18 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
20 1
Roll Cage
1040kg. @555rwhp at 18 psi This is your opportunity to buy a very well sorted Unique Time Attack package. -Recent refresh all brake calipers, brake master, new clutch slave and clutch master. -New windscreen. -All Carbon body repaired and coated in 2 pack clear. -Roof and rear bar new Matt black Avery wrap. -Microtech LT16 modified for flat shifting. -Motec CDL3 data logging dash -Lots of sensors -Oil pressure/temp -Fuel pressure -Water temp -Air intake -Afr -Seperate egts microte
10
Registered
1966 MK I MORRIS COOPER S (Bathurst Winning Year) In very original condition, predominantly unmolested Matching number car Motor and gearbox in excellent condition Long list of work carried out 9FSAY Block Original 333 Gearbox case Engine+40 (1310) Paint in very good order All new UK sourced re-trim including Westminster Carpet set REVS check completed Supplied with Independent Road Worthy Certificate Can assist with interstate transport Contact Andrew on 02 9938 2242 or info@miniandmokeworld.co
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
2
This MX5 1998 NB race car with hard top has been expertly prepared and has been proven to be a trouble free, reliable and a consistant performer. There is no evidence of accident damage. The car weighs approx 1000 kg and produces 108 kw at the rear wheels. Modifications and equipment include: CAMS approved BROWN DAVIS roll bar. RACING BEAT cold air intake and RACING BEAT exhaust headers. RACING BEAT tubular front sway bar with adjustable end links and RACING BEAT reinforced sway bar mounts. WHI
227 1
Registered
When you think of iconic Japanese cars from the seventies, a number of makes and models immediately spring to mind. But if you had to nominate just one car that best represented design cues, styling and engineering from the era, it would have to be the Mazda RX-3 Coupe. When it was released here in 1972, the rotary-powered coupe was a legend-in-waiting and without question the car has well and truly achieved cult status amongst the Australian automotive community. This particular example has
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
7
Roll CageLog Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car
23
Fresh built mazsport short shaft 20bpp never started, hgt 5 speed gearbox with twin plate clutch. Triple throttle bodies with manifold flanges and exhaust flanges included. The car has been fitted with an comprehensive cage bent up by Bonds roll cages and fitted by a qualified welder. Full hardrace suspension control rods including upper and lower control arms. Ap front brakes brand new and evo 10 rear. Two sets of 18×8.5+37 wheels one with khumo semi slicks. Other items included in the sale.
5
Registered
1979 fully restored rx7 series 1. Has hade full respray including jambs and engine bay. Restoration of interior. Original roof lining and door skins. Fully rebuilt factory 12a only done 500kms. Original wheels. Fantastic car.
9
Roll Cage
Mazda RX7 Series 5 FC 1991 Race Car. 13B Bridge Port Turbo ( built by South Coast Rotary) . 2 way LSD , GT 35R Garret Turbo , Microtec ECU , New Exeedy carbon twin plate clutch.2 sets of wheels. Rear wing, New fiberglass front splitter. Inter cooler and radiator as per pictures , OMP seat, New adjustable racing suspension. New rotors and pads . Heaps of spares. Available as a roller ( less engine) for $18,000 . Would make great drift car. Car is located in Kempsey NSW,
1
Roll CageLog Book
For sale Camaro Aussie race car. 1 round old after complete rebuild see below. Engine-gearbox- clutch 1 round old Diff centre half a round old Drive shaft half a round old Shocks 1 round since rebuild Uprights 1 round since full service Front and rear windows 1 round old. New reverse gear 1 round old Reco alternator 1 round old. Comes with spare bonnet with high aero kit Spare set of wheels x2 rounds old. My loss is your gain everything is new and ready to race. We also have a enclose
3
Roll CageLog Book
Excellent car with new wrap. Very well maintained car that has had new discs, pads, crown wheel and pinion, 6 point belt, screen, and various rod ends. Runs a water cooled set up that is fast and reliable. Comes with spare front splitters and Bathurst wing. If you’re a good enough driver the car can run top 10. $26500
6
Roll CageLog Book
Selling new RX8 Bathurst 6 hr car, raced Bathurst 6 hr event. Built to the Production regulations for the Bathurst event. New AP brakes. Every component new and serviced. Spare package with spare new engine and gear box and wheels available. Over head Fuel rig with new hoses available. Perfect car to race reliably and cheaply in any 3E Production race or the Bathurst event.
6 1
Roll CageLog Book
For sale is the Dick Ward Go Gear sport sedan. As built and driven by Dick in sport sedan races in the 80s. This car presents in excellent condition. - 13b PP engine using MFR factory peripheral port housings and making 300hp. - Hewland transaxle stamped as ex F1 F.Williams. - full chromoly space frame chassis - magnesium uprights - lots of top spec features as raced in the day. - 600kg makes it an absolute blast to drive and extremely fast This car is eligible to run as invited in Historic
20
Roll Cage
Unfinished project. Extensive chassis mods, 3/4 chassis kit, Watts link rear suspension, brand new Braced 9" diff, 3.9 gears and Detroit locker with 35 spline full floating axles strange nodular iron carrier. PBR M series brakes (vt-vz) 6 piston fronts and 4 piston rears, all 4 rotors are 2 piece design and 360mm. Tilton 9000 series brake pedal set Tremec 5 speed TKO box triple plate clutch 7&1/4 inch clutch 19" 3 piece simmons wheels FR19s 8" front 10"rear Coil over front end conversion Flaming
13
*PRICE NOT NEGOTIABLE Ford Falcon 1979 XD Race Car. 393 CI 2V Cleveland. Full CAMMS log book. Video is from Test and Tune Drive Day at Eastern Creek on 30.06.23. Would consider possible trade for 1969/70 Mach1 Mustang or selective early Ford models to the value of $70K. The car will be running Test & Tune track days when work commitments allow. TBA. Trailer was re-registered July 2023. I am unable to answer phone calls while at work, so please leave a message as I do not return calls to unk
16
For sale, new RX8 Cup race cars. ready to race in the RX8 Cup Series. very cheap way to race in a one make series with RX8 rotary cars. All built with new race parts ready to hit the track in a fast growing National series and CAMS state championship. cars are all the same spec.Fresh running gear. 2 cars to choose from, silver or yellow.