21 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
13
Roll CageLog Book
For sale evo 8 race car Built for targa - 6 point bold in agi cage (national level) - new Omp seat and 6 point harness - spare parts and accessories - new set of wheel and street tyres. (not pictured) - 2 new semi slick race tyres - new paint 4 years ago - Fire extinguishers (x2) - Rear mounted battery - MCA Purple Suspension, fully adjustable - Front RS strut tower brace -Brembo Brake Callipers -Braided Brake Lines -Walbro 225 Fuel Pump -Fuel Injectors serviced and flow tested -Kelford 272 C
10
Registered
FOR SALE 400kw EVO X BATHURST EDITION TMR (ADM) - Comes with spare single Titanium SMB Exhaust Tip - Comes with a recirculating pipe which can be easily clamped on if pinged for Loud Exhaust - Reconditioned Front CV Joints - Serviced every 5,000 kilometers for minor service and every 10,000 kilometers for full service. - Tuned with 2 modes – which both Runs on E85 Only – Last Tuned by Elite Pro Tuning - Low Boost: 28PSI – 380KW - High Boost: 35PSI – 425KW Part List: - Nitto 2.2L Stroked - GS
9
Roll Cage
Selling my 300ZX fairlady. Runs great, has a drift roll cage in it. Adjustable coilovers, limslip diff bigger brakes, stayer wheels with very good tires and only done 125,000 klms. Was going to race lemons series with it but didn’t. Great budget entry race car.
10
RegisteredRoll CageLog Book
Only selling as I recently built a G4 car. Originally built for Ross Dunkerton for 2006 Targa West. Also previously driven by Simon Knowles in the Asia Pacific Rally Championship. Very lightweight and well built vehicle from Team Mitsubishi Ralliart. Well sorted and fantastic handling car. Fresh engine built by Techsport and Jeff Beaumont 216kw atw on 98 fuel. Race prepared by Adrian Stratford Motorsport and ready to enter its next rally. New Exedy Clutch Kelford Cams Motec 800 ECU and C125 Das
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
7
RegisteredRoll CageLog Book
IMPORTED BY MITSUBISHI MOTORSPORT FULL QLD REGO - CAMS LOGBOOK ONLY 24 000KM ON CHASIS 2018 TARGA TASMANIA - 2nd Class / 5th Outright Rookie Engine rebuilt less than 10 000 km ago by previous owner ( 210kw @ wheels on 98 tune ) Currently on factory Evo 8 turbo - Fuel sampler fitted to fuel line Motec ECU ( Launch Control & 2 stage Anti-Lag activated ) Proflex ball bearing cannister shocks & Adjustable Coil overs ( Eibach springs 2 sets ) Full Welded Bond Chrome Molly cage Gearbox recently fu
5
Brand new Mirage Proto/G4 body set up for Evo X, has R5 style steering column, Lexan window kit, R4 strut towers for longer travel, carbon door cards and roof vent. Fully painted and ready for assembly. Import duties and import certificate are paid and completed.
4
Roll CageLog Book
2001 Mitsubishi Lancer Evolution 7 RS (Evo VII) Log booked as production touring car 3E, fun and low maintenance competitive car Fresh motor that has only done 3 race meetings with a larger baffled sump, tuned, MCA red suspension, Haltech dash, ducted brake cooling, Cams approved Bonds roll cage, additional fuel tank in the boot with a swirl pot and bosh fuel pump and much more.. Will include a 2 sets of spare wheels (evo 7 and evo 8) and some race-day spares
2
Owned this for almost 20 years, car body has around 100 thou on it, the engine was built with bigger cams, stage 2 BC Engine was rebuilt with a triple plate gasket kit throughout, runs E85 1000cc injectors, bigger external fuel pump, brand new hyper gear turbo low mount with steam pipe manifold, straight through 3 inch exhaust with twin blast pipes, five stud conversion with s15 brakes. So many mods done, it’s been dyno tuned with a haltec platinum, heaps of after market steering arms from gktec
8
Registered
2003 Nissan 350z Track with DCT transmission !!! 500 (8psi ULP98) 711hp(16psi E85) Staged traction control, antilag, rolling antilag, shift cut and blips, electronic clutch Engine and Trans tuned by Nikol Racing Chassis Custom Aluminium bash plate Modified inner guards to hide all turbo piping Battery Relocated to Boot in Box Relocated windscreen washer bottle Fully mod plated (except transmission conversion) Rolled Guards in result unfortunately cracked the paint Engine Cold Comp test 1
12
1995 GTR33 track car, not complied, whole shell was seam welded. weld on full cage .trust bonnet and front bar. RB26 engine dismantled waiting for re build, spun a bearing, 350kw at wheels on E85. has N! bottom end , virgin bore for rebuild, good head with Tomei cams and all usual machine work, plus a brand new head RB26 same work done. been using a Mamba 3582 single ,no issue. plus pair of HKS 2530 ,dyno time only. I prefer single turbo. HKS 2530 will be good for street car. all suspensions ar
19
RegisteredRoll CageLog Book
NISSAN BLUBIRD TRX TURBO. Motec ECU FJ20 DET, 5 Speed Box, IRS Rear with R200 Long Nose LSD. GTR Wheels, Brakes, Power Steering and Other Mechanical Inclusions. Log Booked and FIA Standard Homologation Chromalloy Safety Cage. Winged Seats and 6 Point Harness's. (No Trip or Intercom included) Engine tune at a very Drivable 350hp on 98 but has produced 400+ on e85 (additional e85 Motec ECU and Injectors included in sale) Dyno Tune check done Jan 24 in preparation for sale and is ready to race. Ca
6
RegisteredRoll Cage
1962 MORRIS MINI 850 FITTED WITH FUEL INJECTED YAMAHA R1 AND QUAIFE LSD HALTECH ECU FIBREGLASS LIFT OFF FRONT HALF ROLLCAGE VENTILATED ROTORS WITH 4 SPOT CALIPERS FRONT COILOVERS 2 FUEL TANKS HIGH AND LOW PRESSURE FUEL PUMPS 3 PIECE ALLOY WHEELS FITTED WITH HOOSIER TYRES 2 RACE SEATS 2X 5 POINT HARNESS NSW ENGINEERING PAPERS WAS REGISTERED IN NSW CURRENTLY REGISTERED IN QUEENSLAND
9
Roll Cage
For sale s13 Silvia. I've owned the car for over 10 years and have decided its time to let it go. ENGINE 450hp at the hubs on E85 Forged ross piston and spool rods Brian Crower 264 cams Upgraded valve springs R35 coilpacks Kinugawa TD05-18G turbo Steampipe manifold Alloy radiator with AU thermo fans Oil Cooler with remote filter Bosch 1650CC injectors Turbosmart fuel reg Bosch 044 fuel pump with surge tank Haltech Elite 1000 with a custom harness LS alternator DRIVELINE BRAKES PAR engineer
12
Roll CageLog Book
R33 GTR Spec log booked and trailer and spares. Done 144 lap time at Phillip island with not the best driver. New rebuilt motor RB26 forged with -5 turbo's and Motec m800 with dash. Engine only done 1 hour run in time. R34 reco 6 gear box with triple plate clutch, also avalable at extra,Trust dog box with another triple plate clutch. Harrop brakes front 6 spot rear 4 spot. BC modified suspension. Two sets of Advans wheels and tyres 18x9 with Yokohama semi slicks. 12 point roll cage cams apro
14
Roll Cage
Z31 professional strip down to body shell , painted , roll cage installed & built by race car manafacturer for racing , Car has completed many Targa Tas & Targa events , circuit racing and Hill climb & various other forms of motor sport events , fully rebuilt low compression engine , forged internals , large pelenium manifold , custom ECU , oil , fuel & power steering coolers , Adjustable height & firmness control hydrolic dampners on all corners , massive tripple piston GT Racing calipers with
10
RegisteredRoll Cage
For Sale is my “Evo 3” street and track car. In 2019 the car was refreshed, looked over and motor was rebuilt by the highly regarded Mitsubishi Evolution specialist Nick Ashwin of NA Autosport and Engineering. The invoices for this work total over $30,000. For those unfamiliar with Nick he renowned as one of the best in the business having worked for the likes of Chris Atkinson, Possum Bourne Motorsport and Neal Lowe Motorsport amongst other local and international outfits.
The car is obviou
8
Nissan Silvia S13 reconditioned stage 2 engine. Black top SR20 with S15 turbo. Race seats, fully adjustable suspension, no rust, large sump, large alloy radiator with 2 electric fans. Very tidy race car, comes with heaps of spares, engine, doors, wheels, tyres, etc.
7 1
Roll CageLog Book
Bought as a mint road car in 2014 with 71k on the clock, now done 75k it was converted to tarmac rally spec with a Bonds rollcage, and other performance modifications including: bigger intercooler, alloy radiator, bigger turbo outlet, ceramic coated downpipe, front lower suspension braces, cold air intake system, new Kevlar belts, lightened steel flywheel and dual plate competition clutch, MCA Red suspension, Whiteline suspension bushes, full floating ferodo discs with ferodo pads, brake disc co
10
Roll Cage
Hey guys n gal's, selling my s13 track car. Has only seen circuit days, but more than suitable for drifting or whatever you're into. No rego, obviously, solid track car that's been well looked after. Built with love, sweat and tears in a professional performance workshop Running gear:RB25 neo DE+t, RB20 DET box, making 311kw tuned on E85, big extended sump holds 8L of oil total, locked R200 diff 4.3 gearing, 5 stud conversion from r33/s14, r33 turbo brakes and rotors, one piece tailshaft Suspens