24 Motorsport Vehicles for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
4
One owner deceased estate. Logged as Sport sedan since 1972. Body is extremely stripped out. Bond alloy cage. 2ltr Pinto turbo with forged pistons, h beam rods, Holley 4bbl, balanced, dry sump, etc. Engine fully rebuilt 2020. Done 3 vsccwa shows since. 5 speed Celica. Full suspension mods, brakes all rebuilt. New h/d alloy radiator and intercooler. Foam filled alloy fuel tank. 4 - 13"x7" alloy wheels with almost new dot race tyres. 4- 13"x9" alloy wheels,2 with new slicks. 4- 13"x10" alloy wheel
3
Roll CageLog Book
Escort Mk1 Targa rally car. Car has completed 6 Targa events to 2010. Has not been driven since. 2lt. pinto motor with Webers and all the good forged race internals professionally built engine. Dynoed at 180 h/p. Also have a spare 2 door shell in excellent condition on spit roast Ready to build a new project car (extra cost, not included in car price) no rego, no RWC.
20 1
Roll Cage
1040kg. @555rwhp at 18 psi This is your opportunity to buy a very well sorted Unique Time Attack package. -Recent refresh all brake calipers, brake master, new clutch slave and clutch master. -New windscreen. -All Carbon body repaired and coated in 2 pack clear. -Roof and rear bar new Matt black Avery wrap. -Microtech LT16 modified for flat shifting. -Motec CDL3 data logging dash -Lots of sensors -Oil pressure/temp -Fuel pressure -Water temp -Air intake -Afr -Seperate egts microte
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
14 1
Roll CageLog Book
Mazda RX8 SP Tribute Tarmac Rally Car This car was built to take on Targa Tasmania in the Early Modern Category. Since then the car has been used in the Australian Tarmac Rallies, taking out the Championship in 2023 Early Modern. This car is so well setup it is easy to drive with constant power and no turbo lag. https://youtu.be/q99dUqYGv2E?si=7NuChYIdCvaxCnRx 13B REW Borg Warner EFR 83/74 with .92 Series 2 6 speed gearbox OMP Winged Seats 2 x 6 Point Harnesses 2 Stage Heated Front Windscreen
6
Roll CageLog Book
Genuine RX-2 Body Shell Group Nc Historic Touring Car 12A Bridgeport, 51mm IDA Weber, Lightened Rotating Assembly 4 Speed 4.7 Locked Diff Volvo 4 Spot Front Brakes Koni Shocks Front and Rear Steel Roll Cage Log Booked 13 x 7 Hotwire Wheels Recently Retrimmed front Race Seats Raced at Morgan Park Raceway and Leyburn Sprints by Bob Heagerty Fun Little Mid Field Race Car
2
This MX5 1998 NB race car with hard top has been expertly prepared and has been proven to be a trouble free, reliable and a consistant performer. There is no evidence of accident damage. The car weighs approx 1000 kg and produces 108 kw at the rear wheels. Modifications and equipment include: CAMS approved BROWN DAVIS roll bar. RACING BEAT cold air intake and RACING BEAT exhaust headers. RACING BEAT tubular front sway bar with adjustable end links and RACING BEAT reinforced sway bar mounts. WHI
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
3 1
Roll CageLog Book
Improved Production RX3. 13B O'Dell Fontana bridge port. Laird manifold. Motec. Aim dash with full logging. 5 speed dog box. Hilux rear end, floating axles, cambered. MCA 3 way adjustable gold shocks. Spare set of wheels, flares, spoilers and moulds. Wilwood brakes.
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
9 1
Roll CageLog Book
Genuine Australian delivered 12A RX3 Coupe. True to it’s original log-book from 1991 the car still runs period correct 12APP, extended fuel-bowl Weber and has an early LSD and Needham close ratio box with 6-point bolt in cage. Lots more pics here https://www.dropbox.com/scl/fo/in3bfqwjsf82gsbn3cn1b/h?rlkey=ti3snaesjilgakocndpv7q2j7&st=i3k76t7r&dl=0 Plenty of mechanical upgrades since this car was pulled from a shed where it had sat for over 13 years. This is an Australian delivered 12AP coupe
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
7
Roll CageLog Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car
9
Roll CageLog Book
Selling my 1979 Mazda RX7 Targa / Rally car. This car has been used in Targa Competition, but hasn't been used much over the last few years as I have acquired a new car. Modifications are as follows: 13B pp engine IDA51 Carburettor Bilstein adjustable shocks Toyota hilux diff and axles with a 5.3 final drive Full steel roll cage Race seats and 5 point harnessess Series 6 mazda 4 pot brake on the front Series 6 mazda brakes on the rear Hollinger 6 speed H-pattern gearbox - serviced 600kms ago B
23
Fresh built mazsport short shaft 20bpp never started, hgt 5 speed gearbox with twin plate clutch. Triple throttle bodies with manifold flanges and exhaust flanges included. The car has been fitted with an comprehensive cage bent up by Bonds roll cages and fitted by a qualified welder. Full hardrace suspension control rods including upper and lower control arms. Ap front brakes brand new and evo 10 rear. Two sets of 18×8.5+37 wheels one with khumo semi slicks. Other items included in the sale.
6
Roll CageLog Book
Ford Escort Mk 1 Built to win Historic Group Nc here in Australia. BDA 1600cc has done dyno running only 231hp @ 9350rpm 143 lb-ft @ 7500rpm AP alluminium twin plate clutch Magnesium gearbox casing Gearbox upgraded with racing steel syncros and racing gear set Koni double adjustable rear dampers Australian Historic Group Nc log book Comes with basically every conceivable diff ratio as spares and a few other random spares I have. Only really ran one time in anger, where it ran at Phillip Isla
9
Roll Cage
Mazda RX7 Series 5 FC 1991 Race Car. 13B Bridge Port Turbo ( built by South Coast Rotary) . 2 way LSD , GT 35R Garret Turbo , Microtec ECU , New Exeedy carbon twin plate clutch.2 sets of wheels. Rear wing, New fiberglass front splitter. Inter cooler and radiator as per pictures , OMP seat, New adjustable racing suspension. New rotors and pads . Heaps of spares. Available as a roller ( less engine) for $18,000 . Would make great drift car. Car is located in Kempsey NSW,
7
Roll CageLog Book
The ex Grand Prix Mazda/Murray Coote Group C Touring Car and Group A Rally Car. Raced in the QTCC and some ATCC races 1982-1984 winning the Under 2L class of the QTCC in 1983, in 1985 it was converted to a Group A rally car, winning the Queensland Rally Championship that year, and the QLD round of the Australian Rally Championship. 1982 Mazda 323SS (not Familia) with twin carbs, 5 speed, pedal box, healthy refreshed/dynoed engine. Part converted back to Group C specification, requires some bo
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando
7
Roll CageLog Book
Mazda RX7 Sports Sedan. Ex Ivan Mikac Go-Gear built car. Ground up restoration 2018-2020 including chassis/body, transaxle and engine. 2021 Tasmanian State Champioship winner. 12a turbo, Hewland FGB with long and short track ratios, spare set of wheels with slicks. Short and tall drivers seats. Can assist with transport if required. May consider sports sedan project as part payment.