SSR Enabled
my105 - No. 1 Race car classfieds
my105 - No. 1 Race car classfieds

197 items for sale

Refine Search

Clear All
Keyword
Category
65
62
1
70
1
21
6
Price
Minimum
Maximum

Featured ads

All Results

25
Roll Cage
Log Book
Ultra Rare 1998 Porsche Supercup, here is a chance to own a piece of Porsche Motorsport history, 1 of 29 Porsche factory built 996 Supercup’s built for the 1998 Supercup season, these were the first ever 996 factory built race cars by Porsche & were the prototype for Porsches water-cooled era. A truly unique factory built prototype race-car using a mix of 993 race components & newly developed 996 race components, a 993 GT2 gearbox is mated to a unique rod shift gear selector not seen in any othe

Melbourne VIC, Australia
Share
Watch
9
Roll Cage
Log Book
Mazda in excellent condition, recent service, garaged, Mazda BP GTR Motor with factory Ihi ball bearing Turbo, 221 KW @ rear wheels s/5 gearbox, new h/d tailshaft triple plate tilton, alloy flywheel 4.11 detroit locker.S/4 breaks all round ht 10 pads new front koni struts, harness, autometer gauges intercooler spray 48’s. CAMS log book. ID plates and could be registered if changed to roadworthy.

Adelaide SA, Australia
Share
Watch
6 1
Roll Cage
Log Book
For sale is the Dick Ward Go Gear sport sedan. As built and driven by Dick in sport sedan races in the 80s. This car presents in excellent condition. - 13b PP engine using MFR factory peripheral port housings and making 300hp. - Hewland transaxle stamped as ex F1 F.Williams. - full chromoly space frame chassis - magnesium uprights - lots of top spec features as raced in the day. - 600kg makes it an absolute blast to drive and extremely fast This car is eligible to run as invited in Historic

Camden NSW, Australia
Share
Watch
7
GKN ORIGINAL EQUIPMENT ( OEM ) Shafts - NEW. G-Force are the distributor for GKN Race Shafts in Australia and New Zealand. Porsche and AUDI driveshafts for ALL Porsche and AUDI Race Cars available. GKN supply the shafts for these cars to the manufacturer worldwide. # 991 red shafts, car set new; $5450.00 + gst. # 997.2 green shafts, car set new: $5295.00 + gst. # 996 / 997.1 blue shafts, car set new: $4995.00 + gst. Call for further info and availability.

Braeside Victoria, Australia
Share
Watch
4
This well maintained car has never had any major accidents and will suit many forms of racing. Gear box fully rebuilt ( 5 Hours), new clutch and flywheel ( 5 hours), engine recently leaked down and compression tested ( 5 hours), spare set of front brake pads, auto blipper, heated front screen, air lance, 3 sets of wheels including 1 race meet old wets, cool suit and helmet cooler ready, spare carbon fibre rear spoiler and front bar, other spares.

Melbourne Victoria, Australia
Share
Watch
5
Roll Cage
Log Book
Ready to race current spec APRA race proven winning car. Motor only 140 klms, 1 race meet old. SR20 Gearbox done 4 meetings. Controlled suspension 6 meetings CAMS National spec roll cage CAMS log booked ASSA log booked All the good gear at no expense spared on build and maintenance. Electric water pump Electric power steering Cold air box New clutch Remote oil filter Oil cooler Oil accumulator Brake booster delete Braided brake lines, brake bias to rear brakes. Nolthane bushes throughout. New i

Bathurst NSW, Australia
Share
Watch
5
Roll Cage
We changed the engine to a 968 then did the following works by a professional engine builder: 1. MID Darton Sleeves 2. JE Pistons 3. Dry Sump 4. Lightened rotating assembly 5. Carillo Rods 6. Race ported Heads 7. Race Cam & Custom Intake Manifold 8. 2 x Sparco Race seats 9. Hossier slick Race Tires 10. 1.7 kw Brosch Starter Motor

Port Macquarie NSW, Australia
Share
Watch
7
Registered
LHD ex American race car 4.5 V8 5/Speed fully recoed transaxle with LSD , new fuel pumps ,fuel distrlbutor and warm up sensor Fuch wheels ,new tyres race clutch ceramic brakes Sparco seats and belts 1/2 roll cage ,quick release steering wheel. On Club Plates $35000.

Empire Bay NSW, Australia
Share
Watch
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.

Springwood NSW, Australia
Share
Watch
10
1998 Nissan 180SX, Toyota V8 Price NZ$24,000 FOB Japan Call Matt In Japan 0081-70-3802-3006 or My NZ Number +64-22-0878238 , this vehicle is in Japan, it will be sold FOB, Free On Board, you have to pay the ocean freight, customs, GST, duty. The condition is good, apart from a few small dents, and the clear is fading in places. The engine is a bolt in swap, no cutting or welding, everything is bolted in. Spec : Engine 1uz-fe Documentation and export certificate Year Type=1998/ 9th Month Man

Tauranga, New Zealand
Share
Watch
1
Road registered club car, just completed. This car was my daily driver up till 2012 when it was put into storage. Interior has been semi stripped (parts kept), motor rebuilt, new clutch, MCA suspension, belts, almost standard just made better.

Arcadia NSW, Australia
Share
Watch
12
Porsche 911 996 Twin Turbo upgraded with Fabspeed exhaust and headers, Maxflow Air intake, Billet Alloy Diverter valves (Evo Racing), Hybrid Turbos (K24/18G Vivid Racing), GT2 Intercoolers, Computer Flash Tune, Quick Shift gear stick, Bilstein PSS9 Coil-over adjustable suspension, carbon fibre strut brace, GT3 6-piston fr brake calipers, GT3 Rear rotors (all brand new), Continental Conti Contact 6 as new road tyres on 19" rims plus Yokohama AO50M track tyres on Porsche Turbo 18" rims 90 per cent

Glen Iris VIC, Australia
Share
Watch
9
Gc8 wrx 2jz!!! Was a four door but had a wide body installed and rear doors deleted to fit the supra IRS in. 2jz conversion Built r154 5 speed All supra subframes and mostly a gc8 shell with everything supra underneath. All work on the car was done by top class automotive in Sydney! All fab work done by mongster fab in Sydney Brand new haltech elite ecu, look, and dash Just upholstery did the dash in alacantara and seats in alcantara blue diamond stitch. Tuned by pulse racing. Made 700hp th

Canungra QLD, Australia
Share
Watch
34
Personally imported from New Zealand, owned by an Engineer in Possum Bourne’s race team. Would be suited to Road, Race or Targa events. This won the open class at QLD Time Atrack in 2017. Full specs available via a pdf.

Eagle Farm QLD, Australia
Share
Watch
1
One owner from new 2006 Subaru sti wrx sti road/race/rally car! S and J billet engine with blouch dominator with no expense spent! 600hp atw road drive able car which can be taken to track or drag strip then driven home. more details upon enquiry.

Perth Western Australia, Australia
Share
Watch
16
For sale, new RX8 Cup race cars. ready to race in the RX8 Cup Series. very cheap way to race in a one make series with RX8 rotary cars. All built with new race parts ready to hit the track in a fast growing National series and CAMS state championship. cars are all the same spec.Fresh running gear. 2 cars to choose from, silver or yellow.

Sydney New South Wales, Australia
Share
Watch
5
Registered
This car has all RX8 Cup compliance parts which also makes it eligible for series production. It has MCA Suspension, Speedy Wheels, MOTORSPORT AUSTRALIA National Spec Cage & Logbook. This well sorted car and has been a proven performer in the RX8 Cup series. It has a low hours engine and freshly rebuild gearbox as well as all fresh fluids. The car also has Endurance style Belts, and an adjustable HTE seat. By simply adding a WING it is completely ready to compete in RX8 Cup. Or don't add a wing

Croydon Park New South Wales, Australia
Share
Watch