123 items in Australia for sale

1968 Camaro - Built by Alston race cars in USA. Build no. 3040. Full steel bodied and bumpers with wind up windows Three quarter tubed chassis car Fibreglass bonnet and boot Ran with 522ci nitros motor with 400 shot. Ran a 7.84 over the quarter Always runs straight MSD grid 8 New MT 32" tyres As a roller with MSD (everything less motor and trans) $85,000 With turbo 400 rated at 2000hp and Al's glide air shifter with two neutrals $95,000 Can include complete Big Duke heads, 800hp nitros kit wi

*2025 TGRA SCHOLARSHIP SERIES - ARRIVE & DRIVE PACKAGE* Apogee Motorsport is now offering arrive and drive packages for the 2025 Toyota 86 Scholarship Series. This is the perfect category for the young up and coming racers to cut their teeth or for the experienced driver looking to prove themselves and race in one of Australia's most competitive series'. The support package offered by Apogee Motorsport includes everything that you need to go racing; - Lease of a competitive Toyota 86 - Event

Toyota 86 Scholarship Series Race Car Very successful in the national Toyota Gazoo Racing Australia 86 Series, multiple pole positions and strong race results. Complete rebuild so car is ready to hit the track Engine dynod showing good results Completely new body and panels (mismatched panels can be wrapped if required) Includes 6 rims Multiple spare panels Spare control arms Other than AIM camera system and radios, car is ready to race. More than happy to come out on the first test day

Expressions of interest ... After much deliberating, I’ve decided to sell my “ Group C “ RX7 This is the real deal and comes with some incredible documented history inc - First time on the market in over 30 Yrs - One of approx 25 “SE” RX7’s bought into the country by Mazda - One of the first RX7’s to race in the 1979 Bathurst Hardie-Ferodo 1000 - Competed in the 80 & 81 Bathurst race as well - One of the very first RX7’s that Mofatt actually raced ( Oran Pk ) 4/5/1980 - Cams log book inc

Owner motivated to sell Blown 1959 Corvette Montana Bros, New York Chassis 427 CN billet cross bolted block with Alan Johnson heads, top end. Fresh motor with 6 passes. 14/71 Fowler Superman 44 amp MSD mag, coil etc Recent front half build with all new Rims & Tyres, Brakes & suspension Mencer rear shocks with data New 3 speed Lenco with Bruno and Chance Billet convertor. Fully rewired, new fire system, belts and chutes. Comes with basic spares, Pro jacks. I do have an 2nd identical engine,

Toyota 86 Specifications Build date 05/16 Vin JF 1ZN6K81GGO35975 Colour White Approved MOTOR SPORT AUSTRALIA AGI Roll cage approval no 71220 Tuned to E85 156.4 kW Racerom set up Lightened flywheel competition clutch New Ventas Hancook tyres 225 -40ZR-18 Wheels JAPAN JDM Concept Exhaust ARK 3 “Stainless Extractors ceramic coated Liverpool exh External Battery Isolator SPARCO Seats and Harnesses driver and passenger Car has been built up to AUSTRALIAN Motorsport standards, Has once only

Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L

As Raced by Bradi Owen in 2023 and Declan Frazer in 2019 this car was meticulously built in 2019 and has been maintained with no expense spared. Never been crashed or had any major repairs, Highly competitive car. Log booked, all seals etc, ready to go racing in the Toyota Gazoo Scholarship Series.

Mazda RX8 SP Tribute Tarmac Rally Car This car was built to take on Targa Tasmania in the Early Modern Category. Since then the car has been used in the Australian Tarmac Rallies, taking out the Championship in 2023 Early Modern. This car is so well setup it is easy to drive with constant power and no turbo lag. https://youtu.be/q99dUqYGv2E?si=7NuChYIdCvaxCnRx 13B REW Borg Warner EFR 83/74 with .92 Series 2 6 speed gearbox OMP Winged Seats 2 x 6 Point Harnesses 2 Stage Heated Front Windscreen

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

I am having to do a regretful sale of my beloved car. It is a near finished project dream car that I have been working on for the past 2 years. I bought it as a semi project car but was falsely advertised, so it became a big project that is nearly finished. I hope it goes to a caring car head or collector. The car is a classic car. No reg, no roadworthy incl. The KMs are approx. as I still use this car as my daily. INFO *JAPANESE IMPORT* 1993 Toyota Celica Convertible ST-183 3S-GE Engine Re

Toyota 86 K-Swap After many years of research and development, its time to move on to something new. Anyone who has developed a car knows how much work and rework it takes to develop something and this car is no exception. Key information below. Engine - K24A4 closed deck and fire ringed (fresh build < 25 hours). - Forged build (Skunk rods and wiseco pistons) - standard crank - race bearings. - Garrett G25-660 with water cooled wastegate. - K-power swap kit (engine mounts, intake manif

IT ACTUALLY PAINS ME TO TYPE THIS Roller- MR ROTA NO ENGINE( everything that is bolted to it stays on engine, including headers , fuel reg, injectors, remote oil filter housing) ,CLUTCH,BOX - everything else stays . I have stolen tail light assemblies for new car but ill find some more from somewhere that will be in mint condition alloy radiator , spal thermo, electric water pump custom chromolly front crossmemer custom 10l fuel tank in engine bay with holley fuel pump microtech LT16 ,7 inc