46 items with Roll Cage for sale

For sale is my logbooked CSV Mondo GT mock up (Holden Monaro) 3E Production car - Homologation document 3-16-001 with a large spares package. Also suitable for 3J Improved Production IPRA as logbooked naturally aspirated 3E cars are eligible as is. This car previously competed in multiple Bathurst 6 Hours which is why I bought it, only for it to be taken off the eligibility list a few months later, hence why I am selling it. Can be converted to HSV GTO which is still eligible. Car is extremely

Holden Commodore HSV Clubsport LS1 5.7ltr manual Engine built by Ravage Raceworks 325 rwkw LS6 inlet manifold , cnc ported heads roller rocker crow cam , high pressure oil pump, baffled sump , harmonic reduction balancer , ARP rod bolts, performance throttle body etc. Exceedy clutch T56 gearbox eaten tru trac diff with external oil cooler and fan/pump Acott suspension built front end, adjustable coilovers front and rear bilstein shocks adjustable front sway bar, AP racing brakes front 375mm

Team Dynamic VY Commodore Chassis #001, driven by Jason Richards. Recently restored. Fresh Engine 0km Fresh Ohlins Shocks 0KM Professionally prepared, turn Key and ready for Kumho V8 Series, currently presented in 2003 Richards #45 livery, a very clean and well presented car. Spares package included.

FOR SALE V8 5ltr 304 stroker engine with 650 double pumper Holley carburettor Pacemaker headers with side pipes Strut brace Power steering cooler 9.5lt winged sump 6 speed Tremec gearbox 10 bolt LSD Bilstein shocks all around Fully seam welded Near new Wilwood front callipers, VL callipers on rear 6 point welded cage Wired to rally safe standards 80 litre fuel cell 6 point harness 17 x 8, 17 x 10 custom Simmons Velo seat Log booked for both CAMS & AMSAG Presents very well for the money. Jump i

Holden lj torana historic touring car , 295 hp 202 roller cam engine full girdle bottom end blue motor crank matched ported intake and exhaust triple 45 dcoe webers electronic ignition , centre throw hydraulic clutch , L34 ratio gearbox spare m21 gearbox , diff full spool 3.08 3.36 3.55 strengthened main caps 28 spline axles adjustable pedal box BMW vented front discs Volvo 4 spots , large adjustable koni shocks king springs, 2 sets 13x7 hot wires plus 1 set 13x6 hot wire with wets

The car was built by Paul Morris Motorsport, chassis No. ‘Kulwicki’ for the 2009 Championship Series, driven by Russell Ingall in Supercheap Auto livery. Please contact us for pricing and more information.

Vz commodore race car, this car is a newly built car everything on the vehicle is basically new I have only completed 1 event. Running gear: diff has been rebuilt with tru track centre with 3:7 gears, trans is standard, engine had full rebuild, honed block,rings,bearings reco heads with springs to match the new crow race cam and hand ported, trunnion upgrade, mellings oil pump, 92mm throttle body, sheet metal intake, ally radiator,moroso oil accumulator Ecu: standard ecu with stand alone wiri

Here we go, was original 2001 HSV VX GTS300, build number 044 and I started doing some track days and then lots of track days and then NZ Superlaps and now I have a full-fledged race car with rego EDE220 on hold. Engine is an L98 that has been bored and stroked 408CI and delivering 572 RWHP. All engine build sheet and dyno sheet are included in the pics, has Castle headers with 2" primaries into 3.5" MRX side exhaust, inlet is FAST with 102mm throttle body. This is coupled to a 6 speed TTI tra

IPRA Holden Monaro Current National #1, Lap record holder SMP, Phillip Island, The Bend. Holinger RD6H Tilton 5.5" 3 plate HRT Mag bell housing - reverse starter Harrop 9" IRS Adjustable Bars F & R Many lightweight parts Full Motec C127, PDM30, M150 ECU, Motorsport Loom ATL Kevlar Bladder Tank / Bosch motorsport pumps Tyre Temp Sensors x 4 MCA Gold Series Suspension Alcon Supercars calipers F & R - AP rotors LS - Darton sleeves, Callies crank, Higgins custom heads, Morrison ITB Built from new

Up for sale is my Vy commodore track car The engine is a 6.2 LS with a standard crank H beam rods and forged pistons It’s got a mild cam with upgraded pushrods, LS7 lifters, double valve springs with locks and retainers to suit, crow cams trunion bush upgrade into factory rockers mellings oil pump with double row timing chain custom modified VY sump to hold more oil with improved racing products baffle inside, it’s got a 102mm throttle body and over the radiator intake, custom catch can with 2 -

Peter Brock’s VN Commodore raced at Bathurst 1991. Has a log book and it’s in excellent condition. Chassis PE013 built by Larry Perkins. It ran between 1991 to 1999.

Selling Complete Running Racecar (Front Running Racecar in its category) The car has the following: - Ex V8 Commodore Cup - 6.0L L98 Carburated - T56 6 Speed Gearbox - Haltech VMS ECU - AIM Data Logger Dash - AP Racing Brakes (6 pott fronts and 4 pott rears) - Willwood Pedal Box (under dash) - 500RHP - Has won the Super TT over 2L Treaded Championship 2022 - 850cfm Brawler Carby - V8 Supercar front bar - GTSR Rear Spoiler - 1-7/8 Primary's to 4 into1 3inch collector - Cams approved roll ca

One of 2 x A9X’S used by Bob Morris to win the 1979 Australian Touring Car Championship (ATCC). Raced Bathurst 1000: 1977 and 1978. ATCC outright wins in 1978 and 1979. 3 owners from new, original cams logbook. Raced in period by multiple Le Mans 24Hr, Daytona 24hr, Spa 24Hr, Bathurst 1000, Indy 500 winners: DEREK BELL, DIETER QUESTER, JONNY RUTHERFORD, JANET GUTHRIE & of course; BOB MORRIS. Original, unrestored and magnificent. More pictures and information at: https://www.ecuriebowden.c

BMW e46 m3 Sports sedan, as raced in the national sports sedan championship finishing 3rd in the last 3 championship seasons. -Aerodynamically enhanced carbon fiber body work -SB2.2 nascar engine, individual throttle bodies, drive by wire -Paddle shifted holinger rd6s -Motec m150gprp with upgraded logging, c187 data logger, motec pdm, all the allowable creature comforts such as traction control. -Double wish bone front end with billet uprights, live axle 3 link rear with camber adjustment, Ohl

Holden Torana (LJ), Group Nc Log booked. 202 engine running 45mm triple webers and M21 Gearbox. 336 Detroit locker with fine spline axels, Koni Shocks, 4 spot Volvo front callipers, 4 link rear end watt’s linkage and Chrome Moly Cage. Car has been sitting in shed for 6 years, last raced at Bathurst 2018. Open to reasonable offers.

Holden LX Torana 4 Door Complete bare body Shell. All rust removed from body shell, new sills, A pillars, floor, boot, etc etc. Repair invoice available on request. All body deadener removed. Body has been stich welded. Wheel arches not done due was going fit race flairs. Body in bare metal and rust coated. Drivers door slight mark. Body ready for roll cage.