95 items for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
17
Roll Cage
EVO 9 LHD Genuine full Voltex Aero kit with light weight panels and Lexen Fresh 2.2L Including New 2.2 Crank New I Beam Rods New CP Forged Pistons New Modified Oil pump Assembly New Timing Belt and kit New Water Pump AMS manifold AMS intercooler Freshly rebuilt Garret EC1 Turbo Nitto 1.3mm Stopper Head Gasket Kelford 272R CAMS OEM VRS Gaskets Engine Oil TOTAL 10/60 Racing New OEM Evo 6 Koyo Radiator New OEM Idle Air Control Motor 2000cc injectors 2 x Bosch high volume fuel pumps New Ra
9
Roll CageLog Book
69 Camaro Z28 Steel Body, Fibreglass Front Clip Doors & Boot. Awesome paint job inside & out. Race Built in USA, Imported to NZ 9 Years ago, has been drag racing in NZ for the last 8 seasons, with awesome results, personal best 8.1 @ 167mph on the quarter mile. Goes straight all day long, very consistent with its times. Awesome car to drive. Running Pat Musi 632 Race Engine, with only 16 runs on fresh rebuild, C16 Fuel, Trans 2 Stage Powerglide, Dedenbear Case with Neil Chance Bolt together Conv
56
Roll CageLog Book
2014 Nissan Nismo GTR GT3 Race Car - Fanatec GT World Challenge Australia Trophy Class Eligible - Fresh rebuild - Brand New Engine - Current Cams Log Books - Ready to Compete We are very excited to offer you the great opportunity in securing this GTR collector's dream, the sought after and extremely competitive 2014 Nismo GTR GT3 Racing Car which achieved Nissan’s first overall victory in Pirelli World Challenge, U.S.A. This extremely rare example is 1 of just 4 in Australia and 1 of just 27
8
Roll Cage
Super solid, fast & fun car to drive. Quality parts & execution throughout. CHASSIS *full weld in cage to CAMS national speciation (from front to rear strut towers) by AGI *Metal rear firewall *Carbon fibre boot floor AERO *ARP dual element carbon rear wing with solid mounts to chassis *Topstage carbon fibre front splitter with adjustability *Carbon fibre intercooler ducting by Sydney Composites ENGINE *sr20det with 395hp at the rear hubs by Dahtone. *fuel cell in rear with surge tank runn
42
Roll Cage
Overview: • This Chevrolet Camaro has been with its current owner for almost a decade after acquiring it from Tennessee and shipping the car to Australia • Under its previous ownership in the USA, the car ran in the Sports Car Club of America GT1 and GT2 classes • It sports a new AR Bodies muscle car shell on a Panoz chassis that was assembled by Penske Racing to an incredibly high standard • Under the bonnet sits a Chevrolet LS1 engine putting down 400hp to the rear wheels • The Camaro has bee
8
Roll Cage
'78 Z28 race car SBC 350. Top loader 4 speed. 9" diff. Mini lite wheels. Just updated cams roll cage with bond roll bars. Have Pontiac front and other spare parts for body to be eligible for Australian trans am series. Believed to have NASCAR engine. Spare wheels available. Not a lot to do. Can complete work at buyers cost. Regretful sale.
10
Registered
FOR SALE 400kw EVO X BATHURST EDITION TMR (ADM) - Comes with spare single Titanium SMB Exhaust Tip - Comes with a recirculating pipe which can be easily clamped on if pinged for Loud Exhaust - Reconditioned Front CV Joints - Serviced every 5,000 kilometers for minor service and every 10,000 kilometers for full service. - Tuned with 2 modes – which both Runs on E85 Only – Last Tuned by Elite Pro Tuning - Low Boost: 28PSI – 380KW - High Boost: 35PSI – 425KW Part List: - Nitto 2.2L Stroked - GS
6
Roll Cage
Ideal sprint/hillclimb car with freshly modified and dry sumped 3.8 litre Magna V6,fresh gearbox and LSD with 4.11 ratio. Electric power steering, BC racing HD struts and springs, 380 brakes & modified suspension. Half cage with intrusion bars, 6 pt harness and 17x9 lightweight wheels. Too many features to mention. Awesome car to drive, 1.17 flat at Mallala ,50.36 Backbone hill climb with 70 y.o driver. Plenty of improvement left......reluctant sale at $22000......cost more than that in parts.
16
Roll Cage
Heavily modified and built EVO 7 race car. Motec M800 with Motec C127 dash race logging kit incl can loom Nitto 2.3 stroker GT pumps 762 turbo with cold air intake Walbro 450E Fuel Pump on E85 Recently tuned by MPC. Made 350awkw on high boost and 300awkw on low boost on E85. New 5 speed Modena dog box (one track day old) new exedy twin plate clutch x4 Volk TE37’s 18x10.5 wheels with A050 295's. (two track days old) Velo Apex XL seats, Velo Light harness DBA competition rotors, 3 inch brake ai
6
Roll CageLog Book
Evo 5 CP9A production touring log booked currently running in Improved production and combined sedans. Brand new Engine built by Dashsport with new Evo 9 turbo and manifold just run in and tuned. State spec welded cage with dual fuel tanks currently running on 98ron but is E85 compatible. Reflashed ecu, RS drivetrain with Ralliart front diff. AP front calipers and Brembo rears. Quick reliable car with top finishes in NSW and QLD Production car championships.Ideal for tarmac rally also. 3 sets of
14
Roll Cage
New build for circuit racing & or tarmac rallying, Motec M84 ECU, Motec Full Feature CDL 3 Dash with track logging & GPS, Motec PDM 30, Motec Keypad etc., very high build quality & specification, RB20, ARP head studs, MML head gasket, big wing baffled sump, external head to sump oil drain back, CES manifold with Garrett 3071 turbo, waste gate, blow off valve, intercooler, cold air box, Plazman front mount throttle body, uprated fuel rail and injectors, made a lazy 240kw at the wheels with 15psi
6
Roll CageLog Book
Reluctant sale but it’s time to move on. Finally concluded I just don’t have the time or energy anymore to go racing. Grandkids have taken over. Built in 98. First raced in 99. Have been upgrading since. Lots of fun in a fast, consistent car. CAMS Log book 3J for Improved Production issued 1998 Mitsubishi 4G54 Engine (bored to 2.8) Dyno’d to 182 RWHP Lightened pistons M6 Head (Ported, Polished and Flow Tested) Twin Weber 45 DCOE Carburettor’s Custom camshaft Custom Intake manifold Custom
14
Roll Cage
Chevrolet camaro 1968 drag car tabbed 15 inch wide wheels Dana diff front fiberglass clip imported from states. . Cage so much work in car left hand drive set up for big block Chevrolet twin turbo also have pipes made for twin gt42s
20
Roll Cage
Selling my Mitsubishi EVO 6 Track Car and Tilt Trailer. This is a fast, fun, reliable and proven track car. Last outing at Philip Island 1:43.4. Cant find our times for Winton however, was sub 1:30. Engine 2.0L forged internals, last time on dyne approx. 290kw ATW Baffled Sump Cams and cam gears 1300cc Injectors ATP Custom Gold Turbo (virtually new, one track day old) MCA Silver Series Coil overs with external canasters Cusco diff, rebuilt a few years ago Brown Davis Roll Cage with Seat mount
8
Roll CageLog Book
Complete Cheverolet Camaro Drag Car Roller Currently set up for Hemi with Bruno drive and Lenco Previously ran BBC with clutch and Lenco Comes with engine plates and header to suit both Fully Adjustable 4 link rear end full floater fabricated 9" (no Centre) santhuff suspension anti roll bars full Twin rail Chassis with Chromolly funnycar cage Complete fibre glass body, doors and front end Weld 34.5x16x16 complete fire system in current andra tech car sold with fuel tank, oil tank, wheelie b
5
Roll CageLog Book
N15 APRA PULSAR – Ready to Race $17,500 Built to production car regulations Can be run in APRA, Production Cars, Super TT, Improved Production Etc. Adjustable seat on Sparco runners Welded in Cage – Motorsport Australia approved Push button start New stainless exhaust Current APRA spec coilovers New brake discs and pads Rebuilt gearbox New clutch New battery New Oilcooler Motorsport Australia Logbook AASA Logbook 1 spare set of wheels and tyres Car is located at Smeaton Grange NSW $17,500 All en
5
Roll CageLog Book
2023 Championship winning TA2 Howe Mustang No expense spared on mechanical performance and reliability. Happy to send our crew to first events to assist with full sett up books. Log Booked Car with Full Category Compliant and Ready to Race, Fresh engine with 0 km on it Only 2 meetings since Exchange Rebuilt G Force Gearbox fitted Rebuilt Diff 1 meeting ago New PWR radiator and new Oil cooler New Power Steering 3 meeting ago Wilwood brake master cylinder's upgrade 4 full sets of Rims & Tyres F
9
Roll Cage
For sale is my 1969 Chevelle Malibu Pro-Street roller. 4 link, narrowed 9" rear, tubs, 10 point roll cage that extends to front subframe, Centerline Convo Pro wheels. Also included but not fitted is set of tubular front A-arms, a RHD power rack and Astra power steer pump with brackets. Body is excellent - painted Lamborghini Orange $30K paint job. No interior, engine or gearbox. Needs a killer engine to make this into a one-off special! I have too many projects and with ailing health, it's t
10
Roll Cage
30/4/2024 Still for sale, Need gone ! Nissan 180sx roller Was a hill sprint and time attack car Have removed running gear was running SR20 with sequential transmission All wiring left to run same setup. Have lost interest, Owned the car for the last 12 years. Car comes on front and rear coilovers Perfect car for someone with running gear with all the hard work done. Will upload photos of current and what it was like finished and running Has diff and shafts, Needs engine ecu gearbox MOD LIST
7
2006 Is7 427 GT Corvette Imported from Malaysia in 2013. Car ran in the Asia GT3 Series - Eligible for Historic Racing Harop 8 throttle body altronic ecu Emco sequential 6 speed box AP racing calipers and rotors The Drive Shaft Shop rear axles - 800 hp rated 2 x full sets of slicks and rims 1 x full set of wets and rims Many spares Car raced in QLD and NSW Production Sprots and Classic Sport Sedans Very fast, strong car Won 2015 QLD Classic Sports Sedans Series $105,000 car and spares Fully enc