92 items in Australia with Roll Cage for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
10
Roll Cage
2004 ST170 Ford Focus 6sp Manual Duratec ST 2.0ltr 170bhp stock engine Brad Stacey WA CAMS Registered 4pt Weld in cage. Vibratechnics Race Engine/Box Mounts Battery Relocate tray in cab fitted, Battery still under bonnet. Custom air intake. Timing Belt replaced Water Pump replaced Bespoked Engineering Billet Thermostat kit (not fitted) Raceworks 2ltr Catchcan with fittings (not fitted) + PCV Adaptor to suit engine. Cosworth Tuned Headers in heat wrap. MSD Coil & 8mm Leads Iridium Plugs Bonnet &
3
Roll CageLog Book
2004 VY SV8 Log booked 3J Improved Production 5.7 rebuilt less than 20 meetings ago (only averaged 2-3 meetings per year) Heads redone 6 meetings ago Fuel cell with external fuel pumps 1 set spare rims and AO50s 1 set of spare front quarter panels Consistent 65’s at Waneroo with good rubber, very reliable car Can send more photos and video required
20 1
Roll CageLog Book
For sale is my logbooked CSV Mondo GT mock up (Holden Monaro) 3E Production car - Homologation document 3-16-001. Also suitable for 3J Improved Production IPRA as logbooked naturally aspirated 3E cars are eligible as is. This car previously competed in multiple Bathurst 6 Hours which is why I bought it, only for it to be taken off the eligibility list a few months later, hence why I am selling it. Can be converted to HSV GTO which is still eligible. Car is extremely well built and features an
17
Roll Cage
Caged to CAMS rally spec 2ltr Zetec 200hp piper cams Jenvey fuel injection Emerald ECU PWR radiator 2x gearboxes. 1 x T9 5 speed( new ) and T3 4 speed Wilwood front brakes Compression struts Atlas diff 2 link plus panhard rod GAZ shocks Capri front struts AVO steering wheel All instrument fiber glass dash 4 Rebel wheel and 4 Hustler wheels RS200 decal kit and badges Just about everything needed
6
Roll Cage
Holden Monaro CV8 Rolling Shell Car has been caged for many years and after talking to officials doesn't need much to be compliant with current times. Bought it with the vision to build but unfortunately this has come to plans.
12
Roll CageLog Book
Mk2 Ford Escort 2lt, log booked, worked 2ltr pinto, forged ceramic top pistons, cosworth rods, twin 45 Webber's and much more, for full details contact Steve.
9 1
Roll CageLog Book
Motor Sport Australia (CAMS) Log booked since 2002 Group Nc Triumph MKII 2.5 PI. Full 'ready to race package' Race car, Custom built Trailer, Spares, Tools, Alternate ratio Gear boxes and Diffs. Replicates the 1970 Bathurst Brian Culcheth entry and the same model that finished 2nd (Culcheth & Johnstone) and 4th in the 1970 London to Mexico world rally. Recent results: All Triumph Challenge 2019, 3rd, 1st, 2nd, of 3 events. Beating well developed TR6's and V8 powered TR7's Phillip Island Cla
9
Roll CageLog Book
Motorsport Australia Historic log booked group N Mach 1 Mustang Rotisserie restoration taken back to metal, retaining its original exterior paintwork, not a showpony but presents very well. All new mechanicals inc Dry sump Dart based 351 Windsor forged internals RHS heads built by Kanaris Engines 600+ HP, Haltech ECU, New TKX close ratio, 9” 3.89 Trutrack, 4 link rear end on fully adjustable coil overs all round. Motorsport hubs front on 2-peice hub and rotors, tubular upper and lower wishbones
10 1
Roll Cage
Tas sports gtb circuit races car. Run in past 3 seasons of the tas circuit racing championship. Won lots of races. Very quick. Atomic gta550 engine detuned to 13psi making 408rwkw. Was on 15psi and 440rwkw. Adjustable everything. Brembo brakes. Replacement panels. 6 speed manual. 3 sets of wheels. 58 sec Baskerville, 59 sec symmons plains. Fun car to drive.
6
Roll Cage
Mexican Road racer, originally constructed by Shelby de Mexico. Last raced Mexico 2019. New race prepped 289 with zero hours, Rotec 4 speed, 9" tru-track, custom extractors, fire protection, Custom Radiator, Bond Roll Cage Twin MSD and Coils, Hydraulic Hand Brake, Collapsible steering Colum with detachable steering wheel, window nets, race seats/harness's, Lexan side and rear windows, Bilstein shocks, long range fuel cell.
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing
16
Roll CageLog Book
Team Dynamic VY Commodore Chassis #001, driven by Jason Richards. Recently restored. Fresh Engine 0km Fresh Ohlins Shocks 0KM Professionally prepared, turn Key and ready for Kumho V8 Series, currently presented in 2003 Richards #45 livery, a very clean and well presented car. Spares package included.
10
Roll CageLog Book
Cams log booked ford fiesta 2006 ford fiesta 1.6lt Omex 600 ECU Jenvey throttle bodies Short ratio IB5 gear box with LSD TVV Racing flywheel TVV 3 piece ceramic clutch with lighten race, pressure plate DGR coil overs Newman race cams Wossner pistons Pec rods ARP studs Cobra seat Saas steering wheel Short shifter Engine does need Attention but is still running.
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S
18
Roll CageLog Book
FOR SALE V8 5ltr 304 stroker engine with 650 double pumper Holley carburettor Pacemaker headers with side pipes Strut brace Power steering cooler 9.5lt winged sump 6 speed Tremec gearbox 10 bolt LSD Bilstein shocks all around Fully seam welded Near new Wilwood front callipers, VL callipers on rear 6 point welded cage Wired to rally safe standards 80 litre fuel cell 6 point harness 17 x 8, 17 x 10 custom Simmons Velo seat Log booked for both CAMS & AMSAG Presents very well for the money. Jump i
10
Roll Cage
Time to get serious the GOOD XY Falcon GT replica, (XY Fairmont body) built to Nc Historic touring car standards from the ground up, (bare metal no bog) never raced yet, plenty of good gear, full welded roll cage, whatt's linkage rear end, brand new built engine from the ground up, new absolute everything including block, 4V closed chamber ported heads, matched port Custom made inlet manifold, roller rockers, roller cam/lifters, new alloy top loader gearbox, 31 spline rear axles, full spool 9"
10
Roll CageLog Book
64 1/2 Ford Mustang historic touring car. Raced by Harry Bargwanna Well sorted and successful front running race car. Newly built 289 motor ( not raced ). Boss block, RHS heads, New Callies steel crank. Top loader gearbox. 9 inch diff with spool. Floated rear end. Spares. 12 wheels, top loader gearbox , 3.55 9 inch diff, distributor, starter motor, front calipers, front discs , front stub axles. Car located Engadine NSW.
20
Roll CageLog Book
Holden lj torana historic touring car , 295 hp 202 roller cam engine full girdle bottom end blue motor crank matched ported intake and exhaust triple 45 dcoe webers electronic ignition , centre throw hydraulic clutch , L34 ratio gearbox spare m21 gearbox , diff full spool 3.08 3.36 3.55 strengthened main caps 28 spline axles adjustable pedal box BMW vented front discs Volvo 4 spots , large adjustable koni shocks king springs, 2 sets 13x7 hot wires plus 1 set 13x6 hot wire with wets
4
Roll CageLog Book
The car was built by Paul Morris Motorsport, chassis No. ‘Kulwicki’ for the 2009 Championship Series, driven by Russell Ingall in Supercheap Auto livery. Please contact us for pricing and more information.