25 items for sale
Most Recent
Most Recent
Keyword
Category
Price
Listing Type
All Results
6
Roll CageLog Book
1968 Camaro - Built by Alston race cars in USA. Build no. 3040. Full steel bodied and bumpers with wind up windows Three quarter tubed chassis car Fibreglass bonnet and boot Ran with 522ci nitros motor with 400 shot. Ran a 7.84 over the quarter Always runs straight MSD grid 8 New MT 32" tyres As a roller with MSD (everything less motor and trans) $85,000 With turbo 400 rated at 2000hp and Al's glide air shifter with two neutrals $95,000 Can include complete Big Duke heads, 800hp nitros kit wi
67 1
Registered
The Mercedes-AMG CLK63 Black Series will go down as one of the wildest (and most desirable) factory race homologation series ever produced. Only 500 were constructed to meet the race-ready criteria, the majority of which were sent to the USA where they were unfortunately delivered with ‘comfort seats’ due to local legislation. Just 120 were produced in RHD with 32 numbered cars delivered to Australia. This stunning example is vehicle #8, and unlike the American counterparts, it has factory fitt
49
Registered
Taking their most pedestrian model, injecting a Porsche tuned 255 horsepower V6 monster into where the rear passengers should sit and fitting a swathe of bespoke performance kit and trim, Renault produced an off the Scoville scale hot hatch that refreshingly reminds us cars can be so much more than just body haulers. The car to own is the Phase 2 launched in 2003 - a significantly altered car from the Phase 1 with the ability to plant all that raw power down onto the road and handle like Michae
68
Registered
Sport. Leicht. Rennsport. There aren’t many cars the high side of the year 2000 that upon launch were instant icons. The three that stand out the most are the Ferrari Enzo, the Porsche Carrera GT, and the car we present here, the Mercedes-McLaren SLR. A joint venture between Mercedes-Benz and McLaren Automotive, the car was conceptualised as an homage to the Mercedes-Benz 300SLR of 1955. With the Formula 1 partnership between the two companies, there was a significant pooling of resources that
12
Roll CageLog Book
Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,
35
Registered
This Mercedes AMG C63 is in excellent condition inside and out and not modified in any way. It has always been garaged and lived a pampered life by all of its owners and has always been serviced by Mercedes Benz until current and has only travelled just over 79,000 kilometers. It also comes with two keys, logbooks and purchase certificate from 2014. The Mercedes has never been on the track. Being a 507 Edition also adds to the desirability of this model along with the fact it is the last of the
9
Roll CageLog Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
3
This Evo updated Mercedes AMG is a great example. It has proven fast and reliable with a front row qualifying efforts and toping the time sheets many times in 2023. The main loom is still pre-evo spec. ABS M4, EVO brake cooling is in the car and always serviced to HWA mileage recommendations. This car was imported and run by Volante Rosso Motorsport. Volante Rosso Motorsport are available to continue running the car for the new client in Australia to continue it's success on track. Car Mileage:
5
Comfortable and reliable for endurance/bash rallying, featuring, 6x steel wheels good rubber, bull bar, driving lights, sump guard, roof rack with light bar, tinting. Good runner NO RUST.
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sports and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
19
Roll CageLog Book
Targa Tarmac Rally car; built by Walkinshaw Performance for Renault Australia for Targa, mostly recently looked after by TMR. Ready to race package compliant to current Australian Tarmac Rally (ATR/AASA) regulations, comes with tons of spare parts. Surprisingly capable and well handling package; recently came 2nd in ATR Super Rally class. Genuine reasons for sale (surplus to requirements - have another Tarmac Rally car). Will also suit buyer looking for a track car. * Only 22000km * MA/CAMS
9
RegisteredRoll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo
4
Roll CageLog Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin
7
Roll CageLog Book
**Price Drop Update** The Camaro has been fully serviced since competing at the Gold Coast and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in which it finished 6th Outright for the season. It was built by Steve Vigurs of Steve's Toyshop, a well renowned s
32 1
Roll Cage
General: Full chrome moly tube chassis by Chris Alston in California. Glass front, steel doors and rear. New Tailgate, body stripped and repainted in custom pearl blue. Custom wing, wheelie bars, parachute. 20l alloy fuel cell, new rear mounted battery. Linelock and quick release steering wheel, 5 point harness, alloy ice box. Completely rewired throughout. Certified by both NZDRA and IHRA. All fabrication done by Raceworks in 2021. Engine: 427 LS7 built by Steve Morris in USA in 2021, approx 10
6
Chevrolet S10 Drag Race Truck Chev 434 Small Block* Race Engine Roller Camshaft AFR 235cc Cylinder Heads NX Nitrous System MSD Digital 7 Vacuum Pump This vehicle was even featured on the front page in the USA Milodon Catalogue for many years Runs a BTE Race Glide with Trans Brake Electronic Controlled Shifter Weld Alumstar Wheels - Rear 15x14 with 33 x 14 r15 tyres Front 15 x 3 25/4.5-15 Contact us at Engine Master Australia for more information!
10
Roll CageLog Book
Gary Hansen RaceCraft built (USA) ex Pro Stock, complete roller, Koni electric shocks, Race Pack dash, race pack SC 1000 data logger, Lamb brakes, Ron Davies radiator, 40 spline Mark Williams axels, Weld Magnum wheels.. too much to list Has gone 7.22 @ 191 mph, will suit a wide variety of classes This car has less than 200 passes Please call for more information