SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

54 items for sale

Refine Search

Clear All
Keyword
Category
28
12
5
3
6
Price
Minimum
Maximum
Listing Type

Featured ads

All Results

3
Roll Cage
Fully Updated Massive spares package (including spare engine and transmission)

California, USA
Share
Watch
31
Roll Cage
Log Book
This race car was build number 55 of 150 built by Long Road Racing in the USA for Mazda's Global Cup series. Eligible to race in Sports Production in Australia. Very low hours . Car comes with A.I.M dash CAMS approved/ complied roll cage Race and delivery ECU's LifeLine fire and safety system 12 x near new race tyres + 4 race rims eight brand new wet tyres on race rims Transponder Gearbox and differential oil coolers Complete LRR user guide and associated manufacturers instruction manua

Brookfield QLD, Australia
Share
Watch
14
Was $76,500$57,950
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Bendigo Victoria, Australia
Share
Watch
10
Registered
Mazda MX5 2009 NC2. Great daily driver and weekend track car. Extensive modifications as follows: FD RX7 wheels & Bridgestone RE003 tyres - Yellow dot sway bars - Yellow speed endinks - Silvers coil overs - Racing Beat headers - GWR mid-pipe - Ecutek tune with autoblip, launch control etc - Autoexe cold air intake - 4.1 lsd - T3 rotors with braided lines and carbon tech pads - Guardians design steering wheel - Fire extinguisher - Stubby antenna - Kenwood headunit with Apple CarPlay - RX8

The Gap QLD, Australia
Share
Watch
19
Registered
This 500HP Midnight Purple 3 R34 is not a car you can just go out and buy in this condition. I recently won this car through a raffle with Vincere Australia, who bought the car off of a woman who did the majority of the modifications. The paintwork, the body kit, the extensive modifications to reach 500HP reliably AND legally, really proves that this car was loved and cared for before I owned it. I have a tracked down a full history of the car in Australia; when it was imported, who owned it,

Woolloongabba QLD, Australia
Share
Watch
20
Registered
1984 DR30 Skyline RS-X FJ20 Turbo Intercooled As seen in the photos this car presents incredibly well for its age. Mechanically everything is as good as can be. All suspension bushes have been replaced throughout the car except for the rear subframe as they weren’t available. New front lower ball joints fitted. New KYB front and rear shocks. New front slotted disc rotors. All electric windows work. Factory central locking. Original Japanese radio with cassette player. Some seat panels have been

Onkaparinga Hills SA, Australia
Share
Watch
15 1
Registered
Roll Cage
Working interstate for the foreseeable, so going to move the GTR on. This GTR has a well-documented track use life, however was given an engine out birthday just recently and hasn’t been tracked since as I have been over east, so if you wanted to tidy it up into a Streeter the engine hasn’t been tracked as yet. Built & Tuned by Rob Turner Currently sitting at 600kw @ 29psi / 550kw @ 22 psi Engine N1 Block HKS Step 2 2.8 Stroker RAMS CNC shimless Head with Kelford 182 c 272 cams, Kelford

Cockburn, WA, Australia
Share
Watch
10
Roll Cage
Setup for track day, speed events Has run at Wanneroo ,Collie and Targa sprint events Brown Davis Roll Bar Saas seat New fire extinguisher Adjustable shocks Twin cooling fans and new aluminium undertray Soft top with rear glass window Comes with another set of race wheels, spare bonnet car cover and other bits 1600cc 5sp. A reliable, fun and easy package to operate $9900

Warwick WA, Australia
Share
Watch
6
1997 R33 GTR 16x,000 kms R35 coilpacks with Raceworks billet bracket HKS Coilovers Twin plate clutch Wedsport TC105 New S3 Front lip Oil filter re-location Ganador side mirrors Momo Monte Carlo wheel (will come with stock steering wheel) Based in Melbourne but happy to assist with transport

Reservoir VIC, Australia
Share
Watch
79
Registered
Now available for sale is what could easily be described as one of the best Mazda RX3 Coupes in the country. Every aspect of this car is day one original and honestly hard to believe. There is not a single modification on this car. Originally imported to New Zealand from Japan and then here to Australia approximately nine years ago and since being in Australia has only had two very careful owners. A full feature on the RX3 was published in issue 49 of Survivor Car Magazine. Running its original

Kogarah NSW, Australia
Share
Watch
5
Roll Cage
Log Book
400R Tribute Tarmac Rally car, successfully race history with multiple early modern first places and outright stage times achieved when last run at Great Tarmac Rally. The car has been continually developed since 2017 with external paint recently refreshed along with the following features. Racetec built 77.7 stroker to 2.8Ltr, N1 block, HKS step 2 forged crank, HKS forged rods and pistons, flex fuel, M130 ECU with motec C125 dash, new KOYA alloy radiator . Adl Turbo Service rebuilt Garrett GTX3

Adelaide SA, Australia
Share
Watch
12
Roll Cage
Log Book
Includes Cams Log Book RB 25 Fully Forged Motor Built by Nismo 700hp Holset Turbo 1200 cc injectors Running on E85 40 Litre foam filled tank 3 Ltr Surge tank 3 Fuel pumps Accu Sump 5 Litre capacity Hail tech dash Link G4 ECU Optic Fibre Wire throughout R33 Front Splinter Car weighing in at 1250kg 6 speed gearbox, Nissan 370Z 3 way button clutch Winmax Gold pads and air ducted Full set of tyres for drift or track, 8 in total Holinga Diff 4.3 Ratio BCC racing coil overs Full rose joints thru out U

Helensvale QLD, Australia
Share
Watch
227 1
Registered
When you think of iconic Japanese cars from the seventies, a number of makes and models immediately spring to mind. But if you had to nominate just one car that best represented design cues, styling and engineering from the era, it would have to be the Mazda RX-3 Coupe. When it was released here in 1972, the rotary-powered coupe was a legend-in-waiting and without question the car has well and truly achieved cult status amongst the Australian automotive community. This particular example has

Kogarah NSW, Australia
Share
Watch
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec

Caloundra West QLD, Australia
Share
Watch
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1

Mount Crosby QLD, Australia
Share
Watch
17 1
Registered
Decided to sell my Pulsar after much deliberation due to changing life circumstances. A ton of hours and money have been spent getting this car to where it is today, having bought the car completely stock in 2018, with all modifications completed under my ownership using top quality parts. It has been setup to maintain most of the comforts of a daily driver while being ready to take on any track day competitively, having recently had a very successful run around Mallala. Everyone that hops in

Aberfoyle Park SA, Australia
Share
Watch
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U

Narellan NSW, Australia
Share
Watch
10
Registered
R33 GTR 1996 (non Vspec) series 2 - midnight purple - 107,000 Kms (includes some shaken papers grade 4 import certificate) - No rust - Clean straight rails - Car just recently resprayed - Alcon big brake kit - Excedy twin plate clutch-nismo braided slave line kit) - Tein coil-overs - Factory optioned 320km cluster (rare) - Power FC D-Jetro - Turbo smart e boost-2 - Nismo LSD - Tomei 3” turbo dumps - HKS 3” front pipe - Trust PE Full titanium exhaust 3” - Apexi pod filter kit (factory air-b

Osborne Park WA, Australia
Share
Watch
10 1
Roll Cage
For Sale - Price reduced and is negotiable - Production Sports Car MX5 NB8A track day special. This naturally aspirated 1.8L DOHC engine has never let me down. This car was built by Automotive Plus, and due to its unique sound down the straight has been a head turner at SE Qld race tracks An extensive list of items are below: BC BR Coil overs - adjustable dampers, adjustable ride height BBS RG359 RG-F Wheels, 15x7 wrapped in Hancook Ventus C51, medium compound twin groove slicks. 205/50Z

Caboolture South QLD, Australia
Share
Watch
9
Registered
Roll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo

Sydney NSW, Australia
Share
Watch