77 Circuit Racing for sale

1998 Evolution 5 Track / Tarmac Rally Car. Full weld in cage to front towers. Car was built out of a totally original rust free complied road car. 130,000km Timing belt and major service carried out at 112km Built by Techsport in VIC 234kw at the wheels, tuned by Melbourne Performance Centre Modifications / extras: Mechanical: Kelford 272 Cams Kiggly Racing HLA oil pressure reg Walbro fuel pump Evo 7 RS rear diff Evo 9 Clutch with Exedy MC14 Competition plate Ralliart rear bushes HKS

Properly built from front to back with no expense spared. This vehicle was bought in by Mitsubishi Australia and built by Steve Hoinville. Was then bought to the spec you see here by Allen Heaphy (team Principal of Mitsubishi Ralliart) Very competitive production car from day one with multiple wins. Starting from scratch with a brand new 9 this car was a ground up build. Quick specs: Full national level cage (Tarmac spec) (whole interior stripped and painted nardo grey including boot AP Ra

EVO 9 LHD Genuine full Voltex Aero kit with light weight panels and Lexen Fresh 2.2L Including New 2.2 Crank New I Beam Rods New CP Forged Pistons New Modified Oil pump Assembly New Timing Belt and kit New Water Pump AMS manifold AMS intercooler Freshly rebuilt Garret EC1 Turbo Nitto 1.3mm Stopper Head Gasket Kelford 272R CAMS OEM VRS Gaskets Engine Oil TOTAL 10/60 Racing New OEM Evo 6 Koyo Radiator New OEM Idle Air Control Motor 2000cc injectors 2 x Bosch high volume fuel pumps New Ra

2000 VX SS V8 with LS2 6.0lt Motor has just been built and has only done three sprint days at Sandown Raceway. Built by Octane Alley performance centre. Balanced engine Crow race cam kit Pepro stainless steal race valves INJ189 Injectors .020 shorter chrome molly push rods VCM sump with baffles and hinges Fully reconditioned cylinder heads Oversized Hypertech pistons Dual valve springs Engine was only bored to the first stage Engine was built for strength and reliability with power. Dyno tu

Genuine V8 SS, mostly built and maintained by Ron Misssen before he retired (Ron has built quite a few famous Bathurst & Championship winning Touring Cars). Car is road registered as a Tarmac Rally Car and is log booked with Motorsport Australia. I developed the car mostly for track days/hill climbs/super sprints etc. but it has only been used on test and tune days so everything is fresh. Some specs below; Full custom-made, ball jointed and solid mounted front end including MCA adjustable coilo

On offer for sale is this 2000 Holden Commodore Team Brock Future Tourer raced by James Brock in the 2000/2001 BOC Gases Australian Super Touring Championship. Originally built by Brock under the Diamond Valley Speed Shop banner after Brock had claimed victory in the inaugural category race at Mount Panorama in 1999 with a VS Commodore, this VT Commodore made its racing debut at Oran Park in July 2000 and competed in Brock Jnr’s hands with backing of V8 Sleuth partner Biante Model Cars. The ca

This incredibly special Holden Ute was built for James Brock and was produced by Wayne Park in Queensland who was the original builder of all the V8 Brutes. James Brock first competed in round three of the 2003 V8 Ute Championship at Wakefield Park and went on to finish 3rd in the Championship that year along with numerous pole positions and lap records. In the same year James and father Peter Brock drove the car together and won the “Great Aussie Ute Race” which was held at the Bathurst 24 Hou

Perkins Engineering VT036 silver bullet 2000 Russell Ingall car Refurbished in 2016 Run at festival of Motorsports Adelaide 2017, log books x3 from 2000 up to date has not been used since 2017

Genuine original VF Craig Lowndes Commodore, No.69 of 233. Built to National 3E Production Touring Car spec by Racebred Engineering using the best components including Murray Coote suspension, Motec, Bond enduro fuel tank, diff cooler, firebomb, cool suit equipped and much more. This is an immaculate, well sorted, competitive car that is eligible for a variety of state and national race categories. Call Scott 0413 254 962.

PRICE DROPPED !! Heavily modified and built EVO 7 race car. Motec M800 with Motec C127 dash race logging kit incl can loom Nitto 2.3 stroker GT pumps 762 turbo with cold air intake Walbro 450E Fuel Pump on E85 Recently tuned by MPC. Made 350awkw on high boost and 300awkw on low boost on E85. New 5 speed Modena dog box (one track day old) new exedy twin plate clutch x4 Volk TE37’s 18x10.5 wheels with A050 295's. (two track days old) Velo Apex XL seats, Velo Light harness DBA competition rotors

New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi

Holden VT Saloon car. Multiple championship winning car. Pfitzner Gearbox, very quick car with great handling setup. BRE roll cage In good condition all setup and ready to win races.

IPRA 3J VS Holden Commodore. Ex Dan Russo Commodore Cup car with chrome moly roll cage, Comes with Fresh ex Gene Cook 253 engine with com cup sump, super T10 Dog box 4 speed,Romac full floater rear end, Big bearing front hubs, Bilsteins suspension with brand new Rota 18" x 9"rims and com cup brake package along with aims dash & coms radio wiring. New air Jack system fitted to car. WP: 1:06 SMSP 1:44 Car comes with extensive spares package which includes most parts to install a LS into the car.

Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount

N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en

30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST