124 items for sale

Ford GT40 replication car made by Roaring Forties, built by Wil Escabache (ICCARS) This car is an absolute beast of a car, fully rebuilt suspension, engine, transaxle, wheels just months ago and has traveled just over 1,500klms since The engine is a twin turbo charged 5.0L Windsor with custom intake, Roush Heads, solid roller Competition Cam and lifters, Shaft mount rockers, custom forged pistons, forged H-Beam rods with 2000 series rod bolts, DART SHP 4 bolt mains block, steel nitrided crank,

If you think the Subaru WRX 22B is rare at 424 units globally then the car you are looking at would have to be the holy grail of Japanese classics. Only 30 cars were manufactured by Ralliart UK of which 20 were painted Scotia White and a mere 10 finished in Satellite Silver. And this particular Satellite Silver RSX – first registered in the UK and imported into Australia in December 2000 - is believed to be the only one in the country. To say this is an exceptionally rare car would be an und

IT ACTUALLY PAINS ME TO TYPE THIS Roller- MR ROTA NO ENGINE( everything that is bolted to it stays on engine, including headers , fuel reg, injectors, remote oil filter housing) ,CLUTCH,BOX - everything else stays . I have stolen tail light assemblies for new car but ill find some more from somewhere that will be in mint condition alloy radiator , spal thermo, electric water pump custom chromolly front crossmemer custom 10l fuel tank in engine bay with holley fuel pump microtech LT16 ,7 inc

1998 Evolution 5 Track / Tarmac Rally Car. Full weld in cage to front towers. Car was built out of a totally original rust free complied road car. 130,000km Timing belt and major service carried out at 112km Built by Techsport in VIC 234kw at the wheels, tuned by Melbourne Performance Centre Modifications / extras: Mechanical: Kelford 272 Cams Kiggly Racing HLA oil pressure reg Walbro fuel pump Evo 7 RS rear diff Evo 9 Clutch with Exedy MC14 Competition plate Ralliart rear bushes HKS

Believed to be the very first Mazda RX-8 sold and delivered in Victoria - I'm the third owner, with the original having owned for 20 years purchasing and servicing at Ringwood Mazda. Personalised registration plates from day one - RX-801 are still with the car. I purchased the car in early 2023 as a non-runner and sent the car to Promaz in Thomastown, VIC who completely rebuilt the engine to exceed Mazda specifications costing in excess of $21,000 - all receipts, intricate details and photogra

Properly built from front to back with no expense spared. This vehicle was bought in by Mitsubishi Australia and built by Steve Hoinville. Was then bought to the spec you see here by Alan Heaphy (team Principal of Mitsubishi Ralliart) Very competitive production car from day one with multiple wins. Starting from scratch with a brand new 9 this car was a ground up build. Quick specs: Full national level cage (Tarmac spec) (whole interior stripped and painted nardo grey including boot AP Rac

Classic Mazda Rotary Rally Car. Spent nearly all of its life in a shed, has never needed rust repairs. Strong Mazda 12a 6port rotary motor, 4 speed, RX4 Manual Gearbox. Starts, Runs and drives as it should. Pops flames, bangs and crackles on trailing throttle. New Mazda LSD with 4.4 gears in a RX3 diff housing. Engineers Certificate, and Cams Logbook. Was on full Vic Reg, now on Club Plates. Never been a rust bucket but has been on a few Rallies. Check out the Photos as from part of the descrip

LSTV 8 ONE OFF FORD FGX XR8 Built September 2015 -1 of only 98 built “Smoke” 6 speed manuals. -Fitted with FORD PERFOMANCE ALUMINATOR SUPERCHARGED 5.0 LITRE CRATE ENGINE (Engine Number Stamped to match Original Build number and Vic Roads) (Original block/motor available as part of sale. Motor is stripped down and would need some work before re-assemble) - 457 KW (615 HP at rear wheels) 743 nm torque (35% more than limited edition “sprint” series) -9:5:1 Mahle forged low compression pistons

FORD ESCORT MK2 GROUP 4: MOTOR: 0-KM * 2 Liter Pinto * Rebored with new forged 92mm piston * New Burton Rods with ARP Bolts * Reground balanced crank * Head rebuilt with 48mm inlet & 38 exhaust valves * Light weight English Rockers * Light weight fly wheel with twin plate clutch * Twin 45's with new kits throughout * New oil pump * New alloy sump & pickup SUSPENSION: * Billsteins all-round GEARBOX: 0-km * Sierra 5 speed with close ratio straight cut kit " English 3J" * All new

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

For sale evo 8 race car Built for targa - 6 point bold in agi cage (national level) - new Omp seat and 6 point harness - spare parts and accessories - new set of wheel and street tyres. (not pictured) - 2 new semi slick race tyres - new paint 4 years ago - Fire extinguishers (x2) - Rear mounted battery - MCA Purple Suspension, fully adjustable - Front RS strut tower brace -Brembo Brake Callipers -Braided Brake Lines -Walbro 225 Fuel Pump -Fuel Injectors serviced and flow tested -Kelford 272 C

Lovely example with some tasteful improvements maybe only RHD 1998 pace car in Australia has travelled just under 100K and all in pristine condition TELEPHONE TREVOR JOWETT ON 0412338332

2021 Chevrolet Camaro Gen 3 #001 Prototype V8 Supercar CHASSIS: #SC-001 / 888A-056 BUILT: 2021 ENGINE: 5.7-litre V8 pushrod by KRE MANUFACTURER: Triple Eight Race Engineering The Gen3 Chevrolet Camaro prototype was the first Gen3 Supercars chassis assembled and undertook a rigorous testing programme ahead of the platform’s induction to the 2023 Repco Supercars Championship. Owned by Supercars, the car was built by 11-time Supercars teams’ champions and Chevrolet Homologation Team, Triple Eigh

Ford Performance Motorsport - Gen 3 Mustang #SC-002 V8 Supercar Prototype CHASSIS: #SC-002 BUILT: 2021 ENGINE: 5.4-litre quad cam Coyote V8 by Herrod Performance MANUFACTURER: PACE Innovations A chassis built by PACE Innovations in 2021, the Gen3 Ford Mustang prototype was the first Ford to be built ahead of the implementation of Gen3 regulations to the Supercars Championship from 2023. The car undertook all development testing for Supercars’ Gen3 program, with Ford Homologation Team Dick Joh