18 items with Roll Cage for sale
Most Recent
Most Recent
Keyword
Price
All Results
15
Roll Cage
Genuine 12/02 Subaru WRX STI, Australian Delivered STI, Brembo Brakes, AGI Roll Cage, Sparco Seat, I purchased my STI 7 years ago to use as a track day car, the engine had been modified and dynoed at 300KW at the wheels running on E85, after my first run at Sandown the engine detonated, I had a genuine Subaru STI short engine fully rebuilt and I had a more mild tune put into the engine and running on 98 Octane, after racing many different vehicles over the last 40 years this is the most fun car
71
Roll CageLog Book
When the all-new Subaru BRZ was released in 2022, Australian motoring journalists were unanimous in their praise for the car in that it had taken all of the best elements of the original BRZ and made it even better. Specifically, they were highly complimentary of the car’s driveline, with an enlarged engine (from 2.0L to 2.4L), a tweaked six-speed manual transmission and a final drive ratio that was stretched to give it more legs. The end result? A more powerful and more dynamic package that del
8
Roll Cage
2013 Subaru BRZ Race Car Fresh build this year with minimal use and ready for National Racing / Track Days , fitted with new race seats and harnesses, National Spec race cage , window net , new fire extinguisher , 4 map Ecutek tune by 86 Shop , new race exhaust system, Goodridge braided lines , SME race headers , Ecutek licence , Engine oil cooler kit , battery isolator with custom switch panel , Short Diff 4.5 fitted and standard diff comes with car , E85 conversion and dyno tune by 86 Shop , c
7
Roll CageLog Book
IT ACTUALLY PAINS ME TO TYPE THIS Roller- MR ROTA NO ENGINE( everything that is bolted to it stays on engine, including headers , fuel reg, injectors, remote oil filter housing) ,CLUTCH,BOX - everything else stays . I have stolen tail light assemblies for new car but ill find some more from somewhere that will be in mint condition alloy radiator , spal thermo, electric water pump custom chromolly front crossmemer custom 10l fuel tank in engine bay with holley fuel pump microtech LT16 ,7 inc
10
Roll Cage
Setup for track day, speed events Has run at Wanneroo ,Collie and Targa sprint events Brown Davis Roll Bar Saas seat New fire extinguisher Adjustable shocks Twin cooling fans and new aluminium undertray Soft top with rear glass window Comes with another set of race wheels, spare bonnet car cover and other bits 1600cc 5sp. A reliable, fun and easy package to operate $7000
10
Roll CageLog Book
The vehicle is ready to race we have been competing in Improved production racing but have only taken out on track a few times due to circumstances we have decided to sell the vehicle. -The engine is only two races old -The Turbo and Intercooler have been up graded -6Pod brakes at front & 8 Pod brakes at the rear -3 Way adjustable suspension -Has been Dyno tunes with restrictor for improved production racing Loads of fun to drive around the track it's set up and ready to go.
9
RegisteredRoll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo
5
Roll CageLog Book
V8 SuperUte for sale. Cars in great condition, few new things over the season break. - rebuilt engine by wall speed. Brand new heads, locked and sealed within series restriction - new diff centre - Brand new clutch - New axles Cars all fresh and ready for the season ahead. Only selling due to financial reasons. Will come with a list of spares such as new radiator, up rights etc. More then happy to get you into contact with the team at SuperUtes to sort you out in getting started. Pl
10
Roll Cage
Rx8 with a honda k24a3 engine and tremec tr6060 gearbox. -honda k24a3 engine, bc double valve springs and retainers, 40 degree intake cam gear, k20 type r oil pump kit -custom engine mounts, gearbox cross member and diff mounts -custom steam pipe manifold, aeroflow gtx3071r turbo, 44mm wastgate, full 3 inch stainless exhaust -custom intake manifold, intercooler piping, catch can and other extensive fabrication -600x300 intercooler, alloy radiator, oil cooler -surge tank, walbro 460lph fuel pump
7
Roll Cage
For Sale, 1999 Nb Mx5. Sprints, Track Days, Hill Climbs, Motokahana, Time Attack Build ready to race. This car was built for doing Sprints and Hill climbs so any form of Track days and so on this car is built ready to go. Due to where we live there is no "close" Track so like all good ideas its just feesable to own up here any more. Our loss is your gain. 1999 NB Mazda Mx5 Short version of the build Supercharged 1.8l 4cyl Haltech Elite 1500 Haltech IC7 Dash Tuned on E85 Bigger Throttle Bo
8
Roll CageLog Book
Price reduced. 1996 Mallock Mk32B Supersports Nissan SR20 Turbo engine with FT200 Hewland transaxle. PI dash with Autronic computer Imported from UK new, build 3 of 9 cars. CAMS log book issued 1998. Full carbon fibre body work. Bodywork moulds included for front and rear, and front splitter section. 3x sets of ENKEI one piece centre lock wheels. 4pot AP brakes front and rear KONI Adjustable shocks Injectors cleaned and serviced. 2x new Fuel Pumps, 1x Prime, 1x Main 2x new batteries Car
23
Roll CageLog Book
This Minetti has been a total rebuild of electrical with all Haltech equipment. This includes IC7 Display Dash, 2500 Elite ECU, 02 Wide Band Sensor, HPI4 Power Ignitor. The engine is a Gen 2 -1340cc Suzuki Hayabusa with 8 injectors and has the low profile sump with a 360 degree swivel pick up. The body is a new 1 piece lightweight version. Other equipment includes, new 6 point harness, MCA fully adjustable shockies front and rear, new Avon tyres only 2 meetings old, Dyna jet quick shift for flat
4 1
Roll Cage
400HP atw GC8 WRX - July 2000 Freshly detailed and polished. Car has just been finished. Has fresh front wheel bearings and will replace rear ones before sold. Mechanic owner. Engine EJ207 99-00 Heads Kelford 272 cams Billet cam seals Fuji Racing Billet breathers Springs, retainers and 1mm over sized valves ARP head studs GTPS02-712 Turbo External GFB gate and GIR up pipe Gate blended back into the dump pipe Nuke catch can ID1050x Injectors Top feed rails GFB FPR -8 Fuel lines and fitting
8 1
RegisteredRoll CageLog Book
Have my eye on another car so this one has to go. Been in development since 2017. Has raced in Targa West twice, Targa South west, Rallysprints, Racewars, Time attack and now Circuit racing.Full tech details in pics. Have all the parts to switch it back to Tarmac rally specs plus a comprehensive spares package including another set of wheels, diffs, gearboxs, drive shafts etc.. Has done a 61.04 at Carco.com raceway and has won multiple street car rounds at Collie and Wanneroo. Fastest rotary at
27
Roll CageLog Book
NSW and Australian Super sprint Championship winning vehicle, multiple times. Only selling due to moving interstate and downsizing property and ability to store and maintain multiple vehicles. Ok here we go. Bond Roll Bars weld in cage with roof cross bars, Carbon Fiber Hard Top, Garrett 2870 High Mount Turbo system with Haltech Engine management system, 165kws at the wheels on the Dyno at only 13 pounds Boost. Engine and Gearbox and clutch in great condition. Locked differential, New exhaust s
3
Roll Cage
RX8 drift/track car project I have since given up on due to work commitments and a lack of time. I'd rather avoid parting it out. Includes: S1 RX8 chassis (stat write off, perfectly straight, no damage or rust that I've found). - cut out OEM driver seat mounting to fit race seat lower (havent patched hole yet). Custom shortened front uprights New LCAs New brake rotors New PMU pads New braided front lines New Custom valved coilovers New wheel bearings/hubs Wet NOS kit (10lb bottle) Other rando
7
Roll Cage
Up for sale is my 13b turbo bridgeport rx7 that is track or race ready. Spent over 140k currently running on e85 with the wolgborner efi turbo has a full weld in cage. Endless brakes
9
Roll CageLog Book
Mazda in excellent condition, recent service, garaged, Mazda BP GTR Motor with factory Ihi ball bearing Turbo, 221 KW @ rear wheels s/5 gearbox, new h/d tailshaft triple plate tilton, alloy flywheel 4.11 detroit locker.S/4 breaks all round ht 10 pads new front koni struts, harness, autometer gauges intercooler spray 48’s. CAMS log book. ID plates and could be registered if changed to roadworthy.