Honda Integra DC2 Race car. Built from a road car throughout 2015/16 (with new engine this year). Completed a total of 4 events in 8 years so due to this inactivity the car is offered for sale. Body is a straight rust/accident free shell. Has a full bolt-in alloy roll cage, Sparco Evo race seat and Schroth harness. Engine is an Abe Race Engines built B Series 1800cc in a mild state of tune. Runs Supertech hi-comp pistons, Toda B Spec cams, Skunk2 Throttle body/intake, baffled sump, Hardrace mo
Properly built from front to back with no expense spared. This vehicle was bought in by Mitsubishi Australia and built by Steve Hoinville. Was then bought to the spec you see here by Alan Heaphy (team Principal of Mitsubishi Ralliart, Manager of Gibson Motorsport R32 Program) Very competitive production car from day one with multiple wins. Starting from scratch with a brand new 9 this car was a ground up build. Quick specs: Full national level cage (Tarmac spec) (whole interior stripped an
2x excels 1x race car 1 x running car stripped ready for roll cage Enough engine spares to build atleast 3 engines + lots of new engine parts. Spare shocks Spare racing rims and tyres Too much list.
Mitsubishi Evo 4 Race Circuit or Tarmac History of vehicle not determined but was built and setup as a tarmac car and was in storage for some years as from what was a deceased estate . I purchased the car from The previous owner who had car for a couple years doing some rally sprints and short tarmac events . Drives and handles extremely well with no problems . Ready to race . Has roll cage which would have met requirements some years ago but no log book can be supplied or serial numbers on
Near new Hyundai i30N circuit or targa car built by Paddon Rallysport. Built from a brand new 2023 model i30N. Has 2,000km on odo, 1800km from gentle road use before build, 200km from track laps. Car is fully road legal with authority card. Has 1 year mechanical warranty remaining. Pricing is negotiable depending on what is included on the car and is plus GST. We have utilised the standard high performance base car of the N range. 280bhp, FWD, DCT paddle gearbox to provide a fast and reliab
For Sale: 23/24 built hyundai excel. Extremely clean and competitive build! Chassis has been completely stripped and sand blasted. Engine bay, in-car and underside of car has been powder-coated white with exterior painted in a 2 pack primer and paint. fully log-booked car with only 4 meetings completed and consistent top 10 and high finishes Some features with the car: - Motorsport Australia Logbook - Fataz sealed race engine - sealed gearbox - sparco seat - 5 point racing harness - Kulin ra
Mitsubishi Mirage Asti gravel rally car. Built and logbooked for the beginning of the 2011 season, this car has competed in West Australian State and Clubman Championship rallies, and Targa/Tarmac Rallysprints scoring podium results and class wins. - Freshly rebuilt 1600cc 4G92 MIVEC - Standard gearbox with a KAAZ limited slip differential and Albins 5.1:1 final drive - MCA Gold competition suspension built specifically for this car with ralliart bushings throughout and Hardrace adjustable re
1998 Evolution 5 Track / Tarmac Rally Car. Please ask for permission to by if needed before calling and inspecting, Car is of great quality and priced very sharply. Vehicle is fully complied (not a race only import) so any event needing special rego etc is no problem. Full weld in cage to front towers. Car was built out of a totally original rust free complied road car. 130,000km Timing belt and major service carried out at 112km Built by Techsport in VIC 234kw at the wheels, tuned by
Honda Integra 1998 type R Honda Integra supercharged. built by BYP racing with every intention to be a front running car. Built to mirror their winning white integra but with a few more extra bells and whistles. Motec dash- Hondata ecu Electric powersteering to much to list... Any inquiries or questions please don’t hesitate call or txt BYP Racing Built K24 Engine Long Block K24 Block Core and K24A3 crank BYP CSS Block Prep Cylinder Support and O Ring Manley H Beam K24 Forged
1999 Honda Civic EK GLI, with K20Z1 out of a (DC5 Type S) - The Ultimate Street/Track Civic in Immaculate Condition - Proper build with all quality parts - The entire build is only approx 350km old - All parts purchased brand new - Looked after, Built & tuned by BYP - K20Z1 Registered to the car - Currently tuned to a 147kw at the wheels. No corners cut during the build from paint/panel done by Mesiti Bodyworks to all the mechanical by BYP. The intention of the build was to have a high-qualit
FOR SALE: Front Running Hyundai Excel Racecar - $16,500 ONO We're offering this professionally built Hyundai Excel Racecar whether you're a seasoned racer or a beginner built to the high standard, turn the key and go. Key Features: - AGI National bolt in roll gage - Fully logbook and rebuilt engine sealed by ACT Autoworks only done 3 races since rebuilt - Racetech circuit seat - Custom Airbox Setup - Quick release steering wheel - Alloy floor plate - Short shifter - Race built gearbox
Hyundai Excel X3 Racecar Front running SA car MA logbook Eastwood Misch-spec engine All the Misch’s Excel Garage go-fast bits, including: -3 core alu radiator -exhaust -air intake -short shifter -Konig wheels Weld-in Mike Vidau cage Brown Davis floor pan SE bushes throughout Solid engine mounts Velo Apex seat Velo harness (new 2024, but red...) Raceline window net (current spec) NACA duct window insert Motorbatt AGM battery New Walbro fuel pump, foam filled tank SAAS gauges- tacho, water,
New Build. Tested and set up over the last year at open practice. The car was entered into the Sydney 300 for its 1st Race, Achieving pole position and the race win in division E. -National / Rally FIA role cage -PB 4 piston aluminum calipers -DBA 5000 two-piece rotors 320x28 -AP Racing CP3215D50 pads 90% left -Custom cacuum chamber, can adjust pedal feel - Wilwood rear brake Bias -PB damper adjustable coilovers -Quaife ATB helical LSD -Custom exedy button clutch -Enduro developed engine. -Fo
FOR SALE Hyundai Excel X3 Series Race Car Specs - Brand New Build Only Raced 2 Events - Finished Top Ten At Excel Nationals Latest spec Rowse Motors Engine - Top HP Latest Rowse Motors Exhaust System Brand new latest spec supashock suspension New genuine suspension bushes through out whole car Engine oil cooler 3D printed brake ducting State level AGI Roll cage Brand new Schroth seat belts New Cobra Seat New brakes all round Brake bias adjuster New wheel bearings Short shifter Alum
Ex Mirage Cup Car bought with no prior damage, the car was raced in western australia under IP 1600 rules then converted to under 2ltr with no expense spared. Motor: JE pistons Carrillo rods Rubuilers crank Jun Cams Extensive headwork Dry Sump Butler tuned length extractors ( 10 hours on motor, comp is 250 on all cylinders) Gear box: RallyArt close ratio gearset Albins 5.1 crownwheel pinnion Kaaz 1.5 lsd Quatermaster 5.5 inch twin plate clutch ( 10 hours) Car: Motec m400 Custom ali fuel ta
For Sale is my Evo 7 RS fully serviced and tuned by Insight Motorsport in Sydney. Everything has been checked, refurbished or near new. Significant $$ has been spent on the vehicle with extensive weight reduction. Race weight with all fluids and approximately half fuel is 1305Kgs. Eligible for many race series. Power is 390kw at all 4 Wheels at 28 psi (E85) Also Tuned at 316kw at all 4 wheels on 23 psi (E85) Car is painted not wrapped. Car has Log books. No accident history! Engine: 2.
Honda EG civic hatch race car, Built towards time attack and circuit races. Currently the fastest FWD car in W.A - Barbagallo raceway (58sec) and Collie raceway (1.11sec) with plenty more in it. Sleeved and built k24 motor making 580hp (only ran for 4 events and just had a check over with new fluids) Quaife Sequential gearbox (new) Elite racing baffled sump KAZZ 1.5 way diff DBW throttle setup traction control launch control MCA Red coilovers with custom spring rates with spare springs, New S
Fresh Built K20 EK Civic, has not been out yet if not sold it will be making it circuit debut at Sydney Motorsport Park For the ARDC Nighshift 18th April 6.30-10pm The car was built for improved production, it had a harness bar fitted but has yet to have a cage fitted and log books completed. If you want the car with a cage fitted and the car log booked I can arrange that no problem, it takes about 4 weeks to have the cage fitted. Prices are as follows. Club spec cage total will be $41,000 to