155 items for sale

Open to genuine offer 1500hp Project ford falcon xy 461 Windsor full restoration f2 pro charger custom everything this car owes me well over $300,000 everything is there to finish all that needs to be done is put back together Custom radiator with 2 16inch spal fans Dart block 9.5 4bolt mains Callie’s crank and rods,diamond pistons Victor Chapman sr heads ported And intake Custom cam F2 pro charger 3000hp w/a intercooler Fueltec ft600 Turbo 400 als race glides with Neil chance r

Expressions of interest ... After much deliberating, I’ve decided to sell my “ Group C “ RX7 This is the real deal and comes with some incredible documented history inc - First time on the market in over 30 Yrs - One of approx 25 “SE” RX7’s bought into the country by Mazda - One of the first RX7’s to race in the 1979 Bathurst Hardie-Ferodo 1000 - Competed in the 80 & 81 Bathurst race as well - One of the very first RX7’s that Mofatt actually raced ( Oran Pk ) 4/5/1980 - Cams log book inc

33-34 Ford Pick-up all Henry steel, 4 bar, disc brake dropped axle front, 350 Chev Vortec, TKO600 Tremic 5 speed, Currie 9" diff with Positrac, air conditioning, new distressed look trim, new headlining. Tough little truck. Can come with saltlakes, or original style wires. $105,000 negotiable. plates not transferable, selling without rego.

This 650S GT3 was delivered new by McLaren GT in December 2016. New engine installed in May 2018, has less than 1300 kms. New gearbox installed in January 2018, has less than 3,300 km. All MGT upgrades for the 650S GT3 included in this car. Maintenance, lifing records, mileage, other documentation and vehicle viewing all available upon request. Last raced Phillip Island in 2018 and has since been privately owned with minimal private track day usage. Vehicle maintained by McElrea Racing

worked 351 cleveland, ported heads, edelbrock manifold, holley carb, solid flat tappet cam, roller rockers, msd ignition, balanced and blueprinted bottom end. top loader, shortened nine inch disc brake with strange axles, alloy performance radiator. This is a really fun car to drive, lots of power and sounds tough! This is a great start to a resto or custom build, nice straight almost rust free body with a tough driveline and a mint interior. either drive as is or fix a couple minor dints and r

Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L

Aussie Racing Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purpose built tilt trailer with winch. Sydney NSW Log book $16K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185

Mazda RX8 SP Tribute Tarmac Rally Car This car was built to take on Targa Tasmania in the Early Modern Category. Since then the car has been used in the Australian Tarmac Rallies, taking out the Championship in 2023 Early Modern. This car is so well setup it is easy to drive with constant power and no turbo lag. https://youtu.be/q99dUqYGv2E?si=7NuChYIdCvaxCnRx 13B REW Borg Warner EFR 83/74 with .92 Series 2 6 speed gearbox OMP Winged Seats 2 x 6 Point Harnesses 2 Stage Heated Front Windscreen

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

Ford GT40 Twin Turbo 5.0L Windsor (Built Engine) 6-speed Manual, Halibrand Wheels, Liquid Silver with Jet Black stripes This car is an absolute beast of a car, beautifully presented and built with full attention to detail, no expense spared with recent works done including the following :- Fully rebuilt suspension, engine, transaxle, wheels just months ago and has traveled just over 1,500klms since The engine is a twin turbo charged 5.0L Windsor with custom intake, Roush Worlds Heads, Competit

IT ACTUALLY PAINS ME TO TYPE THIS Roller- MR ROTA NO ENGINE( everything that is bolted to it stays on engine, including headers , fuel reg, injectors, remote oil filter housing) ,CLUTCH,BOX - everything else stays . I have stolen tail light assemblies for new car but ill find some more from somewhere that will be in mint condition alloy radiator , spal thermo, electric water pump custom chromolly front crossmemer custom 10l fuel tank in engine bay with holley fuel pump microtech LT16 ,7 inc

Classic Mazda Rotary Rally Car. Spent nearly all of its life in a shed, has never needed rust repairs. Strong Mazda 12a 6port rotary motor, 4 speed, RX4 Manual Gearbox. Starts, Runs and drives as it should. Pops flames, bangs and crackles on trailing throttle. New Mazda LSD with 4.4 gears in a RX3 diff housing. Engineers Certificate, and Cams Logbook. Was on full Vic Reg, now on Club Plates. Never been a rust bucket but has been on a few Rallies. Check out the Photos as from part of the descrip

LSTV 8 ONE OFF FORD FGX XR8 Built September 2015 -1 of only 98 built “Smoke” 6 speed manuals. -Fitted with FORD PERFOMANCE ALUMINATOR SUPERCHARGED 5.0 LITRE CRATE ENGINE (Engine Number Stamped to match Original Build number and Vic Roads) (Original block/motor available as part of sale. Motor is stripped down and would need some work before re-assemble) - 457 KW (615 HP at rear wheels) 743 nm torque (35% more than limited edition “sprint” series) -9:5:1 Mahle forged low compression pistons

FORD ESCORT MK2 GROUP 4: MOTOR:completly rebuilt all new * 2 Liter Pinto * Rebored with new forged 92mm piston * New Burton Rods with ARP Bolts * Reground balanced crank * Head rebuilt with 48mm inlet & 38 exhaust valves * Light weight English Rockers * Light weight fly wheel with twin plate clutch * Twin 45's with new kits throughout * New oil pump * New alloy sump & pickup too much to list SUSPENSION: * Billsteins all-round GEARBOX: 0-km * Sierra 5 speed with close ratio straigh

Near completed rolling shell Ford XR8 Replica tourer. National spec cage with MA certification. Period correct full containment newly covered recaro seat. Supercar body kit and lexan windows. XYZ coilovers all round. Rear bulkhead completed, fresh 2k paint job and fully painted interior nardo grey 2k paint. Custom seat mounts. Lightened doors and new door cards. 6 pot mustang brembo front calipers, XR8 rear calipers. Genuine XR8. Brand new DBA 4000 t3 front rotors. Strengthened rear di

New Coyote 5.0L engine - 2 race meetings old Gearbox Reconditioned Light-weight / quick release boot lid Carbon roof turret Full function display Spark steering wheel Solid prop Shaft w/sleeved journals FIA onboard efficiency Cooling System PWR Hi Efficiency Cooling System Motec M150 ECU with 250 mb logging Ramp and Clutch type Limited Slip Differential (LSD) TIlton 3-Plate Sintered Clutch, Master Cylinder's and Pedal Box GPS vehicle speed system 9 Position Throttle mapping Pit Lane Speed Limi

1982 Ford Falcon Dick Johnson Redroo Tribute car currently racing in Touring Car Masters in New Zealand .number 117 I’ve owned this car for 16 years and raced it on every race track in New Zealand and raced at Sydney Motorsport Park, Bathurst 1000 Twice , Bathurst International once and Adelaide 500 once all with Touring Car Masters Australia. Development the car over the years to a fun reliable Muscle Car . Numerous trophies gathered over the years .The car has fully homologated Motorsport NZ