112 items for sale

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

Aussie Race Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purposes built tilt trailer with winch. Sydney NSW Log book $18K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185

Race Car Transporter - 45 foot - Fully fitted out - Fits 2 cars. Electric Hydraulic Tailgate (refurbished) - lift up to 2 ton. Honda Generator, Air Compressor, 240 volt lighting and power plugs. Large Fridge Freezer. Stainless Benches and 6 Large Lockable Tool boxes. 20 ton Press. Cabinets and Wheel storage. Battery Charger and internal lighting. LED Lights, new tyres and service. Just had roadworthy and Registration. Australia wide delivery available. Located in Melbourne, heading to Perth next

No expense spared build with only 19,000km Build cost of over 150k, this car is a cheap way to get in a properly built car with all the safety gear. Please call for a full run down on the vehicle. Modification / build specs Full weld in Cams approved Tarmac Rally cage. This is built to the absolute highest spec and vehicle was fully stripped to fit. Properly painted and prepped. All sound deadening etc removed. Syvecs stand alone ECU. Full factory function with infinite adjustability.

Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford

Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams

Genuine Group A Ford Mustang (Fox Body). Ex Kevin Clark. Ready for restoration. Could also be restored to 1989 Historic Sports Sedan as it has both log books from the period. Shell and roll cage is freshly painted in light blue (Group A colour) ready for assembly. Comes with virgin 302 long engine with correct inlet manifold and heads. New pistons, crank, rods, rings and bearings ready for assembly. 8 1/2" Mustang diff installed along with some suspension. AP 6 pot brake rotors. New set of alloy

FORD FOCUS RS AWD LE Purchased new 2018 - 1 owner. 2018 FORD FOCUS RS LE 2.3 TURBO AWD. MODDED FOR HILL CLIMB COMPETITION. ORIGINAL 3,000 KM'S ONLY (3,000 - NOT 30,000) MISHIMOTO INTAKE & INTERCOOLER PIPES K & N AIR FILTER IN MISHIMOTO AIR BOX. (COMES WITH MISHIMOTO INTERCOOLER - NOT FITTED) COBB CUSTOM TUNE & HAND HELD CONTROLLER. LED SHIFT LIGHT. "AUTO THROTTLE BLIP" FITTED FOR DOWN SHIFTS. X-FORCE TURBO BACK EXHAUST WITH REMOTE CONTROL REAR MUFFLER FLAP. 257 WHEEL KW'S. QUAIFE FRONT LSD (F

400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

2005 ba falcon xr8 Car has following: Motorsport Australia logbook 3j improved production -fresh 5.4ltr engine with only dyno time -T56 6 speed gearbox with new ceramic clutch and lighten flywheel -4 into 1 pacemaker headers with 4 inch side exit exhaust -brembo 4 pot front brakes with pbr rear -HSD coilovers allround -Adjustable sway bars front and rear New Nolathane bushes in rear cradle with adjustable control arms -Front camber kit -2 sets of Koya SF05 wheels 18X9 front 18X10 rear with slic

Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Caged to CAMS rally spec 2ltr Zetec 200hp piper cams Jenvey fuel injection Emerald ECU PWR radiator 2x gearboxes. 1 x T9 5 speed( new ) and T3 4 speed Wilwood front brakes Compression struts Atlas diff 2 link plus panhard rod GAZ shocks Capri front struts AVO steering wheel All instrument fiber glass dash 4 Rebel wheel and 4 Hustler wheels RS200 decal kit and badges Just about everything needed