92 items in Australia for sale

This is a re-bodied Lotus with original Lotus identification plates. The car has had an extensive rebuild with every part checked and/or replaced. BODY The body is painted in genuine Lotus colours and has alloy boot, bonnet and doors. Spare steel doors are included which are painted. The interior and underside have also been painted. The rear A arm mounting points have all been strengthened. A substantial steel roll cage picks up major mounting points and has side protection bars. ENGINE The e

1040kg. @555rwhp at 18 psi This is your opportunity to buy a very well sorted Unique Time Attack package. -Recent refresh all brake calipers, brake master, new clutch slave and clutch master. -New windscreen. -All Carbon body repaired and coated in 2 pack clear. -Roof and rear bar new Matt black Avery wrap. -Microtech LT16 modified for flat shifting. -Motec CDL3 data logging dash -Lots of sensors -Oil pressure/temp -Fuel pressure -Water temp -Air intake -Afr -Seperate egts microte

Radical SR10 Is race ready with the following options: Billet upright upgrade Pre-preg carbon-fibre double front dive planes Air jack system Tyre pressure and temperature monitoring system Dry-break refuelling system Advanced dynamic laser ride height (front and rear) logging Suspension logging sensors Electronic Power Assisted Steering (EPAS) Driver & passenger seat insert 425hp and 725kg. Genuine enquires only. Based at Jam Motorsport @ The Bend Motorsport Park. Jam Motorsport storage, sup

Mustang Group NC Been a race car most of its life Previously raced in another class but I have been accumulating parts to run in Group NC including Marty White built NC legal 351 Windsor with quad 48 Webber's plus a brand new Super Victor if Webber's are not wanted Close ratio top loader with rose jointed shifter 9 inch true track New Group N legal brakes front and rear Koni shocks set up by Glenn Seton Original rear seat in immaculate condition Original dash etc plus brand new dash pad

Open to genuine offer 1500hp Project ford falcon xy 461 Windsor full restoration f2 pro charger custom everything this car owes me well over $300,000 everything is there to finish all that needs to be done is put back together Custom radiator with 2 16inch spal fans Dart block 9.5 4bolt mains Callie’s crank and rods,diamond pistons Victor Chapman sr heads ported And intake Custom cam F2 pro charger 3000hp w/a intercooler Fueltec ft600 Turbo 400 als race glides with Neil chance r

Expressions of interest ... After much deliberating, I’ve decided to sell my “ Group C “ RX7 This is the real deal and comes with some incredible documented history inc - First time on the market in over 30 Yrs - One of approx 25 “SE” RX7’s bought into the country by Mazda - One of the first RX7’s to race in the 1979 Bathurst Hardie-Ferodo 1000 - Competed in the 80 & 81 Bathurst race as well - One of the very first RX7’s that Mofatt actually raced ( Oran Pk ) 4/5/1980 - Cams log book inc

Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L

Aussie Racing Car 2004 model Ford Coupe completely rebuilt including new paint, brakes, tail shaft and seat, no major accidents, spares to build another engine, purpose built tilt trailer with winch. Sydney NSW Log book $16K including the registered trailer Contact Georgina Wilson 0478 666 952 Lynton Wettone 0414 501 185

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh

IT ACTUALLY PAINS ME TO TYPE THIS Roller- MR ROTA NO ENGINE( everything that is bolted to it stays on engine, including headers , fuel reg, injectors, remote oil filter housing) ,CLUTCH,BOX - everything else stays . I have stolen tail light assemblies for new car but ill find some more from somewhere that will be in mint condition alloy radiator , spal thermo, electric water pump custom chromolly front crossmemer custom 10l fuel tank in engine bay with holley fuel pump microtech LT16 ,7 inc

Near completed rolling shell Ford XR8 Replica tourer. National spec cage with MA certification. Period correct full containment newly covered recaro seat. Supercar body kit and lexan windows. XYZ coilovers all round. Rear bulkhead completed, fresh 2k paint job and fully painted interior nardo grey 2k paint. Custom seat mounts. Lightened doors and new door cards. 6 pot mustang brembo front calipers, XR8 rear calipers. Genuine XR8. Brand new DBA 4000 t3 front rotors. Strengthened rear di

New Coyote 5.0L engine - 2 race meetings old Gearbox Reconditioned Light-weight / quick release boot lid Carbon roof turret Full function display Spark steering wheel Solid prop Shaft w/sleeved journals FIA onboard efficiency Cooling System PWR Hi Efficiency Cooling System Motec M150 ECU with 250 mb logging Ramp and Clutch type Limited Slip Differential (LSD) TIlton 3-Plate Sintered Clutch, Master Cylinder's and Pedal Box GPS vehicle speed system 9 Position Throttle mapping Pit Lane Speed Limi

This is a unique piece of V8 Supercar and Dick Johnson Racing history and has only had two owners after its time at DJR. Originally built as an AU model Ford Falcon V8 Supercar, this car (chassis DJR AU12) was converted to BA bodywork by DJR and became a part of the Bowden Collection of cars before being purchased by its current Queensland-based owner in 2014. Raced by Paul Radisich in Shell Helix colours for DJR as the #18 Falcon during the 2001 (winner of the Perth round of the championship)

Ford BA race ute (used in the Queensland production Ute series) Has come either 2nd or 3rd in championship in each year it’s competed - [ ] BF 6 cylinder gas motor , billet oil gears and tune (1-2 seasons old) - [ ] 6 speed gear box with rip shifter (4 races old) - [ ] Custom single piece tail shaft (4 races old) - [ ] Locked diff - [ ] Qld production ute series brake package - [ ] Quick release steering wheel - [ ] Scott’s rods cage (national spec not just local requirements) - [ ] Push butt