17 Circuit Racing for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
11
Time has come to sell the reserve race car. Was purchased as a stat write off (fresh water damage - sunroof left open) 195k on the clock Heavy duty clutch BC coilovers Whiteline front and rear sway bars and link pins with rear braces Front strut brace Afm gauge Boost gauge Turbo back exhaust (has scrapes on mid pipe so minor exhaust leak) Invidia mufflers May have a tune on it but would suggest having your turner check. Car drives very nice. gearbox feels great. Engine sounds clean and ver
10
Roll Cage
Audi TT-RS 5 Cylinder Race Car - Rare Manual 6Spd -AGI Half Cage -Sparco Circuit Seat -Audi Active adjustable damper system - Exhaust and Tune making good HP - 2 Piece Rotors and Pads F/R - 6x Forged wheels with Semi Slicks - very good mechanically with lots of upgrades, Maintainance records - Comes with original Seats if wanted -Trailer Available for extra $ - Open to swap/ trades - Can assist with transport and finance
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear with surge tank runn
10
track car all wheel drive built for pheasant deputy 4 hr series aasa log book 2 sets of wheels radio intercom new clutch fitted new timing belt race brake pads cheap track car also suitable for production car racing
8
2004 Subaru Forester This was our shops hill climb/super sprint project but due to our current racing we are short on time to finish. Car is running, driving and operates fully. Interior stripped, racing seat and harnesses fitted, harness bar Fuel surge system installed BC Racing coil over kit installed 4/2 pot brake WRX calliper kit with associated bracketry to install supplied, modifications have been carried out to fit the kit, just needs instillation. 17 inch WRX light weight wheels wit
2
Roll CageLog Book
Ford Mustang 1964 Historic Touring Car Vintage Racing Services Engine RHS Heads Boss Block etc. Reliable and a winning NB Car $98,000.00
7
Roll CageLog Book
Genuine Group A Ford Mustang (Fox Body). Ex Kevin Clark. Ready for restoration. Could also be restored to 1989 Historic Sports Sedan as it has both log books from the period. Shell and roll cage is freshly painted in light blue (Group A colour) ready for assembly. Comes with virgin 302 long engine with correct inlet manifold and heads. New pistons, crank, rods, rings and bearings ready for assembly. 8 1/2" Mustang diff installed along with some suspension. AP 6 pot brake rotors. New set of alloy
6
Roll Cage
Mexican Road racer, originally constructed by Shelby de Mexico. Last raced Mexico 2019. New race prepped 289 with zero hours, Rotec 4 speed, 9" tru-track, custom extractors, fire protection, Custom Radiator, Bond Roll Cage Twin MSD and Coils, Hydraulic Hand Brake, Collapsible steering Colum with detachable steering wheel, window nets, race seats/harness's, Lexan side and rear windows, Bilstein shocks, long range fuel cell.
10
Roll Cage
THE 2023 DEPUTY 4 hr ENDURANCE CHAMPIONSHIP WINNING SUBARU IMPEZA IS UP FOR GRABS. UNMODIFIED FROM ITS WIN. Round 1 .1st place Round 2 .1st place Round 3 .3rd place Round 4 .2nd place Round 5 .1 st place Round 6 .14th place Round 7 .2nd place Round 8 .3rd place BUILT TO RUN SPECIFICALLY AT PHESANT WOOD CIRCUIT IN THE DEPUTY 4 hr enduros .. IT ALSO TOOK OUT THE 2023 SUMMER SERIES Round 1. 3x1st and a 2nd place. Round 2. 2x 1st and 2 x 2nd place. Round 3. 4 x 1st places. The car has proven re
10
Roll CageLog Book
64 1/2 Ford Mustang historic touring car. Raced by Harry Bargwanna Well sorted and successful front running race car. Newly built 289 motor ( not raced ). Boss block, RHS heads, New Callies steel crank. Top loader gearbox. 9 inch diff with spool. Floated rear end. Spares. 12 wheels, top loader gearbox , 3.55 9 inch diff, distributor, starter motor, front calipers, front discs , front stub axles. Car located Engadine NSW.
9
Roll CageLog Book
New IAG block with Cosworth heads PPG sequential gearbox, freshly rebuilt PWR Radiator 350mm x 700mm PWR Intercooler 350mm x 700mm Motec ECU Motec Camera DCCD pro diff controller Cusco Coilovers AP racing brakes OMP drivers seat Heated windscreen Perspex windows, sides and rear All custom subframes and front control arms 3 sets of wheels with a new set of soft Michelin Slicks Carbon front bar, bonnet, boot and wing Originally built for sports sedans but lately it's been used for time attack eve
8
Roll CageLog Book
Audi RS3 LMS TCR Chassis #144 - Highest Spec Audi of this model in Australia (4 in the country) - Sold new to Australia in 2019 - Previously driven by Garth Tander and JK Vernay (2019 QR Pole & Race win) - Every homologation update installed including Aero front bonnet catches, front, rear & side plastic windows (only Gen1 in Aus with these updates) - Ohlins Shock Absorbers installed, tuned and recently serviced by AD Racing Shocks ($25,000 new price, plus custom valving) - Multiple podiums in 2
5
Roll CageLog Book
This vehicle is arguably the #1 Hillclimb Subaru in Australia. Winning 3 Australian Hillclimb Titles, 3 NSW Hillclimb Titles, 2 Qld Hillclimb titles and numerous club Hillclimb championships. Additionally the vehicle came 2nd outright for the 2021/22 Whiteline Tarmac Rallysprint Series. Vehicle built by Blake Engineering, is a 2006 Subaru Impreza WRX. Runnings a 450kwatw Deshelle built engine, currently tuned @ 341kw with bucket load of torque. EFR 7163 turbo, Haltech Elite ECU, wideband and das
20
Ford Mustang 9/2018 GT 5.0 V8. 6 Speed. Magneride Air Conditioned. Currently tuned on E85. American Racing Headers and Full Borla Exhaust, Carbon Fibre Driveshaft, Recaros, Upgraded to GT350R brakes. Tyres are Michelin Cup 2 285/30/20 on Front and Michelin Cup 2 r on rear 305/30/20. Half roll Cage approved and registered with CAMS. Vbox lite video recording device. Full set of brand new Michelin PS4. GT500 front and bonnet. Steeda front camber plates and rear camber arms. Full Ford Performance t
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.
1
Road registered club car, just completed. This car was my daily driver up till 2012 when it was put into storage. Interior has been semi stripped (parts kept), motor rebuilt, new clutch, MCA suspension, belts, almost standard just made better.
7
Touring Car Masters 1964 Ford Mustang. Very fast well sorted car. Car has high horsepower 302 Windsor, has just been freshened up, car has had a full respray. GSR racing gearbox, Tilton reverse mount bellhousing, Tilton carbon clutch, Dailey billet sump and oil pump, race products diff assembly with ball drive axles.