19 items in Australia for sale
Most Recent
Most Recent
Keyword
Category
Price
Listing Type
All Results
25
Holden Astra SRI Turbo, set up for track days, Slotted front rotors, Ceramic front & rear disc pads, Sparco race seat (not fitted), Momo steering wheel, Racegear harness, Spare brake pads and wheels & tyres. With a couple of week ends work and very little cost you can be racing in Track days, Tampered race days, Regularity races, 6 Hour relays, Budget enduros etc. (Trailer not included)
49
Registered
Taking their most pedestrian model, injecting a Porsche tuned 255 horsepower V6 monster into where the rear passengers should sit and fitting a swathe of bespoke performance kit and trim, Renault produced an off the Scoville scale hot hatch that refreshingly reminds us cars can be so much more than just body haulers. The car to own is the Phase 2 launched in 2003 - a significantly altered car from the Phase 1 with the ability to plant all that raw power down onto the road and handle like Michae
13
RegisteredRoll Cage
**Priced to sell** Regretful sale of my 2012 Clio RS, but not enough room in the garage for 2 x track cars! Extensively modified and improved over the last 2 years specifically for track use; could be improved further or easily converted back to (very fast) road spec. Recent work includes custom-made Brown Davis 1/2 cage (Motorsport Australia certified), 6-point Sparco harness, Sparco race seat, Black Diamond competition clutch, lightened flywheel, Quaife LSD, custom exhaust, port & polish, Cat
6
Roll CageLog Book
Renault Clio R3 Max fitted by renault sport, 2.0 litres atmospheric, Sadev sequential gearbox, Ohlins 3 ways shocks, 27 rims, a few spare parts, logbook. The car has done 1000 km stages, dampers serviced one year ago, Optional : the car can be sold with a brand new engine for extra cost *Please note that the car is currently located in New Caledonia*
20 1
Roll CageLog Book
For sale is my logbooked CSV Mondo GT mock up (Holden Monaro) 3E Production car - Homologation document 3-16-001 with a large spares package. Also suitable for 3J Improved Production IPRA as is. This car previously competed in multiple Bathurst 6 Hours which is why I bought it, only for it to be taken off the eligibility list a few months later, hence why I am selling it. Can be converted to HSV GTO which is still eligible. Car is extremely well built and features an extensive weld in national
19
Roll CageLog Book
Targa Tarmac Rally car; built by Walkinshaw Performance for Renault Australia for Targa, mostly recently looked after by TMR. Ready to race package compliant to current Australian Tarmac Rally (ATR/AASA) regulations, comes with tons of spare parts. Surprisingly capable and well handling package; recently came 2nd in ATR Super Rally class. Genuine reasons for sale (surplus to requirements - have another Tarmac Rally car). Will also suit buyer looking for a track car. * Only 22000km * MA/CAMS
6
Roll Cage
Holden Monaro CV8 Rolling Shell Car has been caged for many years and after talking to officials doesn't need much to be compliant with current times. Bought it with the vision to build but unfortunately this has come to plans.
22
2003 Holden Monaro CV8 series2 Circuit Racing No expense spared Professionally prepared, turn key & Ready Experience the excitement of the track with this exceptional car and enjoy track life LS 6LTR Engine (25hrs only) Curl Over-race springs, adjustable suspension. Bembro brakes, 6 piston front& 4 piston rear. Motec PDM Motec digital Dash 2 Battery isolation switches Cobra seat RPM Harness Roll Cage Diffs true track 3-5 Ratio Race tyres.
7 1
Registered
ICONIC AUSTRALIAN RACE CAR My road registered 1969 Holden HT GTS Monaro is for sale. Extensive tarmac rallying history including a documented London to Sydney finish and Targa Classic podiums. Fully engineered and Log booked with a Ron Harrop 500Hp/495FtLb Chevrolet 350 engine and fettled for racing by Ron Missen. Muncie gearbox, GM10 bolt differential and four wheel disc brakes. An extremely reliable, fast and collectible Monaro. $250,000 ono genuine enquiries to Richard 0416030529.
11
Roll Cage
Unregistered, 2007 Renault Megane R26 127,XXX km's Engine is stock apart from the exhaust modifications. All mods listed below are near new, or new. Fully race ready, an amazing track/tarmac competitor. I'm looking to sell so as to move onto another project, otherwise I would keep this eccentric machine. It runs great and looks amazing - with special attention to fit, finish and attention to detail, this is not just a race pig. It smashes the track whilst looking the part. Mods: BC Racing coi
4
Roll CageLog Book
IPRA Holden Monaro Current National #1, Lap record holder SMP, Phillip Island, The Bend. Holinger RD6H Tilton 5.5" 3 plate HRT Mag bell housing - reverse starter Harrop 9" IRS Adjustable Bars F & R Many lightweight parts Full Motec C127, PDM30, M150 ECU, Motorsport Loom ATL Kevlar Bladder Tank / Bosch motorsport pumps Tyre Temp Sensors x 4 MCA Gold Series Suspension Alcon Supercars calipers F & R - AP rotors LS - Darton sleeves, Callies crank, Higgins custom heads, Morrison ITB Built from new
23
RegisteredLog Book
Renault clio williams 1, only one in Australia
6
Roll CageLog Book
2003 WRX used for sprints rally & track days. Very reliable great entry level car. 200km on new clutch & gearbox. Near new front rotors, front and rear pads. 2nd set of rims & tyres. Brown Davis state level roll cage. Car is logged 3J. Maintenance & race prep by Ravage race works
7
Roll Cage
Highly competitive hillsprint, tarmac rally or circuit vehicle for sale for under the cost of parts / development. This professionally built and maintained Renault Megane 225 sport in its debut tarmac event placed 3rd in Gt Sports, It is built to the highest standards with most works completed by Renault specialist with all the necessary upgrades to consistently perform with minimal fuss. Parts and modifications list is extensive and not limited to the below: TTV clutch r26r and flywheel B
10
Roll Cage
2000 GC8 WRX Rolling Shell, was being built for Tarmac Rally and has a CAMS certified cage. Does not extend to the front towers at this stage, although the strut tops have had cromoly plates added over them and the A pillar to chassis rails have extra bracing. Has sill jack points also. The cage has double diagonal bracing throughout and gussets everywhere. Seat mounts are welded in also. Was a clear title undamaged road car and has been kept indoors since it was pulled off the road in 2014/15.
1
Road registered club car, just completed. This car was my daily driver up till 2012 when it was put into storage. Interior has been semi stripped (parts kept), motor rebuilt, new clutch, MCA suspension, belts, almost standard just made better.
9
Gc8 wrx 2jz!!! Was a four door but had a wide body installed and rear doors deleted to fit the supra IRS in. 2jz conversion Built r154 5 speed All supra subframes and mostly a gc8 shell with everything supra underneath. All work on the car was done by top class automotive in Sydney! All fab work done by mongster fab in Sydney Brand new haltech elite ecu, look, and dash Just upholstery did the dash in alacantara and seats in alcantara blue diamond stitch. Tuned by pulse racing. Made 700hp th
34
Personally imported from New Zealand, owned by an Engineer in Possum Bourne’s race team. Would be suited to Road, Race or Targa events. This won the open class at QLD Time Atrack in 2017. Full specs available via a pdf.
1
One owner from new 2006 Subaru sti wrx sti road/race/rally car! S and J billet engine with blouch dominator with no expense spent! 600hp atw road drive able car which can be taken to track or drag strip then driven home. more details upon enquiry.