SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

60 items for sale

Refine Search

Clear All
Keyword
Price
Minimum
Maximum

Featured ads

All Results

9
Roll Cage
Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.

Pakenham VIC, Australia
Share
Watch
3
Roll Cage
Fully Updated Massive spares package (including spare engine and transmission)

California, USA
Share
Watch
97 1
Roll Cage
This left-hand-drive, GM Australia-built Holden Monaro is a real head-turner and the perfect car for the collector, professional racer or track day enthusiast – or the same person all wrapped up into one! The Monaro was assembled by GM Holden at Elizabeth in South Australia and is believed to be one of only a handful of left-hand-drive examples in the country. The odometer reads 31,739kms of which the vast majority (~31,000kms) were driven by Holden engineers at the Lang Lang proving ground in

Calder Park VIC, Australia
Share
Watch
10
Registered
Mazda MX5 2009 NC2. Great daily driver and weekend track car. Extensive modifications as follows: FD RX7 wheels & Bridgestone RE003 tyres - Yellow dot sway bars - Yellow speed endinks - Silvers coil overs - Racing Beat headers - GWR mid-pipe - Ecutek tune with autoblip, launch control etc - Autoexe cold air intake - 4.1 lsd - T3 rotors with braided lines and carbon tech pads - Guardians design steering wheel - Fire extinguisher - Stubby antenna - Kenwood headunit with Apple CarPlay - RX8

The Gap QLD, Australia
Share
Watch
19
Registered
This 500HP Midnight Purple 3 R34 is not a car you can just go out and buy in this condition. I recently won this car through a raffle with Vincere Australia, who bought the car off of a woman who did the majority of the modifications. The paintwork, the body kit, the extensive modifications to reach 500HP reliably AND legally, really proves that this car was loved and cared for before I owned it. I have a tracked down a full history of the car in Australia; when it was imported, who owned it,

Woolloongabba QLD, Australia
Share
Watch
10
Rx7 built in 2014 By Jeff Holland JB Fabrication Central Coast. Has run a 6.4 1/4 mile Carbon front clip fibre glass rear half including doors (Comes with moulds for front clip & doors) Strange front spindle single adjustable shocks with TBM twin piston brakes light weight Rear shocks double adjustable both just been serviced. Strange 4 piston brakes and steel discs. 2 fire bottles 2 parachutes new cables cylinder springs 2 new 15x15 weld rims DBL with new 33x15x15s slicks Front spindle wel

Nerang QLD, Australia
Share
Watch
70
Registered
When HSV said they saved the best till last, they were right. The Holden VN Group A was something else when released in 1990. Being the lowest production built HSV and even compared to by some to the Ford Falcon XY GTHO. Here is your opportunity to own what could easily be described as the best example of a VN Group A. in existence. Owned personally up until 2018 by the D’Álberto family, owners of the reputable D’Alberto Holden dealership in Echuca, Victoria. Initially HSV planned to produce 50

Kogarah NSW, Australia
Share
Watch
59
Registered
The Holden Special Vehicles SV5000 was a proper V8 bruiser and was built in very limited numbers (359 in total) between 1989 and 1991. Based on the VN Commodore, the SV5000 started life in Holden’s Elizabeth plant in South Australia before being transferred to the boffins over at HSV, who were located in Notting Hill in Victoria at the time. This particular SV5000 is finished in SV Racing Green, one of only a handful of colours available on the SV5000 model. Both inside and out this SV5000 prese

Kogarah NSW, Australia
Share
Watch
71
Here is yet another stunning example of a SS Group A Walkinshaw. Once again, this car was originally part delivered to the D’Alberto Holden dealership in Echuca Victoria and kept with the D’Alberto family as part of their private collection until 2018 which was never registered and still remains unregistered with its original blank logbook meaning you could be the first private owner of this very special HSV. In that time the car was only used for maintenance purposes and to this day has only cl

Kogarah NSW, Australia
Share
Watch
15 1
Registered
Roll Cage
Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford

Cockburn, WA, Australia
Share
Watch
9
Professionally New Built Can be registered Willwoods Brakes All Round Build for 1,500 HP Call 0413 878 516 $40,000

Gillman SA, Australia
Share
Watch
10
Registered
Log Book
*May trade for a circuit car* Super tuff HQ LS Monaro coupe Older restoration, awesome body and immaculate interior. Big $$$ Holden stroker engine,making 568hp on the engine dyno,running on 98 with a streetable 11.1 comp. 11.2 1/4 na 10.7 100 nos shot Details of driveline in photos Regretful sale, but wanting to pursue circuit racing, Will consider a deal with a well built Holden circuit car

Riverside TAS, Australia
Share
Watch
6
Registered
Holden Torana sedan 1975 LS1 / T56 F.A.S.T. intake AFR cathedral port heads Comp Xtreme Energy cam 2000-7000 224/230, .581"/.588" lob sep 114 Comp cams hydraulic lifters Yella Terra true roller rockers Accel 40lb/hr fuel injectors Mal Wood Under dash Hydraulic clutch pedal assembly Mal Wood Reconditioned T56 and organic clutch B&M shifter Altra 9 A9 axles 28 spline Wilwood Dynapro big brake hub kit 12.19" diameter vented rotor Wilwood Brake master cylinder and Combination proportioning va

Bundaberg QLD, Australia
Share
Watch
5
Roll Cage
Log Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Adelaide SA, Australia
Share
Watch
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec

Caloundra West QLD, Australia
Share
Watch
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1

Mount Crosby QLD, Australia
Share
Watch
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Aberfoyle Park SA, Australia
Share
Watch
10
Registered
Clubsport R8 tourer 2012, manual.I have owned this vehicle for the last 8 years and all modifications have been done in those years. It’s making a safe 600rwhp and 990nm on pump 98. It was the wife’s daily driver when she was working but has not worked for a few years and since then has only been a weekender when we have the spare time. It has always been garaged and washed and serviced regularly. List of some Modifications are: -VCM 714 cam package -Magnuson heartbeat 2300 supercharger -NPC d

Wyee Point NSW, Australia
Share
Watch
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U

Narellan NSW, Australia
Share
Watch
10
Roll Cage
Log Book
VL Calais - Drag Car Roller Set up for SBC and glide Comes with, engine plates, pipes & tail shaft to suit. Full Chassis 4 Link Drag Car. Setup by John Willard @ Flatout Services. Funny Car Roll Cage. ANDRA & IHRA Tech Front Race Struts. Mark Williams Diff Center with new 4.56 gears 35 Spline MW Axels. Koni Drag Race Double Adjustable Rear Shocks. Adj Wheelie Bars Custom Alloy Fuel Cell Wiring, Shifter with Dedenbear shift solenoid, Gauges, MSD 6AL, Chute, Harness, Window Net etc. Wil

Baulkham Hills NSW, Australia
Share
Watch