36 items for sale

First time offered for sale Bundaberg Rum's Ultimate Summer Wagon. Unwanted prize auctioned June 2003 with one lady owner to date. Genuine 25,000kms. One of three, 2 built for Mambo and one for Bundy Rum. Complied 7/02. VU, SS, Panel van. Black metallic paint, manual, 5.7L, V8, Petrol, EFI. Aircon, dual airbags, P/steer, P/wind front, ABS, IRS, LSD, FE2 suspension, Cruise control, Central locking, Pioneer head unit CD/DVD Player with subwoofers, Red leather trim, SS cold air induction kit, High

VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun

FOR SALE 2010 HOLDEN VE COMMODORE UTE SSV SET UP FOR STREET – TRACK CAR – DRAG RACE STREET REGISTERED WITH MOD PLATES QLD REGO 5-24 24500KM ENGINE 6.0 LITRE 495KW ON BACK WHEELS 1180 N.MT FORGE PISTONS ROD BOLTS CUSTOM CAM DOUBLE VALUE SPRING HARROP AIR INTAKE E85 INJECTORS E85 PUMP AND SURGE TANK 2300 HARROP SUPER CHARGER MANUAL 6 SPEED GTS S1 SEQUENTIAL SHIFTER CERAMIC CLUTCH WITH CUSTOM SLAVE CYLINDER 1000HP DRIVE SHAFT WITH 9” YOKE TRU TRACK DIFF CENTRE 4.11 GEARS 1000HP DRIVE SHAFT AXL

Predator Ute up for sale as seen in NZV8 magazine. Fully certified for road, current WOF and Rego. This Ute is a one off and built extremely well. Regular maintenance carried out since I have owned it from 2020. Genuine reason for sale. This Ute went from Moyes Holden and got fabricated. Ute runs cool and well. 720hp, 10lb boost, nitrous no longer hooked up (bottles still in Ute). YouTube video attached rom NAC Car Culture - Ute is on from running time 1-minute in the video. Engine- 400 Small

Statutory write off and fully repaired, We have photos of the damage which was the rear of the car,all receipts are available as well. Being a stat write off this vehicle can not be registered in Australia, can be used for track or export outside Australia. it is priced below our cost and needs to GO.

2012 Holden ve track ute cannot be registered. 5.7 LS1 vcm7 cam, ported heads, OTR cold air, trunuin upgrade, buckets, oil pump, timing chain, push rods, springs gaskets were all upgraded at same time was done about 1.5 year ago at KTMR performance. twin into single 3.5 exhaust sounds tuff,all braided oil lines, catch can, oil cooler, oil accumulator, powersteering cooler, coilovers, diff has a harrop full spool rated to handle 1000hp with 3.7 diff gears custom tailshaft (dount delete and bigg

VS SPAC LS1 AUTO. $25,000 Freshly finished and converted LS1 auto 4l60e. Top end rebuild on the engine, cam, heads shaved and rebuilt, new double row timing chain, oil pump, lifters and springs. New Manifold, radiator, rebuilt auto, 3000 dominator stall, new front and rear brakes and front shocks, new steering rack and new tailshaft. Brand new rod shop conversion kit and new exhaust. New fuel reg, lines and fittings. New in tank walbro pump, new manifold. New mini low mount A/C pump installed

Introducing Australia's newest form of motorsport. Yacar Cross Karts. Imported from Spain. Log booked as Formula Libre and ready to race. Available in asphalt or gravel setup. Ideal machine for Autocross, hillclimbs or circuit sprint events, these karts do it all. Specs include: Fully adjustable suspension 600cc Suzuki Engine Brembo Brakes Hydraulic Handbrake Large gear display Adjustable rake bias Get in touch if you would like some more information. Located in Melbourne, delivery availabl

PRICE REDUCED AGAIN! Calibra 117k 2.5 v6 man red this car would make a good hillclimber or trackday car has alcon 4p mono front calipers dba club spec t3 330mm rotors alcon advantage 320mm rear rotors 2p calipers arp wheel studs 5x120pcd eibach coils kyb eurospec shocks poly bushes front&rear 17/7 alloy wheels fed rsr 215/40/17&235/40/17 fed 595 rear. Have 3.2 v6 from 2004 vectra with cat cams pac v/springs arp head bolts new balancer mtec billet flywheel with arp studs crossram intake off 3.0l

Mike Davidson's dream was to capture the world record for the fastest twin-engine Flathead powered streamliner and began over 25 years ago when he and others put their heads together and the DLRA was born. The journey of building his own car began by hiring moulds for the body from Arivetts in the USA and when his body was ready had extensive wind tunnel testing performed at the RAAF Edinburgh base. The car can be entered into four different classes depending on how it is configured. In March 20

2000 vt v6 wanting to sell, for someone to use as a drag racing car, engine is still good, seats need to get change over, car windscreen got damaged by someone who vandalised it, and front passager window is broken, hence why I'm selling it to anyone needing a good car to modify for drag racing or doing donuts on the track. Unlicensed.

1967 HB Torana Roller for sale Complete roller ready for paint, selling minus the wheels. Built by Matt Marsh @ PSI in Wollongong over $60k in fab/body work, full perspex windows, 4 link 9” inch, tubbed, wheely bars, parachute and strange disc brakes. Diff Center is a Lenco aluminium 35 spline full spool All original tags, engine mounting plate to suit small block, box mounts setup for power glide. Fibreglass bonnet, boot and bumpers