42 items in Australia for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
10
Roll Cage
For Sale 1969 Boss 302 Mustang built for Group Nc. Completed in 2019, done less than 10 laps of Baskerville Raceway and less than 10 laps of Symonds Plains Raceway, then stored, as new. Built utilizing numerous Kar Kraft blueprints from the original Ford Trans Am Boss 302’s where possible. Painted in correct 1969 Shelby Trans Am Boss 302 Blue with other period styling cues from the Shelby, Bud Moore and Allan Moffat cars. Built with all top shelf mechanicals throughout. Savy Motorsport Boss 302
20
Roll CageLog Book
Expressions of interest ... After much deliberating, I’ve decided to sell my “ Group C “ RX7 This is the real deal and comes with some incredible documented history inc - First time on the market in over 30 Yrs - One of approx 25 “SE” RX7’s bought into the country by Mazda - One of the first RX7’s to race in the 1979 Bathurst Hardie-Ferodo 1000 - Competed in the 80 & 81 Bathurst race as well - One of the very first RX7’s that Mofatt actually raced ( Oran Pk ) 4/5/1980 - Cams log book inc
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
42
Roll Cage
Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh
10
Honda DC5 integra, build for endurance races, new windscreen, lightweight lithium battery, Rep MUGEN front bar, CL9 K24 with 5 speed manual with 4.7 final drive, New drive belt, FD2 flywheel, new EXCEDY sport clutch, WALBRO 255L fuel pump, DC5R injectors, spring valves, new timing chain, tensioner, tensioner guides, new chain guide, FD2 CTR oil pump, DC5R 50 VTC cam gear, JUN AUTO rep oil baffle sump, FN2 oil pan, HONDATA ECU, new PLM 4-1 header with 75mm custom exhaust, SKUNK2 intake manifold,
9
Roll CageLog Book
Honda Integra 1998 type R Honda Integra supercharged. built by BYP racing with every intention to be a front running car. Built to mirror their winning white integra but with a few more extra bells and whistles. Motec dash- Hondata ecu Electric powersteering to much to list... Any inquiries or questions please don’t hesitate call or txt BYP Racing Built K24 Engine Long Block K24 Block Core and K24A3 crank BYP CSS Block Prep Cylinder Support and O Ring Manley H Beam K24 Forged
8 1
RegisteredRoll CageLog Book
Need to sell - already bought another toy! 70,000kms - 2ZZ Engine (NA) Currently full rego in TAS (was a repairable write off but has been cleared and has full rego - have pics of damage/repairs from previous owner). Ex-Exige Cup race car with full cage, CAMS logbook etc. Ohlins shocks Bigger front brakes Spent 3k on new Extractors and exhaust New hollinger 3rd/4th gear upgrade. Fully serviced recently (all fluids) and wheel aligned. Super reliable cheap fun that can hassle much faster cars a
14
Registered
1999 Honda Civic EK GLI, with K20Z1 out of a (DC5 Type S) - The Ultimate Street/Track Civic in Immaculate Condition - Proper build with all quality parts - The entire build is only approx 350km old - All parts purchased brand new - Looked after, Built & tuned by BYP - K20Z1 Registered to the car - Currently tuned to a 147kw at the wheels. No corners cut during the build from paint/panel done by Mesiti Bodyworks to all the mechanical by BYP. The intention of the build was to have a high-qualit
95
Registered
“We stopped counting at 4,000 hours.” As far as modified Mustangs go, this would have to be one of the absolute best in the country, if not on an international level. A labour of love built by the team at Stevens and Brennan Automotive, the plate in the engine bay says it all: heart, body and soul. This really is a very special car. Fully engineered and NSW-registered, the 1968 model Ford Mustang runs a supercharged 5.0L Windsor engine with GT40 heads (the engine is the same specification as
12
Roll CageLog Book
Group Nb mustang Tilley front end with brakes 2x gearbox’s 9inch 3 sets of wheels Spare bonnet Lots of spares, sway bars, springs etc Log booked Selling minus engine, brought to put on the track and times have changed, was previously raced by Troy Williams
2
Roll CageLog Book
Ford Mustang 1964 Historic Touring Car Vintage Racing Services Engine RHS Heads Boss Block etc. Reliable and a winning NB Car $98,000.00
7
Roll CageLog Book
Genuine Group A Ford Mustang (Fox Body). Ex Kevin Clark. Ready for restoration. Could also be restored to 1989 Historic Sports Sedan as it has both log books from the period. Shell and roll cage is freshly painted in light blue (Group A colour) ready for assembly. Comes with virgin 302 long engine with correct inlet manifold and heads. New pistons, crank, rods, rings and bearings ready for assembly. 8 1/2" Mustang diff installed along with some suspension. AP 6 pot brake rotors. New set of alloy
5 1
Roll Cage
Honda EG civic hatch race car, Built towards time attack and circuit races. Currently the fastest FWD car in W.A - Barbagallo raceway (58sec) and Collie raceway (1.11sec) with plenty more in it. Sleeved and built k24 motor making 580hp (only ran for 4 events and just had a check over with new fluids) Quaife Sequential gearbox (new) Elite racing baffled sump KAZZ 1.5 way diff DBW throttle setup traction control launch control MCA Red coilovers with custom spring rates with spare springs, New S
10
Roll CageLog Book
Immaculate Lotus for sale. This car is a Multi trophy winner on Circuit, Street Sprints and Hill Climbs. This car is part of Australia Motor Racing History. There is no doubt this car will be a future classic and a great investment, as this model is no longer being built. Introduced into Australia in 2004, for the premier single make race series for MoPro Australia, the Kumho tyres Lotus challenge. This series supported the V8 supercars at Bathurst. Fitted with CAMS certified roll cage and has
16
Registered
Hi, for sale is my EK1 Civic with EK4 facelift. I don't particularly want to sell it, but having 3 projects cars and renovations on the go at the same time something has to give. Pros: - Overall it's a great little car and has been modified to be either a fun street car or to be competitive on the track. - Has all the fruit you could want. Everything is done, just get in and drive. - Qualifies for Vic historic registration next year. - Engine is registered to the chassis. Cons: - It's a 25 ye
15
RegisteredRoll Cage
Amazing 1.9ltr DC2 - Motec M1, Dart block, Golden Eagle crank and Rods, Wiseco pistons. Built for boost... and to be a reliable track engine.. currently turned NA.. Toda headers.. Built by JHH - see image of JHH stamped engine. All Ferrea heads components , over sized valves, 1000cc Injection Dynamic injectors ATS Carbon clutch ATS LSD Skunk cams Spoon brakes Tein Super racing coil overs, with external reservoirs Cusco sway bars All bushes changed with Hard Race bushes. Unfortunately only s
9
Registered
CALLING ALL HONDA GEARHEADS! 1994 HONDA CIVIC EG, GLI HATCHBACK MANUAL 5th Generation JDM Civic 267,000 km Car is in original stock condition No modifications A TIMELESS CLASSIC Own a piece of Japanese automotive history! Known for their well-designed and engineered components. The engines, transmission and other vital parts are built to last! Honda has a reputation for high-quality manufacturing processes. The parts used in a Civic are of good quality and assembled with care. Known for
20
Registered
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to
27
RegisteredRoll Cage
1 Owner 49,**** Kms Race Red 6 Speed Manual Herrod Performance - Compliance Pack 670HP @ the Flywheel (minimum) Roush/Ford Racing R2300 2.3L TVS Supercharger Large Air-to-Water Intercooler System Oversized, Full-Face Low Temperature Heat Exchanger Degas Bottle High-Flow Rate Fuel Injectors Custom Aluminum Fuel Rail Formed Molded Hoses Twin 60mm Throttle Body with Matching Spacer Custom Cold Air Induction System Washable, High-Flow Dry Air Filter Heavy-Duty, First Sheave FEAD System Roush/Ford R
9
Roll CageLog Book
Motorsport Australia Historic log booked group N Mach 1 Mustang Rotisserie restoration taken back to metal, retaining its original exterior paintwork, not a showpony but presents very well. All new mechanicals inc Dry sump Dart based 351 Windsor forged internals RHS heads built by Kanaris Engines 600+ HP, Haltech ECU, New TKX close ratio, 9” 3.89 Trutrack, 4 link rear end on fully adjustable coil overs all round. Motorsport hubs front on 2-peice hub and rotors, tubular upper and lower wishbones