16 Car, Bike or Kart for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
8
Registered
This was my daughters car which she has owned for 12 years and enjoyed every moment. Car is presently at my place which is about ten minutes past the Newcastle end of the freeway. Car has never been modified in any way and has been well maintained. Mostly highway mileage. Nothing needs to be done on this car. Just enjoy it. NSW rego paid until May 2025. 166kw five cylinder low boost turbo engine has 320Nm of torque, 6 speed manual gearbox and Recaro seats. The few times I have driven this car I
5
Roll CageLog Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
15
Roll Cage
No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.
11
RegisteredRoll Cage
FORD FOCUS RS AWD LE Purchased new 2018 - 1 owner. 2018 FORD FOCUS RS LE 2.3 TURBO AWD. MODDED FOR HILL CLIMB COMPETITION. ORIGINAL 3,000 KM'S ONLY (3,000 - NOT 30,000) MISHIMOTO INTAKE & INTERCOOLER PIPES K & N AIR FILTER IN MISHIMOTO AIR BOX. (COMES WITH MISHIMOTO INTERCOOLER - NOT FITTED) COBB CUSTOM TUNE & HAND HELD CONTROLLER. LED SHIFT LIGHT. "AUTO THROTTLE BLIP" FITTED FOR DOWN SHIFTS. X-FORCE TURBO BACK EXHAUST WITH REMOTE CONTROL REAR MUFFLER FLAP. 257 WHEEL KW'S. QUAIFE FRONT LSD (F
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
10
Roll Cage
2004 ST170 Ford Focus 6sp Manual Duratec ST 2.0ltr 170bhp stock engine Brad Stacey WA CAMS Registered 4pt Weld in cage. Vibratechnics Race Engine/Box Mounts Battery Relocate tray in cab fitted, Battery still under bonnet. Custom air intake. Timing Belt replaced Water Pump replaced Bespoked Engineering Billet Thermostat kit (not fitted) Raceworks 2ltr Catchcan with fittings (not fitted) + PCV Adaptor to suit engine. Cosworth Tuned Headers in heat wrap. MSD Coil & 8mm Leads Iridium Plugs Bonnet &
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing
13
Roll CageLog Book
FOR SALE NISSAN PULSAR SSS N15 SPEC APRA ️Ready to race ️Log booked ️AGI State Roll Cage ️6 Point enduro harness ️Fresh 7 inch lightweight race alloys ️Fresh blueprint SR20 engine ️Fresh locked gearbox ️Whiteline swaybar ️Side exhaust ️Yellowspeed spec coilovers ️Electric steering/water pump ️Passenger seat/ seat belt
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s
6
Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!
9
Log Book
Perfect base for IPRA build/24hr Lemons/ BEERS/ Cheap Car Challenge and similar budget enduro racing series SR20 and 5 speed, both in good condition Full service done including all fluids, filters and spark plugs Weld in Rod Kilby full cage with intrusion bars Kilby modified bride seat runners (driver and passenger) - allows for easy driver changes Race seat and 3 inch harness Brand new DBA rotors Brand new Winmax pads front and rear Brand new braided brake lines Brand new front camber pins Bra
6
Roll CageLog Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car
9
Roll Cage
Nissan Pulsar SSS N15 You're choice, repair or re-skin. From rear shunt body damage. IPRA 2L engine. Header large bore exhaust. Alloy radiator, Electric fan, cold air induction. Series yellow line Suspension adjustable, rear radius bar, quickshift. Full instrumentation including tacho with adjustable shift light. Water temp original plus extra gauge oil pressure. Cams accredited bolt in cage. remote mount battery. Power steering. DBA rotors, Winmax pads, vent to front brakes. Dual battery isolat