30 items for sale

Holden Astra SRI Turbo, set up for track days, Slotted front rotors, Ceramic front & rear disc pads, Sparco race seat (not fitted), Momo steering wheel, Racegear harness, Spare brake pads and wheels & tyres. With a couple of week ends work and very little cost you can be racing in Track days, Tampered race days, Regularity races, 6 Hour relays, Budget enduros etc. (Trailer not included)

1040kg. @555rwhp at 18 psi This is your opportunity to buy a very well sorted Unique Time Attack package. -Recent refresh all brake calipers, brake master, new clutch slave and clutch master. -New windscreen. -All Carbon body repaired and coated in 2 pack clear. -Roof and rear bar new Matt black Avery wrap. -Microtech LT16 modified for flat shifting. -Motec CDL3 data logging dash -Lots of sensors -Oil pressure/temp -Fuel pressure -Water temp -Air intake -Afr -Seperate egts microte

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

This very special original Chassis no GSM 009 Kmart VT Commodore car built by Gibson Motorsport. This was the last built Gibson commodore v8 supercar formerly raced by four time Bathurst 1000 winner Greg Murphy. Debuted by the Kmart branded Gibson Motor sport team at Calder in 2000 shell championship, This car was initially driven by Greg Murphy. It became the Murphy / Steven Richards car for the Queensland and Bathurst endurance races. Scoring podium finishes on both occasions finishing 3rd. Th

Expressions of interest ... After much deliberating, I’ve decided to sell my “ Group C “ RX7 This is the real deal and comes with some incredible documented history inc - First time on the market in over 30 Yrs - One of approx 25 “SE” RX7’s bought into the country by Mazda - One of the first RX7’s to race in the 1979 Bathurst Hardie-Ferodo 1000 - Competed in the 80 & 81 Bathurst race as well - One of the very first RX7’s that Mofatt actually raced ( Oran Pk ) 4/5/1980 - Cams log book inc

*ARRIVE & DRIVE AVAILABLE - REMAINING 2024 & 2025 SEASONS* We have an arrive and drive package available for the remainder of the 2024 V8 SuperUte Season and we are also taking inquiries for the 2025 V8 SuperUte Season. This package includes full trackside support from Apogee Motorsport, based in Lonsdale, South Australia. The package includes everything that you need to go racing with the exception of damage and the driver's flights and accommodation. Remaining Events 2024: Oct 10th to 14

Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L

Classic Mazda Rotary Rally Car. Spent nearly all of its life in a shed, has never needed rust repairs. Strong Mazda 12a 6port rotary motor, 4 speed, RX4 Manual Gearbox. Starts, Runs and drives as it should. Pops flames, bangs and crackles on trailing throttle. New Mazda LSD with 4.4 gears in a RX3 diff housing. Engineers Certificate, and Cams Logbook. Was on full Vic Reg, now on Club Plates. Never been a rust bucket but has been on a few Rallies. Check out the Photos as from part of the descrip

- project roller - fabricated 9 inch rear end -4 link anti roll bar -chrome moly funny car style cage -Viking coil overs all round - weld single bead lock 15x12 - mt 29.5-10 rears new - weld alumastar front runners - alloy fuel cell & triple pump set up -fibre glass bonnet and street bonnet -Vx Calais body kit Contact Rob 0417 881 260 Can assist with transport to Melbourne and Sydney

Perkins Engineering VT036 silver bullet 2000 Russell Ingall car Refurbished in 2016 Run at festival of Motorsports Adelaide 2017, log books x3 from 2000 up to date has not been used since 2017

Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.

Professionally New Built Can be registered Willwoods Brakes All Round Build for 1,500 HP Call 0413 878 516 $40,000

2003 Holden Monaro CV8 series2 Circuit Racing No expense spared Professionally prepared, turn key & Ready Experience the excitement of the track with this exceptional car and enjoy track life LS 6LTR Engine (25hrs only) Curl Over-race springs, adjustable suspension. Bembro brakes, 6 piston front& 4 piston rear. Motec PDM Motec digital Dash 2 Battery isolation switches Cobra seat RPM Harness Roll Cage Diffs true track 3-5 Ratio Race tyres.

Team Dynamic VY Commodore Chassis #001, driven by Jason Richards. Recently restored. Fresh Engine 0km Fresh Ohlins Shocks 0KM Professionally prepared, turn Key and ready for Kumho V8 Series, currently presented in 2003 Richards #45 livery, a very clean and well presented car. Spares package included.

**PRICE DROP** 2004 Holden VY Ute Drag Car 468 BB CHEV (selling turn key) Monaro front clip, Steel shell & Alfa glass panels. 9 inch rear with 455 nodular 35 spline spool & Mark Williams axles. Macdonald Bros 4 link rear end with sway bar & strange shockers. Light weight K frame with new struts & Wilwood front brakes and master. Advanced headers customs pipes, BG fuel pump, alloy radiator, MSD power grid ignition. 15x14 Weld racing rears & 15x3 front runners. Weighs 2590 lbs without driver.