55 items for sale

Holden VZ SS Crewman L76 Gen 1V 6.0 Litre T56 6 Speed Manual 2006 Model Currently 520.8 RWHP ready for a retune to get the 650hp reliable its setup for if you wanted to. ENGINE WORK ProCharger D – 1SC Intercooled Centrifugal Supercharger Siemens / VDO 63lb per hour fuel injectors & custom fuel rail’s & fittings 044 fuel pump , surge tank & regulator , mounted underneath the car Pacemaker 4 into 1 ceramic coated extractors 2.5’ stainless steel twin system & high flow cats & dump tips Crow Cam 21

1969 For Capri Roller Drag Car / Burnout Car Can be Street Registered New Roll Cage to suit Drag Racing Chassis Connectors and Braced floor New Caltracs and rear springs fitted New Bilsten 90/10 struts and springs Narrowed 9inch diff Rear chassis notched and tubs fitted New (brakes) Willwood Disc and calipers fitted ($8000) worth After market larger transmission tunnel fitted Pro star rims 28x10.5x15 rear drag slicks Engine mounts and transmission cross member to suit Ford V8 fitted fi

1 Owner 49,**** Kms Race Red 6 Speed Manual Herrod Performance - Compliance Pack 670HP @ the Flywheel (minimum) Roush/Ford Racing R2300 2.3L TVS Supercharger Large Air-to-Water Intercooler System Oversized, Full-Face Low Temperature Heat Exchanger Degas Bottle High-Flow Rate Fuel Injectors Custom Aluminum Fuel Rail Formed Molded Hoses Twin 60mm Throttle Body with Matching Spacer Custom Cold Air Induction System Washable, High-Flow Dry Air Filter Heavy-Duty, First Sheave FEAD System Roush/Ford R

The GTR-X was a fascinating concept from the get-go; A fibreglass body, over a steel “ladder” chassis, which may seem exotic to an Australian market, but GM had been successfully using that technique with its iconic sports car, the Corvette, from 1953’s C1. Come 1969, the Corvette had evolved to the swoopy C3 guise, featuring independent suspension, four-wheel disc brakes and wild 427 L88 spec’ motors. Along that 16 year passage, the Corvette’s early mistakes became improvements and a smooth, fa

Mexican Road racer, originally constructed by Shelby de Mexico. Last raced Mexico 2019. New race prepped 289 with zero hours, Rotec 4 speed, 9" tru-track, custom extractors, fire protection, Custom Radiator, Bond Roll Cage Twin MSD and Coils, Hydraulic Hand Brake, Collapsible steering Colum with detachable steering wheel, window nets, race seats/harness's, Lexan side and rear windows, Bilstein shocks, long range fuel cell.

ESCORT Group 4 ex works Ford Australia car - INB 115 plate registered ex Colin Bond/Bob Riley/Greg Carr/Dick Johnson/Ian Hill/John Berne, one of 4 works detached cars built for the Australian Rally championship during 1976 - 1979 under contract to Colin Bond (Ford Australia) , also driven in select events ie Southern Cross International Rally , Alpine and Castrol International rallies. This car is original body shell and only one of two original cars remaining in existence. Safety equipment, eng

1980 vb sl/e commodore. 253 v8 automatic. Kept as original as possible. Always garaged barely driven. Has had brake system rebuilt and carby rebuilt a few years back. Has original purchase receipt also.

• Built from a very rust free CK44 rolling shell. Only rear wells and heater bubble replaced. Steel Mexico front wing flares added. • Bare metal shell repainted. • Rebuilt and upgraded 1600cc GT OHV engine built by Trevor Hines. • Significant number of new or NOS parts used including:- radiator, starter motor, alternator, head lining, 9” rear brakes, Mk2 front suspension, M16 calipers, all new bearings and bushes, tca’s, carpet, laminated windscreen, clutch, battery, new tyres. • Genuine UK made

First time offered for sale Bundaberg Rum's Ultimate Summer Wagon. Unwanted prize auctioned June 2003 with one lady owner to date. Genuine 25,000kms. One of three, 2 built for Mambo and one for Bundy Rum. Complied 7/02. VU, SS, Panel van. Black metallic paint, manual, 5.7L, V8, Petrol, EFI. Aircon, dual airbags, P/steer, P/wind front, ABS, IRS, LSD, FE2 suspension, Cruise control, Central locking, Pioneer head unit CD/DVD Player with subwoofers, Red leather trim, SS cold air induction kit, High

Torana Hatchback SL Hatchback project ready to get started! It has just returned from the sand blasters and is ready to start metal and body work. This car is a honest car and presents well without hiding any unknown gremlins. It is definitely the straightest Hatch I have ever seen and before body work has been completed. Has all three tags and matching chassis number. It has rust in the normal areas and I have a number of rust panels to go with the car. It is a genuine 77 LX sl Torana untou

Great car that has had hundreds of hours put into it over 15 years making it a competitive club car, with extensive work done to suspension, brakes, engine, etc, it has won its class at several hillclimbs. The 351 cleveland has done les than 10,000kms and has all quality components and has been built to last with,forged pistons and rods, sleeved lifter bores for the solid roller cam , 10 litres of oil capacity with high energy sump and an accusump, amongst other modifications. Most suspension

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun

FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL

Immaculate 1961 Ford Anglia 105E Ford Bionic Blue No rust, perfect car. Personalised Plate 1600 Ford Cortina Crossflow Engine with Cam Extractors to 2" Exhaust System Weber Dual Throat Downdraft Carburettor Lotus Elan 2000E 4 speed Gearbox Ford Cortina Disc Front Brakes Brand new rear Drum Brakes All new interior Seats and Panels 3.77 Rear Diff ideal for Highways MacPherson Front Suspension New Gabriel Ultra Rear Suspension Dragway Magnesium Wheels 13" X 6" Kumho Radials 185/65/13 The car is

Holden Commodore 2017 Series 2 VF SSV Redline 6.2 litre V8, under 20,000klms Son of a gun grey, 20” rims, tow bar, engine cover, back spoiler, window shields, bonnet protector, light protectors all round, insect grill, black inserts on exterior ventilation points, window tinting and more. Only genuine inquiries please 0403 648 220 $76,500 but will consider genuine offers

A Historically Significant Survivor a Holden Torana GMP&A Factory built A9X Hatchback Road car specialty built for HDT mechanic and Race team driver Wayne Negus as his own Personal Family car.This is the only A9X GMP&A Hatchback to be built in this specification and color, Confirmed by Mike Prowse the Production control Supervisor at GMH in AMC mag issue 35, as this car is definitely a 1 of 1 build from GMH AND CERTAINLY THE RAREST WITH SUCH AN INTERESTING HISTORY AND PROVENANCE. Wayne spent a f

Here we go, was original 2001 HSV VX GTS300, build number 044 and I started doing some track days and then lots of track days and then NZ Superlaps and now I have a full-fledged race car with rego EDE220 on hold. Engine is an L98 that has been bored and stroked 408CI and delivering 572 RWHP. All engine build sheet and dyno sheet are included in the pics, has Castle headers with 2" primaries into 3.5" MRX side exhaust, inlet is FAST with 102mm throttle body. This is coupled to a 6 speed TTI tra

Hi all, this is my 2016 for mustang gt supercharged no money has been spared with this beast, this car has been a weekend car and garaged all the time and has 34 000kms. This car is more of a weekend car for me also still has almost a years rego, car is making around 450kw at the rears capable of much more. By intune motorsports. Car is running on pump 98. Mod list Harrop TVS 2300 supercharcher kit with all running gear. mantic twin plate clutch (comfortable for everyday usage) Custom ex