SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

22 items for sale

Refine Search

Clear All
Keyword
Category
8
6
1
5
1
4
1
Price
Minimum
Maximum
Listing Type

All Results

6
Roll Cage
Log Book
1968 Camaro - Built by Alston race cars in USA. Build no. 3040. Full steel bodied and bumpers with wind up windows Three quarter tubed chassis car Fibreglass bonnet and boot Ran with 522ci nitros motor with 400 shot. Ran a 7.84 over the quarter Always runs straight MSD grid 8 New MT 32" tyres As a roller with MSD (everything less motor and trans) $85,000 With turbo 400 rated at 2000hp and Al's glide air shifter with two neutrals $95,000 Can include complete Big Duke heads, 800hp nitros kit wi

Bathurst NSW, Australia
Share
Watch
2
This MX5 1998 NB race car with hard top has been expertly prepared and has been proven to be a trouble free, reliable and a consistant performer. There is no evidence of accident damage. The car weighs approx 1000 kg and produces 108 kw at the rear wheels. Modifications and equipment include: CAMS approved BROWN DAVIS roll bar. RACING BEAT cold air intake and RACING BEAT exhaust headers. RACING BEAT tubular front sway bar with adjustable end links and RACING BEAT reinforced sway bar mounts. WHI

Rowville VIC, Australia
Share
Watch
9
Was NZ$80,000NZ$70,000
Roll Cage
Log Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv

Dannevirke, New Zealand
Share
Watch
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.

Maitland NSW, Australia
Share
Watch
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s

Cranbourne VIC, Australia
Share
Watch
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t

Smithfield NSW, Australia
Share
Watch
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc

Tweed Heads South NSW, Australia
Share
Watch
10 1
Roll Cage
Log Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh

Harrington Park NSW, Australia
Share
Watch
4
Roll Cage
Log Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round

Knoxfield VIC, Australia
Share
Watch
13
Roll Cage
Log Book
For Sale – 2014 Lotus Exige V6 350S, highly modified. This was a no-expense-spared build using the best of the best and would make an amazing weekend cruiser, track day weapon or even Production Sports race car. Previously road registered with only 14,000 original road kms, and now with a conservative E85 Tune is running around 450hp, this V6 Exige will would destroy many cars 5 times the price. Well over $150,000 spent on modifications. Features of this car include • Freshly built forged engine

Taren Point NSW, Australia
Share
Watch
4
Roll Cage
Log Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin

Waiau Pa, New Zealand
Share
Watch
20
Roll Cage
Log Book
Clubman Locost (Lotus 7). Well known on Victorian Hillclimb circuit, Finishing top 10 in many events over 8 years current leader car to chase. 5 Victorian titles with this car. car is serviced after every round / oil change penrite racing 5 Specs - Well built Blacktop 4age wide rev range, great torque and kilowatts haltec 4 ls ignition coils Kelford cam's Teflon coated Hi comp Pistons Forged rods Ported head velocity stacks 100mm Chrome moly Flywheel Exedy Clutch and pressure plate T50 ge

Ballarat VIC, Australia
Share
Watch
4
This immaculate C6 corvette is race ready with no expense spared. Some features include the following: Coil over suspension QA1 suspension Front splitter Rear carbon fiber wing Upgraded brakes 6 piston front and 4 piston in the rear Auto blip computer Quick release steering wheel Roll Cage Fuel Cell Haltech dash with new wiring approx $10,000 Light weight racing battery Isolators Polycarbonate front windscreen Polycarbonate rear windscreen Car has been completely guttered only weighs 1,200 ki

Hampton VIC, Australia
Share
Watch
12
Roll Cage
Log Book
This is the only Lotus Exige Cup R (factory edition CUP car) in Australia, and the fastest Lotus around any race track in the country. Extensive modifications from the original Cup R spec include: Charge cooled 1900 Supercharger System Xtrac sequential gearbox using updated (2021) Motec controller (halved the shift times) Gearbox refresh completed early 2021 (valued over 10k) Complete engine build completed 05/2021 (valued over 30k) Highest spec AP racing discs and race pads Rebuilt Ohlin sho

Sydney NSW, Australia
Share
Watch
7
Roll Cage
Log Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s

Harrington Park NSW, Australia
Share
Watch
32 1
Roll Cage
General: Full chrome moly tube chassis by Chris Alston in California. Glass front, steel doors and rear. New Tailgate, body stripped and repainted in custom pearl blue. Custom wing, wheelie bars, parachute. 20l alloy fuel cell, new rear mounted battery. Linelock and quick release steering wheel, 5 point harness, alloy ice box. Completely rewired throughout. Certified by both NZDRA and IHRA. All fabrication done by Raceworks in 2021. Engine: 427 LS7 built by Steve Morris in USA in 2021, approx 10

Huntly, New Zealand
Share
Watch
6
Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!

Albury NSW, Australia
Share
Watch
6
Roll Cage
Log Book
New motor never been raced close ratio gear box with new clutch well engineered comes with 2 sets of rims 14" tidy car proven on track ex Gary Brown car and motor can be turned into a street car

Douglas Park NSW, Australia
Share
Watch
10
Roll Cage
Datsun 710 SSS 4 Door Rallycar 1975 Datsun 710 (Violet) Rallycar Genuine SSS 4 Door As seen running as official Car 00 at NSSCC Bay Stages last August and the most recent Whiteline Tarmac Rallysprint Stew Wilkins built L20 with twin 45 Webers & electronic dizzy - Bluebird?? 5 speed - R180 4.9:1 welded diff Alloy sump guard Light bar with period Cibie driving lights Adjustable coilover front struts Ex Datsun factory rally team De Carbon rear shocks Wheels on the car are Enkei road wheels with

Kings Langley NSW, Australia
Share
Watch
27
Roll Cage
Log Book
NSW and Australian Super sprint Championship winning vehicle, multiple times. Only selling due to moving interstate and downsizing property and ability to store and maintain multiple vehicles. Ok here we go. Bond Roll Bars weld in cage with roof cross bars, Carbon Fiber Hard Top, Garrett 2870 High Mount Turbo system with Haltech Engine management system, 165kws at the wheels on the Dyno at only 13 pounds Boost. Engine and Gearbox and clutch in great condition. Locked differential, New exhaust s

Brookvale NSW, Australia
Share
Watch