81 Car, Bike or Kart in Australia for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
6
1997 R33 GTR 16x,000 kms R35 coilpacks with Raceworks billet bracket HKS Coilovers Twin plate clutch Wedsport TC105 New S3 Front lip Oil filter re-location Ganador side mirrors Momo Monte Carlo wheel (will come with stock steering wheel) Based in Melbourne but happy to assist with transport
5
Roll CageLog Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3
12
Roll CageLog Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1
10
Roll CageLog Book
Hyundai excel log booked and sealed cup car. Built 2021 Current spec supashocks Current spec Dunlop Direzza tyres scrubbed. 2 race meets old Brand new winmax 6.5 brake pads Front rotors one race meet old. Steel braided brake lines and clutch line SARD fuel pressure regulator Head work completed by head torque Osbourne Park Standard bottom end Main cap bearing support installed AGI bolt in roll cage Nugget project gauge pod and brake ducts Pasariss exhaust Custom intake Brown davis 2L catch can
1
Roll CageLog Book
Hyundai Excel racecar 2023 victorian club championship winning car . motorsport australia logbooked 2019, very competitive and well known car. les small engine / exhaust / alloy radiator/solid engine mounts/airbox / AW race prepared gearbox and short shifter. brown davis bolt in roll cage mychron 5s dash. SE Motorsport bushes / dash mount & brake bias. will be sold with a full spares package. located knoxfield
10
Roll CageLog Book
Circuit excel race car Motorsport Australia logbook Engine- Low km twin cam, Misch 3 core radiator New water pump IAC blocking plate New valve stem seals Custom air box / Pod Raceworks FPR Brown davis oil catch can Engine dynoed at 60.1kw Exhaust Custom 2" with rear muffler Interior Brown davis roll cage Velo Apex XL FIA seat Velo 6 point ultralight HANS/FHR harness Current Reg window net Velo steering wheel Misch short shifter Custom shifter riser Misch Aluminium alloy drivers floor
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.
21
Roll CageLog Book
PRICE DROP!!!! FOR SALE: Brand New front running top HP Excel Race car. Brand new 2024 build, top HP in Australia, VERY fast car! Perfect for someone wanting to strap into a brand-new well-developed/ built car and win races. 2 x Winton shakedowns under its belt, last shakedown was completed on 28/01/2024 where this car was the same pace as Blake Tracey's car and 2 other national race winning excels all day completing 28 fault free laps. The car was running new full tread depth Federals which
5
Roll CageLog Book
1998 Hyundai Excel race car 2022 Series X3 NSW championship winner, lap record holder with multiple poles and race wins. Only raced twice in 2023 * MA log booked * Control Supashocks * Bond weld in National roll cage * ACT AutoWorx Engine (one race meet old) * Custom Exhaust * Sparco race seat with 6 point harness * Quick release steering wheel * Short shifter * Aim Solo 2 GPS lap timer Car is always well maintained with fresh oil and filters after every race meeting and only new parts u
7
Roll Cage
️ FOR SALE: 1999 Nissan Pulsar - Small Car Cup Racing Beast! Are you ready to experience the thrill of grassroots motorsport at an unbeatable price? Look no further! We present to you a meticulously modified 1999 Nissan Pulsar, a regular second-place winner at the Pheasant Wood Circuit in Marulan, NSW. Key Features: Proven Track Record: This powerhouse has consistently clinched second place at the Pheasant Wood Circuit, showcasing its prowess on the racing track. Small Car Cup Racing
19
RegisteredRoll CageLog Book
NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca
15
Roll Cage
Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do
5
Roll CageLog Book
Race winning Hyundai Excel for sale. Car has been competitive across the country. Car had an overhaul in 2023 and has since been repainted new panels for sale. The car was raced by Max Geoghegan in 2022/2023 and driven by Treigh Maschotta in 2021/22. The car has won multiple races, comes log booked and has gearbox and motor sealed with seal sheets. Welded cage. New Mychron 5. Donor car and other spares and parts are available such as hubs, panels etc... Car will be sold as per new condition se
10
Roll Cage
We are offering a time attack car built by Full Stage Tuning Garage in Osaka. It ran in Tsukuba & Central Circuit Car Specifications SPIRIT SPEC S (FULLTAP) FRONT 14K REAR 14K NISSAN FRONT SUSPENSION MEMBER NISMO ENGINE MOUNT NISMO STEERING MOUNT REBUILT FRONT DRIVE SHAFT LACK & PINION REBUILT REAR MEMBER RIGID REAR DIFF RIGID PILLOW BALL FRONT AXLE BY IKEYA FORMULA DIXEL FRONT BRALE ROTOR SARD INJECTOR x 6 (550cc) SARD FUEL PUMP (295L) HKS V-PRO (Ver 3.4) HKS CAMSHAFT IN256 EX256 HKS CAM S
10 1
RegisteredLog Book
201,000km (1,000km on Rebuilt engine) 274 rwkw, NA, VQ35DE engine Build Story is here: https://instagram.com/luthienz Professionally Rebuilt Engine and Drive Train @200,00km Engine Rebuilt by Ron Milton in QLD who specialises in race engines. Rest of the build completed by RP Motorsport in Sydney. Roadworthy, Registered and insured (Shannons). Suits a conversion to a Race Car. Selling as I don't have the time to convert and use it to its potential **Mods: ***Rebuilt Engine JE Pistons (1
14
VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun
9
Roll CageLog Book
NISSAN 300 ZX ROLLER, NO ENGINE OR TRANS FULL TUBE CHASSIS FOUR LINK REAR LIGHT WEIGHT SPINDLE MOUNT FRONT WHEELS 9 INCH DIFF WITH FULL FLOATER 40 SPLINE AXELS CENTERLINE CONVOPRO WHEELS BUILT FOR SUERSTOCK GAS CLASSES RAN 9.0 SECONDS 150 MPH IN D/GAS WEIGHT WITH 300 CUBIC INCH ENGINE WOULD SUIT TURBO CHARGED CLASSES