15 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
11
Time has come to sell the reserve race car. Was purchased as a stat write off (fresh water damage - sunroof left open) 195k on the clock Heavy duty clutch BC coilovers Whiteline front and rear sway bars and link pins with rear braces Front strut brace Afm gauge Boost gauge Turbo back exhaust (has scrapes on mid pipe so minor exhaust leak) Invidia mufflers May have a tune on it but would suggest having your turner check. Car drives very nice. gearbox feels great. Engine sounds clean and ver
10
track car all wheel drive built for pheasant deputy 4 hr series aasa log book 2 sets of wheels radio intercom new clutch fitted new timing belt race brake pads cheap track car also suitable for production car racing
8
2004 Subaru Forester This was our shops hill climb/super sprint project but due to our current racing we are short on time to finish. Car is running, driving and operates fully. Interior stripped, racing seat and harnesses fitted, harness bar Fuel surge system installed BC Racing coil over kit installed 4/2 pot brake WRX calliper kit with associated bracketry to install supplied, modifications have been carried out to fit the kit, just needs instillation. 17 inch WRX light weight wheels wit
5
Log Book
Race/track use only, cannot be road registered. Imported under race/rally criteria. Vehicle located in Hobart. Can assist interstate buyer. $120,000 AUD 2008 Lamborghini Gallardo Superleggera 5.0 V10 530hp Auto/E-Gear 8000km on the clock 3 Owners 2 Keys Imported for "race use only" which means club/track rego only. Hence the price tag. Professional paint job in white (originally yellow) No crash history, inspections are welcome. All Superleggera carbon parts have been removed and not av
2
Nissan R32 racecar, if you want to own the red Nissan than blew down conrod at over 200 miles an hour this is your chance or maybe you wish to wind 30 hp out of it and run it under the new 1.5:1 regs . This car has the full catalog of go fast parts and is offered for sale ready to race as it was presented last raced at Bathurst 12 hour. It’s offered for sale at 200k the price is not negotiable.
7 1
Roll CageLog Book
*****Price reduction***** 1988 Van Diemen It is the Michael Mortimer Australian delivered car. He won Sandown in it beating Larkham. https://www.youtube.com/watch?v=b27CXCJlVc0 and spun on the last lap at Bathurst whilst in third: https://www.youtube.com/watch?v=sA8_gcQZphg The car has only had 6 owners , including myself, in its life. Includes CoD, has just been re-powder coated, with new ali floor ready to fit, cermaic exhaust, performance alloy wheels. Needs assembly, complete except r
9
Roll CageLog Book
New IAG block with Cosworth heads PPG sequential gearbox, freshly rebuilt PWR Radiator 350mm x 700mm PWR Intercooler 350mm x 700mm Motec ECU Motec Camera DCCD pro diff controller Cusco Coilovers AP racing brakes OMP drivers seat Heated windscreen Perspex windows, sides and rear All custom subframes and front control arms 3 sets of wheels with a new set of soft Michelin Slicks Carbon front bar, bonnet, boot and wing Originally built for sports sedans but lately it's been used for time attack eve
12
Roll CageLog Book
1988 VAN DIEMEN FORMULA FORD $48,000 This car chassis number 1249 was the yellow prototype for the 1988 Van Diemen with Allan McNish involved in the development. It was then a works car for Van Diemen in 1988 with the Duckham’s oil yellow and blue livery. The car was raced by Derek Higgins and won the 1988 ESSO FF1600 and British RAC FF600 Championships. It was third in the 1988 Formula Ford Festival, number 47. In 1990 and again in 1991 driven by John Thompson it won the Western Canadia
10
RegisteredRoll Cage
MY03 STI Tarmac Hill Climb / Circuit Sprint Car Built to be reliable and fast • Aust Delivered MY03 STI • 207,000kms • Handbook Serviced and Upgraded at S&J Automotive o MRT S/S Turbo Back Exhaust o MRT 500HP Fuel Pump o S&J VVT Upgrade o EcuTeK Type 3 Custom Dyno Tuned with 210kw ATW o Rota 18 x 8.5” Wheels o Federal R-Specs 235/40 R18 o Half Cage o Harnesses o new Extreme competition clutch o Cusco Brake Support Bracket o Perrin Wing Stabilisers o Coil over suspension A very c
10
RegisteredRoll CageLog Book
Subaru WRX STI Version 3 Type R 2 door. 1344 of these version 3 sti's were built in total. All being sold locally in Japan. Blitz turbo timer Blitz Boost gauge Defi oil temp/coolant temp/oil pressure gauge S201 STI rear spoiler S201 Side skirts 22b Front Bar Kilometres: 78.478 Air Conditioning
8
Roll CageLog Book
Your chance to grab one of the most refined floor pan race cars going around. One of the two infamous Racetech performance Bathurst headline vehicles. Owner is building a space frame car this year and hopes to find a great home for this epic machine. This car has everything you need to enjoy a club day, win state titles or compete at a national level. You could strap some aero on and give WTAC a go. The options are vast. It has(and then some): -Racetech performance Bullet billet RB. All the b
5
Roll CageLog Book
This vehicle is arguably the #1 Hillclimb Subaru in Australia. Winning 3 Australian Hillclimb Titles, 3 NSW Hillclimb Titles, 2 Qld Hillclimb titles and numerous club Hillclimb championships. Additionally the vehicle came 2nd outright for the 2021/22 Whiteline Tarmac Rallysprint Series. Vehicle built by Blake Engineering, is a 2006 Subaru Impreza WRX. Runnings a 450kwatw Deshelle built engine, currently tuned @ 341kw with bucket load of torque. EFR 7163 turbo, Haltech Elite ECU, wideband and das
7 1
RegisteredRoll CageLog Book
1997 Japanese import v4 STI 90,610 km. Alloy bonnet swapped to standard at some time prior to 2002. Modified for circuit racing and tarmac rally with emphasis on reliability and handling. Fully registered in Tasmania since 2002. Driver's seat belt operational. Roll cage – CAMS logbook. Battery isolation switch with removable key, window net. Engine rebuilt by Robin Berado and associates in Brisbane. Street force modified heads, closed deck block (welded). Billet con rods, forged pistons and c
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.
1
Road registered club car, just completed. This car was my daily driver up till 2012 when it was put into storage. Interior has been semi stripped (parts kept), motor rebuilt, new clutch, MCA suspension, belts, almost standard just made better.