26 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
19
Roll CageLog Book
Now available at Muscle Car Warehouse is one of the most iconic and most successful Chev Monza to grace Australian circuits was the wild-looking Bob Jane sports sedan. It was the last car Bob Jane raced in anger, before hanging up his helmet. The big-winged monster, built with a liberal dose of Aussie ingenuity, was also raced by fellow greats Peter Brock, Allan Grice, Dick Johnson, Bryan Thomson and Brad Jones. It all started way back in 1978 for Bob Jane and this Monza in the United States aft
3
Roll Cage
Brand new motor 30k fully recond gear box 7k both one meeting old car well maintained as new body comes with 2 spare sets of wheels 5 gear sets and 7 sets of springs plus sway bar
4
Roll Cage
Fully recon motor 18k fully severed gearbox 4.5k both 0km car well maintained body like new 2 spare sets of wheel 5 gear set 7 set of springs extra sway bar
172
Roll CageLog Book
*Price reduced* If you think the Subaru WRX 22B is rare at 424 units globally then the car you are looking at would have to be the holy grail of Japanese classics. Only 30 cars were manufactured by Ralliart UK of which 20 were painted Scotia White and a mere 10 finished in Satellite Silver. And this particular Satellite Silver RSX – first registered in the UK and imported into Australia in December 2000 - is believed to be the only one in the country. To say this is an exceptionally rare ca
10
Roll CageLog Book
For Sale is my well prepared BMW E30 323i. It is fully log booked and has the 2.5L motor from a 325i and is fully built and compliant to the BMW E30 racing specifications and can also run in 3J improved production. The car is a consistent front running car having achieved race podiums and 3rd place at Victorian State Circuit Racing Championship round 3. The car has had various upgrades throughout 2023 and has been well looked after. Other details and specifications include: -Bilstein double ad
19 1
Roll CageLog Book
Properly built from front to back with no expense spared. This vehicle was bought in by Mitsubishi Australia and built by Steve Hoinville. Was then bought to the spec you see here by Alan Heaphy (team Principal of Mitsubishi Ralliart, Manager of Gibson Motorsport R32 Program) Very competitive production car from day one with multiple wins. Starting from scratch with a brand new 9 this car was a ground up build. Quick specs: Full national level cage (Tarmac spec) (whole interior stripped an
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
12 1
RegisteredRoll CageLog Book
Only selling as I recently built a G4 car. Originally built for Ross Dunkerton for 2006 Targa West. Also previously driven by Simon Knowles in the Asia Pacific Rally Championship. Very lightweight and well built vehicle from Team Mitsubishi Ralliart. Well sorted and fantastic handling car. Fresh engine built by Techsport and Jeff Beaumont 216kw atw on 98 fuel. Race prepared by Adrian Stratford Motorsport and ready to enter its next rally. New Exedy Clutch Kelford Cams Motec 800 ECU and C125 Das
11
Roll Cage
E30 M3 Replica (unfinished project) Straight, rust free donor shell Fibreglass M3 body kit (doors and bonnet Mike Shaw Fibreglass NZ. Wings, rear window frame, front bumper assembly, boot spoilers etc from Pesch Motorsport). Fire barriers installed between boot area and cabin. 95% complete, ready for paint or vinyl wrap Roll cage built by Brad Stacy Fabrications (builder of Aussie Invader cage), log booked with CAMS. 6 point national rally spec. Full build photos at: https://bradstacyfabric
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
4
Roll CageLog Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin
8
Roll CageLog Book
1979 Chevrolet Monza Trans Am GT1/ Historic Sports Sedan. 1981 USA Trans Am Jerry Smith, Paul Decker Dvr, James Webb. 1980-87 SCCA. Divisional champ. Bob Blacklaw Australian Sports Sedan 1988-1996. Then displayed in National Motor Racing Museum, Bathurst until 2017. 3/4 restored to original Trans Am and Sports Sedan specs. Full body and mechanical. All the expensive work done. Chev 350 c.i. Engine new build by well know Group N Chev engineer. Muncie M22 gearbox etc etc. Original body and tube c
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki
10
Roll CageLog Book
Bmw e30 race car Log booked improved production 3J Used for club sprints & hill climbs M20 2.5 litre with getrag 260 & LSD. Koni adjustable shocks all round with coil overs. Eibach front springs and customr ear springs. Fabraications built roll cage. Cobra seat Genuine BBS front bumper can come with car based on negotiation. Too much to list. Great fun car
18
RegisteredRoll CageLog Book
38 Chevy 350 power, steering air conditioning airbag suspension in excellent condition will not be disappointed
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s
6
Roll CageLog Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car
10 1
This is a Great project car in excellent shape with a lot of spares, here is a list of parts and more pics on request. Here is a youtube link to a walk around video https://youtu.be/c_a-r3iK0fA Body in good shape all original steel doors and front fenders, smooth firewall and custom a/c bulkhead mounted. Have the front and rear bumpers all the side glass all the hardware etc. Chassis is completely finished powered coated,