74 items with Roll Cage for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
4
Roll CageLog Book
3K Saloon Car, Ex Grant Johnson, 3 times National Champion and 7 times WA State Champion. Package includes Racecar, Trailer with tyre rack and toolbox and negotiable spares.
9
Roll CageLog Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
27
Roll CageLog Book
2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu
14
Roll CageLog Book
On offer for sale is this 2000 Holden Commodore Team Brock Future Tourer raced by James Brock in the 2000/2001 BOC Gases Australian Super Touring Championship. Originally built by Brock under the Diamond Valley Speed Shop banner after Brock had claimed victory in the inaugural category race at Mount Panorama in 1999 with a VS Commodore, this VT Commodore made its racing debut at Oran Park in July 2000 and competed in Brock Jnr’s hands with backing of V8 Sleuth partner Biante Model Cars. The ca
26
Roll Cage
- project roller - fabricated 9 inch rear end -4 link anti roll bar -chrome moly funny car style cage -Viking coil overs all round - weld single bead lock 15x12 - mt 29.5-10 rears new - weld alumastar front runners - alloy fuel cell & triple pump set up -fibre glass bonnet and street bonnet -Vx Calais body kit Contact Rob 0417 881 260 Can assist with transport to Melbourne and Sydney
42
Roll Cage
Overview: • This Chevrolet Camaro has been with its current owner for almost a decade after acquiring it from Tennessee and shipping the car to Australia • Under its previous ownership in the USA, the car ran in the Sports Car Club of America GT1 and GT2 classes • It sports a new AR Bodies muscle car shell on a Panoz chassis that was assembled by Penske Racing to an incredibly high standard • Under the bonnet sits a Chevrolet LS1 engine putting down 400hp to the rear wheels • The Camaro has bee
15 1
Roll CageLog Book
This incredibly special Holden Ute was built for James Brock and was produced by Wayne Park in Queensland who was the original builder of all the V8 Brutes. James Brock first competed in round three of the 2003 V8 Ute Championship at Wakefield Park and went on to finish 3rd in the Championship that year along with numerous pole positions and lap records. In the same year James and father Peter Brock drove the car together and won the “Great Aussie Ute Race” which was held at the Bathurst 24 Hou
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
4
Roll CageLog Book
2020 Spectrum 015 raced and well maintained for the last 2 seasons by Altatek Racing, this car is be ready to go for anybody looking for a great car for multiple seasons in Australia's best development category. Vehicle comes with a colour Motec C125 dash, freshly serviced and rebuilt Spectrum Penske shocks, 2 sets of wheel rims, ratios for all Victorian and Australian Formula Ford Series tracks, a spare nosecone and various other spares. Vehicle last competed full time in the 2023 Victorian Fo
27
Roll CageLog Book
Perkins Engineering VT036 silver bullet 2000 Russell Ingall car Refurbished in 2016 Run at festival of Motorsports Adelaide 2017, log books x3 from 2000 up to date has not been used since 2017
3
Roll Cage
VE Targa Car Supercharged LS3 Jerico 5 speed Gear Box Ford Floater 9” Diff AP Brakes Motec Dash. Intercom.
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
8
Roll CageLog Book
Astra CDTi production car, Holden factory race car built by PMM for the 2007 Bathurst 12 hour sponsored by Bendon, built to showcase the power of the new diesel Astra. Also competed in the 2009 12 hour for the Holdsworth family, did some production racing for a few years after but more recently just used as a fun track car. Very well built, 6 speed, DMS suspension, Racetech seat, Performance Box with power and external antenna, we use ex Toyota 86 semi slicks for very cheap fun. Would need harne
12
Roll CageLog Book
IPRA 3J VS Holden Commodore. Ex Dan Russo Commodore Cup car with chrome moly roll cage, Comes with Fresh ex Gene Cook 253 engine with com cup sump, super T10 Dog box 4 speed,Romac full floater rear end, Big bearing front hubs, Bilsteins suspension with brand new Rota 18" x 9"rims and com cup brake package along with aims dash & coms radio wiring. New air Jack system fitted to car. WP: 1:06 SMSP 1:44 Car comes with extensive spares package which includes most parts to install a LS into the car.
10
Roll CageLog Book
VS commodore cup car. Built new by Dean ORR of Perkins Engineering, and never raced as class was cancelled prior to completion. The shell was a NOS lightweight shell with no Holden VIN or chassis number. Running 253 Gene Cook race engine. Aluminium Commodore Cup car heads. Super T10 PPG dog box full floater differential Alcon 6 spot brakes. AIM dash. Race Tech seat PWR radiator. Currently Logged as improved production but most suited as entry level sport sedan. Car has only completed in a hand
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
15
Roll CageLog Book
CSV Volanti Production Touring Car. Car under went full restoration 3 years ago. Engine and transmission rebuilt 2 meetings ago. LS1 engine comes with cnc ported CSV spec cylinder heads which made 415hp at the wheels.CSV Volanti comes with homologation paperwork, Difilipo ceramic coated headers & XForce exhaust, 6 piston HSV front & Harrop rear brake calipers with circo endurance pads along with Nitron Shocks, Motec dash, New Racetech seat with RPM endurance harness, Full spool diff with 3:9 gea
9
Roll CageLog Book
Holden Torana LJ Race Car, or Road Car. Group N race car. Can be converted to a road car. Owner can assist with road registration. Full Log Book with Race history. 202 quality motor with Triple 2" SU's. Fresh M21 gearbox. BMW discs with Volvo 4 spot calipers. Koni shocks. Full steel welded cage. Quality paint respray. Billet fine spline rear axles, matched to mini spool diff. Full braided, tefflon fuel lines and filters; tuned to run on the latest high octane fuels. Brake rotor ducts. FIA
5
Roll CageLog Book
Ready to Race, Australian GT3 Trophy Series Champion in 2019. This is an awesome car to drive and is still very competitive with lap times at QR 1.09 The engine has just been completely rebuilt with run in hours only, Motec ECU, Dash and Logger have been fitted so you can tune for your needs. Come with 4 sets of spare wheels and other spares, all other spares and information are available from Reiter Engineering. This car presents in very good condition and has been looked after by professional