75 items for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
Featured ads
All Results
15
Roll CageLog Book
For Sale is my Evo 7 RS fully serviced and tuned by Insight Motorsport in Sydney. Everything has been checked, refurbished or near new. Significant $$ has been spent on the vehicle with extensive weight reduction. Race weight with all fluids and approximately half fuel is 1305Kgs. Eligible for many race series. Power is 390kw at all 4 Wheels at 28 psi (E85) Also Tuned at 316kw at all 4 wheels on 23 psi (E85) Car is painted not wrapped. Car has Log books. No accident history! Engine: 2.
10
Roll CageLog Book
Mitsubishi Circuit/Tarmac Rally EVO 5 RS Mark King's original 2000 Australian Production Car Championship winning car. Immaculate condition. This car is prepared for circuit racing but also comes with German H&R height adjustable coil over and sway bars for tarmac rally. New Dashsport motor and turbo New 712GTP turbo on mandrel manifold Heavy duty racing clutch and pressure plate Moroso alloy racing sump Full Motec dash Hypertune exhaust manifold Titanium 2 1/2" exhaust PWR racing radiator ATL
4
Roll CageLog Book
2001 Mitsubishi Lancer Evolution 7 RS (Evo VII) Log booked as production touring car 3E, fun and low maintenance competitive car Fresh motor that has only done 3 race meetings with a larger baffled sump, tuned, MCA red suspension, Haltech dash, ducted brake cooling, Cams approved Bonds roll cage, additional fuel tank in the boot with a swirl pot and bosh fuel pump and much more.. Will include a 2 sets of spare wheels (evo 7 and evo 8) and some race-day spares
10 1
Roll CageLog Book
NSW Sports Sedan Championship winning car - 4 times in the last 10 years. The Camaro has been fully serviced since competing at the Gold Coast in the last Round of the 2023 National Sports Sedan Series and is ready to race. The Camaro has raced successfully and continuously in the NSW Sports Sedan State Championship and Bathurst Combined Sedans for the past 10 seasons, Bathurst Tin Tops, Island Magic and a number of seasons in the National Sports Sedan Series since 2013, including 2023 in wh
4
Selling my 2.4l stroked evo 6, engine has just been fully rebuilt by Craig at Aurora Speed not a cent spared in the build. Car is currently not running as it needs engine wired up and a tune I’ve just lost interest in the car and need a car more suitable to get around on the daily my loss your gain, the engine build its self was over 20k+ Has brand new Excedy heavy duty clutch (put in with motor) Aftermarket lower rear control arms And plenty of other little added extras I’ve done to
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
12
Roll CageLog Book
Race and round winner in the Sports Sedan Vic State Race Series last time out, Sports Sedan or Improved Production race car , dry sumped 2.2 litre, fresh engine , Modena 5 speed just freshened , 6 pot and 4 pot calipers , supercar rotors , 3 way shocks , new turbo and exhaust , most of the running gear is one meeting old , Philip Island 1.38s Sandown 1.14s Fast car ready to race , multiple sets of wheels , spare drive shafts and other spares , 420 kw on 28 psi , you will not go faster for the
9 1
Roll CageLog Book
Genuine Australian delivered 12A RX3 Coupe. True to it’s original log-book from 1991 the car still runs period correct 12APP, extended fuel-bowl Weber and has an early LSD and Needham close ratio box with 6-point bolt in cage. Lots more pics here https://www.dropbox.com/scl/fo/in3bfqwjsf82gsbn3cn1b/h?rlkey=ti3snaesjilgakocndpv7q2j7&st=i3k76t7r&dl=0 Plenty of mechanical upgrades since this car was pulled from a shed where it had sat for over 13 years. This is an Australian delivered 12AP coupe
10
Roll Cage
2001 nb8b 1.8 VVt engine and 6 speed version Approx. 100km on the engine and chassis. AVO turbo kit with wideband A/F meter and Adaptronic ECU 162rwkw at 10psi Tuned by Castle Hill Performance Safe tune for longevity at track days and not outright power. Brown Davis Roll bar with CAMS paperwork Factory Hard top with bolt in mount kit Yellowspeed Coilovers Whiteline front anti-roll bar Bauer Extended lower ball joints (for more -ve camber) Rebuilt brakes new seals and pistons Slotted discs U
12
Roll CageLog Book
Group 3E Production touring car....2023 Australian Production Car Championship A1 Class winning car. Just completed 4 from 4 wins at recent Bathurst International. Engine 1 meeting old...comes with comprehensive spares package including panels , long engine , and gearbox. 12 wheels and tyres, new unused AP Rotors, pad sets, springs suspension and driveline parts. Car was completely customed wired at beginning of 2023 season along with new Motec PDM's and Dash at a cost of $40K. New 6 spot AP Ra
16
RegisteredRoll Cage
Ready to race and built for Circuit Racing and Time Attack, this is one of SA's fastest Evos! Or if you're looking for a very tough streetcar, it's fully road registered, and in a couple hours you can swap over to the street parts and drive it every day. You're basically getting 2 cars in one depending on what you want to do with it. It's won SA Time Attack trophies in every event it's ever entered. Fresh built 2.35 Stroker with only 100kms since rebuild. Making 377kw @ 32psi on e85 track tun
9
Roll Cage
Rolling , Caged Evo 8 Shell MA certified fully welded Roll Cage , thru to front towers . Serial 73367 ( 2023 ) All Cross Members , Suspension , Arms , Steering Rack , Column & Wheel , Fuel Tank , etc Wiring Loom Rear Brembo Brakes Sump Guard Mount Fabricated Gearbox under member Carbon Fibre Door Cards , Foot Plates Ralliart rear Stone Shields Carbon Fibre Air Box Spare Rear Hubs Spare rear Suspension Arms
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
4
Roll CageLog Book
Competed in the 2023 National Trans Am Championship and finished inside the top 10. Professionally maintained by Dream Racing Australia between each event. New front and rear brakes (Pads & Rotors) Motec Tps sensor upgrade, Soild plate clutch upgrade, Larger oil cooler upgrade, Air box upgrade, Tail shaft with upgraded yoke and new uni-joints, Rebuilt diff, Recently serviced gearbox, Spare Front Bar, Spare Sway bar, 8 Rims (4 x slicks & 4 x wets) Leak down test performed after last round
9
RegisteredRoll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo
7
Roll CageLog Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car
4
Roll CageLog Book
2000 Corvette Trans Am Carbon Fibre body. Best of everything, no expense spared. - 358 SB2, KB Carb - 180 degree headers - Holinger 5 speed (spare ratios), sequential, flat shift - Winters diff, 3 link or 4 link car - Air jacks, air gun, Paoli regulator, engine heater - Motec, GPS, transponder - Penske 3-way dampers - Brembo brakes, PFC rotors, Tilton clutch - All adjustable roll bars - 3 x sets of 16” BBS wheels - 2 x sets of 18” wheels - Huge spares package including radios, sprin
10
Roll Cage
Rx8 with a honda k24a3 engine and tremec tr6060 gearbox. -honda k24a3 engine, bc double valve springs and retainers, 40 degree intake cam gear, k20 type r oil pump kit -custom engine mounts, gearbox cross member and diff mounts -custom steam pipe manifold, aeroflow gtx3071r turbo, 44mm wastgate, full 3 inch stainless exhaust -custom intake manifold, intercooler piping, catch can and other extensive fabrication -600x300 intercooler, alloy radiator, oil cooler -surge tank, walbro 460lph fuel pump
6
RegisteredRoll Cage
1962 MORRIS MINI 850 FITTED WITH FUEL INJECTED YAMAHA R1 AND QUAIFE LSD HALTECH ECU FIBREGLASS LIFT OFF FRONT HALF ROLLCAGE VENTILATED ROTORS WITH 4 SPOT CALIPERS FRONT COILOVERS 2 FUEL TANKS HIGH AND LOW PRESSURE FUEL PUMPS 3 PIECE ALLOY WHEELS FITTED WITH HOOSIER TYRES 2 RACE SEATS 2X 5 POINT HARNESS NSW ENGINEERING PAPERS WAS REGISTERED IN NSW CURRENTLY REGISTERED IN QUEENSLAND
8
Roll CageLog Book
1979 Chevrolet Monza Trans Am GT1/ Historic Sports Sedan. 1981 USA Trans Am Jerry Smith, Paul Decker Dvr, James Webb. 1980-87 SCCA. Divisional champ. Bob Blacklaw Australian Sports Sedan 1988-1996. Then displayed in National Motor Racing Museum, Bathurst until 2017. 3/4 restored to original Trans Am and Sports Sedan specs. Full body and mechanical. All the expensive work done. Chev 350 c.i. Engine new build by well know Group N Chev engineer. Muncie M22 gearbox etc etc. Original body and tube c