63 items with Roll Cage for sale

**PRICE DROP** 2004 Holden VY Ute Drag Car 468 BB CHEV (selling turn key) Monaro front clip, Steel shell & Alfa glass panels. 9 inch rear with 455 nodular 35 spline spool & Mark Williams axles. Macdonald Bros 4 link rear end with sway bar & strange shockers. Light weight K frame with new struts & Wilwood front brakes and master. Advanced headers customs pipes, BG fuel pump, alloy radiator, MSD power grid ignition. 15x14 Weld racing rears & 15x3 front runners. Weighs 2590 lbs without driver.

FOR SALE V8 5ltr 304 stroker engine with 650 double pumper Holley carburettor Pacemaker headers with side pipes Strut brace Power steering cooler 9.5lt winged sump 6 speed Tremec gearbox 10 bolt LSD Bilstein shocks all around Fully seam welded Near new Wilwood front callipers, VL callipers on rear 6 point welded cage Wired to rally safe standards 80 litre fuel cell 6 point harness 17 x 8, 17 x 10 custom Simmons Velo seat Log booked for both CAMS & AMSAG Presents very well for the money. Jump i

Holden lj torana historic touring car , 295 hp 202 roller cam engine full girdle bottom end blue motor crank matched ported intake and exhaust triple 45 dcoe webers electronic ignition , centre throw hydraulic clutch , L34 ratio gearbox spare m21 gearbox , diff full spool 3.08 3.36 3.55 strengthened main caps 28 spline axles adjustable pedal box BMW vented front discs Volvo 4 spots , large adjustable koni shocks king springs, 2 sets 13x7 hot wires plus 1 set 13x6 hot wire with wets

The car was built by Paul Morris Motorsport, chassis No. ‘Kulwicki’ for the 2009 Championship Series, driven by Russell Ingall in Supercheap Auto livery. Please contact us for pricing and more information.

Vz commodore race car, this car is a newly built car everything on the vehicle is basically new I have only completed 1 event. Running gear: diff has been rebuilt with tru track centre with 3:7 gears, trans is standard, engine had full rebuild, honed block,rings,bearings reco heads with springs to match the new crow race cam and hand ported, trunnion upgrade, mellings oil pump, 92mm throttle body, sheet metal intake, ally radiator,moroso oil accumulator Ecu: standard ecu with stand alone wiri

Here we go, was original 2001 HSV VX GTS300, build number 044 and I started doing some track days and then lots of track days and then NZ Superlaps and now I have a full-fledged race car with rego EDE220 on hold. Engine is an L98 that has been bored and stroked 408CI and delivering 572 RWHP. All engine build sheet and dyno sheet are included in the pics, has Castle headers with 2" primaries into 3.5" MRX side exhaust, inlet is FAST with 102mm throttle body. This is coupled to a 6 speed TTI tra

IPRA Holden Monaro Current National #1, Lap record holder SMP, Phillip Island, The Bend. Holinger RD6H Tilton 5.5" 3 plate HRT Mag bell housing - reverse starter Harrop 9" IRS Adjustable Bars F & R Many lightweight parts Full Motec C127, PDM30, M150 ECU, Motorsport Loom ATL Kevlar Bladder Tank / Bosch motorsport pumps Tyre Temp Sensors x 4 MCA Gold Series Suspension Alcon Supercars calipers F & R - AP rotors LS - Darton sleeves, Callies crank, Higgins custom heads, Morrison ITB Built from new

Up for sale is my Vy commodore track car The engine is a 6.2 LS with a standard crank H beam rods and forged pistons It’s got a mild cam with upgraded pushrods, LS7 lifters, double valve springs with locks and retainers to suit, crow cams trunion bush upgrade into factory rockers mellings oil pump with double row timing chain custom modified VY sump to hold more oil with improved racing products baffle inside, it’s got a 102mm throttle body and over the radiator intake, custom catch can with 2 -

2002 Nissan Skyline R34 GTR MSPEC tuned by Full Stage Japan HKS STEGE III 2.8L STROKER KIT GT2530 x 2 EVC F-COM NEW GEAR BOX (GETRAG) CARBON TRIPLE PLATES CLUTCH IKEYA FORMULA LOWER ARM INJECTORS FUEL DELIVERY FUEL COLLECTOR TANK ARC RADIATOR FRONT INTER COOLER TRUST MUFFLER CARBON DOORS CARBON BONNET CARBON LID DRY CARBON REAR WING ENDRESS BRAKE CALIPER (MONO BLOCK) NISMO METER BOOST 1.2 550 ~ 580 PS BOOST 1.7 600 ~ 630 PS Only ran 300kms after the engine build Car is still in Japan $180,0

Selling Complete Running Racecar (Front Running Racecar in its category) The car has the following: - Ex V8 Commodore Cup - 6.0L L98 Carburated - T56 6 Speed Gearbox - Haltech VMS ECU - AIM Data Logger Dash - AP Racing Brakes (6 pott fronts and 4 pott rears) - Willwood Pedal Box (under dash) - 500RHP - Has won the Super TT over 2L Treaded Championship 2022 - 850cfm Brawler Carby - V8 Supercar front bar - GTSR Rear Spoiler - 1-7/8 Primary's to 4 into1 3inch collector - Cams approved roll ca

One of 2 x A9X’S used by Bob Morris to win the 1979 Australian Touring Car Championship (ATCC). Raced Bathurst 1000: 1977 and 1978. ATCC outright wins in 1978 and 1979. 3 owners from new, original cams logbook. Raced in period by multiple Le Mans 24Hr, Daytona 24hr, Spa 24Hr, Bathurst 1000, Indy 500 winners: DEREK BELL, DIETER QUESTER, JONNY RUTHERFORD, JANET GUTHRIE & of course; BOB MORRIS. Original, unrestored and magnificent. More pictures and information at: https://www.ecuriebowden.c

Honda Integra DC5 Type R – Production Touring car Extensive history with Bathurst 12 hour class victories, Amchamps class victories and State class victories to its credit. Clean car and maintained (to a high standard) more than it is driven. Originally built from a brand new 0klm shell by Conroy Motorsport, it is a satisfying car to drive and makes a noise that would put a smile on anybodies face! This is a highly competitive car in its class, and would make an exceptional base for the Bathurst

Holden LX Torana 4 Door Complete bare body Shell. All rust removed from body shell, new sills, A pillars, floor, boot, etc etc. Repair invoice available on request. All body deadener removed. Body has been stich welded. Wheel arches not done due was going fit race flairs. Body in bare metal and rust coated. Drivers door slight mark. Body ready for roll cage.

FOR THE FIRST TIME IN OVER 15 YEARS, WE ARE PROUD TO PRESENT PERKINS ENGINEERING HOLDEN COMMODORE V8 SUPERCAR PE036! 1999 PE036 Castrol/Perkins Engineering V8 Supercar “Silver Bullet” driven by the Enforcer Russell Ingall. Bodied as the road going VT commodore, this amazing machine was the forefront of the V8 touring car series in the year 2000. Larry Perkins with his Castrol sponsored holden Commodores always proved to be a crowd favourite. PE036 debut to the V8 touring car series was proving

Historic Gemini Coupe Sports Sedan. Originally built by John Brookfield for Peter Brock, circa 1977. Previous owners include Rowan Harman, Robin Doherty, Darren Hossack, Grant Munday, Stephen Craig. ENGINE:- 13B Extend Port FD Series 6, Ceramic Apex Seals, Balanced and matched rotors, custom exhaust manifold, modified inlet manifold, Full Throtle Engineering crank sensor, Bosch Motorsport 2000cc injectors, OS Giken triple plate clutch, Borg Warner 91/74 alloy core turbo, 1.45 twin scroll exhaus

Honda is in my opinion one of the nicest made and presented TCR cars available on the market. This car was built new by JAS motorsport in Italy and originally owned by Finlay Crocker in the UK and imported to NZ by us in August 2019. Honda is one of the only TCR cars to run Motec software Total KM's - 7821kms (Gearbox and chassis) Brand New Engine and Turbo Fitted before HIghlands NZ Finals in 2020. New engine and turbo has done 1441kms only. Replacement recommended by JAS Motorsport at 7000km

-EDITED 26/9/2024 - final price change before car is removed from sale and stored- 1993 Honda Civic EG5 hatchback, logbooked as 3J Improved Production. Fitted with B16B Type-R 1.6-litre engine and Type-R S80 five-speed gearbox with 1.5-way Kaaz LSD. Raced for the last three seasons in IPRA NSW Under 2-Litre. Audited at recent MA round at SMSP (passed). Belts, harnesses etc in date Built to be fun to drive, easy to work on and affordable to run. Regularly serviced and maintained by profess

Call Kevin 0418538961 Open to offers. Car is located in Melbourne LJ Torana 2 door Sports Sedan. Only used for sprint days at Sandown Raceway, Melbourne. Motor has only done 2 sprint days since rebuild by Hocking Engineering. Originally cost to build the engine was $30K, 350HP at the wheels Cams approved roll cage Log book 3.8 V6, dry sumped, injection, scat crank, argo rods, roller rockers, heads worked T5 Gearbox Weight is about 1100Kg Fibreglass doors, bonnet and boot lid. Lexen windows P

CAMS LOG BOOKED NO RUST 4 DOOR TORANA BUILT IN MIND OF THE GROUP C A9X APART OF HAVING OVER 500 HP BUILT WITH ALL NEW PARTS GROUND UP. TESTED AT QUEENS LAND RACE WAY 30 LAPS AT 7,000 TO 7.5000 OIL PRESSURE STAYED AT 50PSI 60 TO 70 ON START UP,CAR STOPPED CORNERED DROVE FANTASTIC BRAKE PADS ARE PMU USED HAS CLUB REGO,BUT IS A FULL 100% RACE CAR 308 RACE ENGINE COME RACING BILLET 3.55 CRANK,H BEAM 1.125 RODS,WISCO .020 PISTONS,CLIVE ROLLER CAM,T-BAR CPMP PRO ROLLER LIFTERS,OIL GALLERY DELIVERY