated for all modifications in the car shoudl you want to register it for the road (half cage mod plate, front legs need to come out for roadworthy to re-register, easy bolt in job). Details: - 22,000 kms - Head Gasket recall done at Ford - Velo driver and passenger seat with Velo 6 point harnesses all in date - AGI National Rally Spec Roll Cage (CAMS certified) - MCA Custom Red Series Coilovers with multiple spring rates supplied with th
16
Roll CageLog Book
Ford Falcon Supercar - refitted as a BF. Currently running in Sports Sedans as 3D Roush Yates Ford Nascar D3 358 engine making 825 HP with low hrs since re-build Motec M150 ECU Motec C125 Dash Motec PDM Holinger RD6 with Holinger paddle shift Tilton Clutch Tilton pedal box AP COTF 18in brake package Ohlins TTX dampers built by AD Racing Shocks Morrison 8 throttle body intake manifold with dirve by wire Dailey engineering dry sump Fire bomb Car is in great condition A fast car ( top 10 finish in
11
Roll CageLog Book
Race Car Transporter - 45 foot - Fully fitted out - Fits 2 cars. Electric Hydraulic Tailgate (refurbished) - lift up to 2 ton. Honda Generator, Air Compressor, 240 volt lighting and power plugs. Large Fridge Freezer. Stainless Benches and 6 Large Lockable Tool boxes. 20 ton Press. Cabinets and Wheel storage. Battery Charger and internal lighting. LED Lights, new tyres and service. Just had roadworthy and Registration. Australia wide delivery available. Located in Melbourne, heading to Perth next