143 items in Australia for sale

Call Kevin 0418538961 Open to offers. Car is located in Melbourne LJ Torana 2 door Sports Sedan. Only used for sprint days at Sandown Raceway, Melbourne. Motor has only done 2 sprint days since rebuild by Hocking Engineering. Originally cost to build the engine was $30K, 350HP at the wheels Cams approved roll cage Log book 3.8 V6, dry sumped, injection, scat crank, argo rods, roller rockers, heads worked T5 Gearbox Weight is about 1100Kg Fibreglass doors, bonnet and boot lid. Lexen windows P

CAMS LOG BOOKED NO RUST 4 DOOR TORANA BUILT IN MIND OF THE GROUP C A9X APART OF HAVING OVER 500 HP BUILT WITH ALL NEW PARTS GROUND UP. TESTED AT QUEENS LAND RACE WAY 30 LAPS AT 7,000 TO 7.5000 OIL PRESSURE STAYED AT 50PSI 60 TO 70 ON START UP,CAR STOPPED CORNERED DROVE FANTASTIC BRAKE PADS ARE PMU USED HAS CLUB REGO,BUT IS A FULL 100% RACE CAR 308 RACE ENGINE COME RACING BILLET 3.55 CRANK,H BEAM 1.125 RODS,WISCO .020 PISTONS,CLIVE ROLLER CAM,T-BAR CPMP PRO ROLLER LIFTERS,OIL GALLERY DELIVERY

Major upgrades include, uprev tune 5 stage by rev zone, 230kw @ 6764rpm (315kw at fly wheel) coil overs with eibach linear springs - 9.5kg rear / 11kg front. Cusco RS 1.5 weigh LSD Z1. Motor sport dif cooling cover AP racing 6 pot front brake kit with endless ME20 pads. Akebono 2 piece rear rotors with endless ME20 pads. Stillen front splitter Stillen front canards. Z speed aluminium under shroud. Rev Zone custom front alloy under tray. Evo R rear wing, Stillen gen 3 long range intakes, Stillen

For Sale The fastest trophy car in Australia, car is immaculate inside and out. This car finished 2nd outright in the 2016 Bathurst 12 hour and 8th outright in the 2017 12 hour, the car was re-shelled and serviced by Nismo Japan after the 2017 race and was never raced. I purchased the car from Nissan Australia last year and competed at Challenge Bathurst where I posted a time of 2.05.01 with a 3 tenth lift due to traffic, we then raced the car at the 1st round of GT World Challenge at Phillip Is

Built in White with fresh paint this car is a collectors item or race enthusiast dream. Soon will be eligible for Historic racing. This is a Kesler car Demo and was never raced as we understand it. Pristine condition. Was purchased as one owner here in Australia Driven once had small ding front right has been repaired by Extreme Industry's with Ferrari parts. has carbon fibre front clip. New under trays for the fastidious owner. Original engine and gearbox. Also have a spare car that would be su

Genuine Ferrari Challenge Factory two Seater 360C Did all the major race events in Australia. 2000 to 2004 Prancing Horse Racing Scuderia Car. Colour Yellow. 2005 to 2006 Hughes Supercar Services Race preparations and maintenance for client. Ted Hugin. 2007 Hughes Supercar Services Race preparations and maintenance for client. Nick O Halloran. 2008 to 2015 Maranello Motorsport. Race preparations and maintenance for client. Andrew Barlow Colour Silver 2016 Private trackday car Previous

I have a Japanese Coupe which was purchased for spare parts. Car is nearly complete has had some damage that was repaired with new parts. may not be registerable in Australia due to the way it was imported need to check with Authority. Good for spare parts for racing car. ie Engine, Gearbox, guards, front end etc. Complete interior could be sold to recoup costs. has LH and RH dash components. This car could be used for Club events or Targa's. It may be possible to register if Australian complian

Ready to race current spec APRA race proven winning car. Motor only 140 klms, 1 race meet old. SR20 Gearbox done 4 meetings. Controlled suspension 6 meetings CAMS National spec roll cage CAMS log booked ASSA log booked All the good gear at no expense spared on build and maintenance. Electric water pump Electric power steering Cold air box New clutch Remote oil filter Oil cooler Oil accumulator Brake booster delete Braided brake lines, brake bias to rear brakes. Nolthane bushes throughout. New i

RE LISTED Nissan Exa Sports Sedan ROLLER Cams log book Well known Victorian car. Full space frame / fibreglass panels. Built to suit 20b rotary. Left hand drive. Lots of original spares, supra gearbox and remote shifter, tail shaft, R200 diff (plus spare) Full 20b exhaust system, muffler and side outlet. Moulds, spare fiberglass bonnet and front spoiler, clutch & flywheel, front engine mount & engine / gearbox mount plate. 16x10 wheels with slicks and spare 15x10 with wets. Fuel tank, lines with

Full roller ready for any engine combinations you wish Nissan Skyline r33 1995 full roller $14,000 Motor an all parts to do with motor is sold Only have the gearbox available If not I will just keep the car As I have owned this car for over 21 years I started building it about 15 years ago and then it was put into storage for over 10 years Car still has got all of its identification plates The rego run out about 16 years ago I believe it still can be registered in south Australia Ch

2000 vt v6 wanting to sell, for someone to use as a drag racing car, engine is still good, seats need to get change over, car windscreen got damaged by someone who vandalised it, and front passager window is broken, hence why I'm selling it to anyone needing a good car to modify for drag racing or doing donuts on the track. Unlicensed.

1986 Holden Commodore VL Sedan Track Car - 3L Petrol - 5 Speed Manual - RWD - 182,071 klms RB30 Stroker (3.4L) Mini Spool VN Axles 5 Point Safety Harness Full Cage Fuel Cell Previously scrutinised.

Commodore Vr/Vs Totally professionally built and still in great condition. Currently has Improved Production Log Book. Race car is sold without engine and gearbox ready for your own transplant for the category. Has full floating axle diff with full spool, spare ratios, big brakes, and extensive spares. Race car can be carbureted or fuel injected engine with high tech fuel tank and fuel system. Option for purchase a fully reconditioned complete 355 stroker motor to be assembled and with a gearbo

1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers