64 Car, Bike or Kart with Roll Cage for sale

2003 VY Holden Commodore Original GRM06 V8 Supercar 3 x time Bathurst 1000 competitor. Whincup, Tander 2 x Log books Bathurst Challenge Competitor 2023 Heads fully rebuilt 2023 Fully set up ready to race Brand new tyres on car plus spare set of rims and tyres

This very special original Chassis no GSM 009 Kmart VT Commodore car built by Gibson Motorsport. This was the last built Gibson commodore v8 supercar formerly raced by four time Bathurst 1000 winner Greg Murphy. Debuted by the Kmart branded Gibson Motor sport team at Calder in 2000 shell championship, This car was initially driven by Greg Murphy. It became the Murphy / Steven Richards car for the Queensland and Bathurst endurance races. Scoring podium finishes on both occasions finishing 3rd. Th

In order to continue growing in the Motorsport realm, we unfortunately have to let go of some of our fleet at Pereira Motorsport! Up for sale is my 1996 BMW e36 323i Touring car replica. This car has had a lot of R&D put into it, and if you’re in Queensland or follow my page, you will be familiar with the car! It has entered several rounds of the Queensland Touring Car Championship as well as placing a strong 2nd in the 2022 Replica Tourers Championship season! The car has also been used in ma

On offer for sale is this 2000 Holden Commodore Team Brock Future Tourer raced by James Brock in the 2000/2001 BOC Gases Australian Super Touring Championship. Originally built by Brock under the Diamond Valley Speed Shop banner after Brock had claimed victory in the inaugural category race at Mount Panorama in 1999 with a VS Commodore, this VT Commodore made its racing debut at Oran Park in July 2000 and competed in Brock Jnr’s hands with backing of V8 Sleuth partner Biante Model Cars. The ca

This incredibly special Holden Ute was built for James Brock and was produced by Wayne Park in Queensland who was the original builder of all the V8 Brutes. James Brock first competed in round three of the 2003 V8 Ute Championship at Wakefield Park and went on to finish 3rd in the Championship that year along with numerous pole positions and lap records. In the same year James and father Peter Brock drove the car together and won the “Great Aussie Ute Race” which was held at the Bathurst 24 Hou

This well known Queensland Group Nc Torana is a GTR XU-1 clone with a LJ body built in May 1972. First developed by Greg Burrowes, in 1994, it ran at Lakeside’s Historic Queensland in 1995. Originally the car was finished in the standard, but quite rare, GMH Linamint and now presents in a definitely more vibrant ‘ Kermit Green’. In October 2005 the GTR passed to David Malone who for the next 8 years was active in SE Queensland sprints and hill climbs with some circuit work at Morgan Park, Warwi

Countless hours spent building this car as it was my childhood dream of having an E36 like this with a straight 6 M50. I was planning to get it turbocharged (iron block handles safely 350-400hp without internal mods), plenty similar builts done like this at “M50 Turbo Builts” Facebook Group, but life throws some curve balls and sadly I need to sell it. Plenty of photos and videos on my Instagram www.instagram.com/racingrenan BMW 325 Track car prepared by Lyus Racing in WA. Happy to assist with

3K Saloon Car, Ex Grant Johnson, 3 times National Champion and 7 times WA State Champion. Package includes Racecar, Trailer with tyre rack and toolbox and negotiable spares.

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

- project roller - fabricated 9 inch rear end -4 link anti roll bar -chrome moly funny car style cage -Viking coil overs all round - weld single bead lock 15x12 - mt 29.5-10 rears new - weld alumastar front runners - alloy fuel cell & triple pump set up -fibre glass bonnet and street bonnet -Vx Calais body kit Contact Rob 0417 881 260 Can assist with transport to Melbourne and Sydney

Perkins Engineering VT036 silver bullet 2000 Russell Ingall car Refurbished in 2016 Run at festival of Motorsports Adelaide 2017, log books x3 from 2000 up to date has not been used since 2017

VE Targa Car Supercharged LS3 Jerico 5 speed Gear Box Ford Floater 9” Diff AP Brakes Motec Dash. Intercom.

Regretful sale of my 2012 Clio RS, but not enough room in the garage for 2 x track cars! Extensively modified and improved over the last 2 years specifically for track use; could be improved further or easily converted back to (very fast) road spec. Recent work includes custom-made Brown Davis 1/2 cage (Motorsport Australia certified), 6-point Sparco harness, Sparco race seat, Black Diamond competition clutch, lightened flywheel, Quaife LSD, custom exhaust, port & polish, Cat Cams with heavy dut

IPRA 3J VS Holden Commodore. Ex Dan Russo Commodore Cup car with chrome moly roll cage, Comes with Fresh ex Gene Cook 253 engine with com cup sump, super T10 Dog box 4 speed,Romac full floater rear end, Big bearing front hubs, Bilsteins suspension with brand new Rota 18" x 9"rims and com cup brake package along with aims dash & coms radio wiring. New air Jack system fitted to car. WP: 1:06 SMSP 1:44 Car comes with extensive spares package which includes most parts to install a LS into the car.

CSV Volanti Production Touring Car. Car under went full restoration 3 years ago. Engine and transmission rebuilt 2 meetings ago. LS1 engine comes with cnc ported CSV spec cylinder heads which made 415hp at the wheels.CSV Volanti comes with homologation paperwork, Difilipo ceramic coated headers & XForce exhaust, 6 piston HSV front & Harrop rear brake calipers with circo endurance pads along with Nitron Shocks, Motec dash, New Racetech seat with RPM endurance harness, Full spool diff with 3:9 gea