68 items with Roll Cage for sale

E30 M3 Replica (unfinished project) Straight, rust free donor shell Fibreglass M3 body kit (doors and bonnet Mike Shaw Fibreglass NZ. Wings, rear window frame, front bumper assembly, boot spoilers etc from Pesch Motorsport). Fire barriers installed between boot area and cabin. 95% complete, ready for paint or vinyl wrap Roll cage built by Brad Stacy Fabrications (builder of Aussie Invader cage), log booked with CAMS. 6 point national rally spec. Full build photos at: https://bradstacyfabric

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST

BMW 135I built for Bathurst 6hr, only 2 meeting old , finished 12th out right in 2022 . Car was built by David leny motor spot & helped by Barry graham. Car comes with spares we take to Bathurst, no money to spend and is ready for Bathurst 2025 . Car has Supashocks all round , new seat and belts Call chris for more info and photos.

400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

E46 M3 track car. Used for hill climb, super sprint, time attack (only ever single timed laps rather than multiple laps run at speed). As such it has probably done less time at competitive speed than other race cars do in one meeting (I can provide further details of this on request). The arrival of a family, a house with a big garden to maintain and some family health issues mean I just don’t have the time to commit to it anymore. Car has never been crashed and is still road registrable (obvi

Well sorted,highly competitive Group NC HTC.nothing to spend.comprehensive spare parts package.six sets of wheels 13x6 and 13x7.5 speed gertrag gearbox and tailshaft to change car to five speed.spare close ratio four speed gearbox,spare panels,radiator,two lsd differentials 4:4 4:8..list parts available on request. .

Brand new 383 Chev Roller engine Hillborn injection, powerglide. MSD ignition, 35 spline maxispool diff 4.33 diff gears, Harrop alloy diff carrier, deadenbear delaybox, chute, Convo Pro rims, the list goes on. Ground up build, bare metal respray, this car is a true steel body car with everything done and ready for its debut run down the 1/4mile. Receipts for engine and work total well over asking price. Further details contact Chris on 0409348441.

For Sale – 2014 Lotus Exige V6 350S, highly modified. This was a no-expense-spared build using the best of the best and would make an amazing weekend cruiser, track day weapon or even Production Sports race car. Previously road registered with only 14,000 original road kms, and now with a conservative E85 Tune is running around 450hp, this V6 Exige will would destroy many cars 5 times the price. Well over $150,000 spent on modifications. Features of this car include • Freshly built forged engine

$28,500 negotiable, contact me to discuss. This car has been campaigned and developed in the Queensland Touring Car Championship over the last couple of years, it has placed second in category B and is a rapid, reliable and well developed car. It has lap times posted of 58.9s at Lakeside, 86.1s at Morgan Park and 84.1 at Queensland Raceway. These times were set on budget Zeknova slicks and we think there is a bit more time in it. Ideal for someone looking to race this year in QTCC, Replica

Hi Guys, Selling my R33 GTR as shown. This car is very well equipped and absolutely solid. Was formally used many moons ago as a Targa Tasmania entrant and as such could easily be used for this again. I purchased the car as a road going/registered car and used it as such for a year, then inevitably the itch got the better of me. I re-installed the cage, seats, and other items, lowered her back down again started using her for occasional sprints and time attacks etc Its never been used door to do

2016 BMW M3 build by and purchased from Bruce Lynton Service team prior to 2022 Bathurst 6hour which was this cars first race and placed 4th in class. It has also won the 2022 Australian Production Car Championship. The car has been built and serviced with no expense spared and constantly developed to be a very competitive and reliable package as proven by its race results. Car Qualified on the front row for 2023 Bathurst 6hr and finished P2 only 2.7 seconds behind the winner. Car is fully pre

I have for sale my BMW M4 3E Production Race Car (No longer includes Bathurst Entry) Many wins and 3rd in 2023 Bathurst 6HR, only 4 seconds off the winner after 6 hrs of racing. This car is very competitive and a must-have if you want a chance to win the Bathurst 6HR or want to run NSW/QLD State Series or APC. Years of development work and more money than I can remember creating a very reliable race car. Strict maintenance records and race data can be provided. The car can be sold as is or as a

Clubman Locost (Lotus 7). Well known on Victorian Hillclimb circuit, Finishing top 10 in many events over 8 years current leader car to chase. 5 Victorian titles with this car. car is serviced after every round / oil change penrite racing 5 Specs - Well built Blacktop 4age wide rev range, great torque and kilowatts haltec 4 ls ignition coils Kelford cam's Teflon coated Hi comp Pistons Forged rods Ported head velocity stacks 100mm Chrome moly Flywheel Exedy Clutch and pressure plate T50 ge

Built by "KirksWorks" Race Service in 2023 for Queensland and Australian Production Cars (QPC/APC). M2C was built for myself with top quality parts and labour. A regretful sale as i would like to participate in National GT4 Championship 2024 so i need it gone and get an GT4 spec car (M4GT4). If I won't sell it for that price I'll do a APC/QPC in 2024 season. - Had it since new and serviced every 4000-5000km. Currently 50K on the clock. - Full race car build can be found on Instagram - vodkaa_r

bmw e21 2 door coupe 3/4 chassis chrome moly 12 point role cage commodore twin piston brakes 9" nodule iron strange 4:11.1 gears 35spline axels autometer gauges mc Donald bros ladder bar rear end art carr gated shifter tailshaft to suit t400 transmission cooler under car fuel system suit twin carburetor e85 msd 6al2 Wildwood brake master braided lines wheel tubs suit 31.5 14" tires alloy front runners painted in flat black. had blown big block chev and t400 Moving and can't take it with me.