32 items in Australia for sale
Most Recent
Most Recent
Keyword
Price
Listing Type
All Results
10
MX5 na6 turbo with AC 1.6l turbo T28 turbo Longnose b6 engine Wiseco lower comp pistons Familia b6t rods ACL bearings Metal head gasket Boost gauge Aem wideband Boost controller Kraken turbo manifold kit with downpipe (recently supplied and installed by MX5 mania) Turbosmart wastegate actuator Alloy radiator Alloy overflow bottle Front mount intercooler Coolant reroute kit Ls style coils Wildwood front brakes Nb rear brakes NB 6 speed gearbox with Short shifter Nb rear torsen diff Frame ra
6
Completely rebuilt over the last period of Covid, ground up restoration, has not been on a track since rebuild. Fitted with a Nissan FJ 20 ET engine with forged internals and Motec management. Will need testing and sorting, just been dynoed at low boost to give the engine a bit of run time, comes with mounted wets and spare new fronts, a complete new forged engine in dismantled form, 3 engine blocks and 4 cylinder heads, and a mass of spares including 2 gearboxes. Was originally raced bu Keith L
15 1
Roll CageLog Book
This incredibly special Holden Ute was built for James Brock and was produced by Wayne Park in Queensland who was the original builder of all the V8 Brutes. James Brock first competed in round three of the 2003 V8 Ute Championship at Wakefield Park and went on to finish 3rd in the Championship that year along with numerous pole positions and lap records. In the same year James and father Peter Brock drove the car together and won the “Great Aussie Ute Race” which was held at the Bathurst 24 Hou
7
Roll CageLog Book
IT ACTUALLY PAINS ME TO TYPE THIS Roller- MR ROTA NO ENGINE( everything that is bolted to it stays on engine, including headers , fuel reg, injectors, remote oil filter housing) ,CLUTCH,BOX - everything else stays . I have stolen tail light assemblies for new car but ill find some more from somewhere that will be in mint condition alloy radiator , spal thermo, electric water pump custom chromolly front crossmemer custom 10l fuel tank in engine bay with holley fuel pump microtech LT16 ,7 inc
6
Roll CageLog Book
Genuine RX-2 Body Shell Group Nc Historic Touring Car 12A Bridgeport, 51mm IDA Weber, Lightened Rotating Assembly 4 Speed 4.7 Locked Diff Volvo 4 Spot Front Brakes Koni Shocks Front and Rear Steel Roll Cage Log Booked 13 x 7 Hotwire Wheels Recently Retrimmed front Race Seats Raced at Morgan Park Raceway and Leyburn Sprints by Bob Heagerty Fun Little Mid Field Race Car
2
This MX5 1998 NB race car with hard top has been expertly prepared and has been proven to be a trouble free, reliable and a consistant performer. There is no evidence of accident damage. The car weighs approx 1000 kg and produces 108 kw at the rear wheels. Modifications and equipment include: CAMS approved BROWN DAVIS roll bar. RACING BEAT cold air intake and RACING BEAT exhaust headers. RACING BEAT tubular front sway bar with adjustable end links and RACING BEAT reinforced sway bar mounts. WHI
3 1
Roll CageLog Book
Improved Production RX3. 13B O'Dell Fontana bridge port. Laird manifold. Motec. Aim dash with full logging. 5 speed dog box. Hilux rear end, floating axles, cambered. MCA 3 way adjustable gold shocks. Spare set of wheels, flares, spoilers and moulds. Wilwood brakes.
15
RegisteredRoll Cage
Puma 2 for sale $34,450 ono Puma 2 is powered by a Nissan s13 SR20DET (about 180rwkw) and has a 5 speed gear box. The colour is stunning and has the normal stone chips you’d see on a driven example. Puma 2 has: • 15x7 koya wheel (matching spare on the back) • Canvass roof • Racing rear roll bar and cross bar with fire extinguisher mount Puma Clubmans are a larger chassis to suit normal sized humans. The not so good is that Puma 2 could probably do with a new clutch, which I have and will
9
Mazda 3 2011 6 speed Race Car. Never seen the track, 90% completed Drives and runs roll cage required final welding. New Exceedy Clutch, New Carbotech Brakes, Racing Beat Sway bars , exhaust, New Koni Sports Struts, New Disc, Relocating workshop and have no where to store so the car requires a new home.
9 1
Roll CageLog Book
Genuine Australian delivered 12A RX3 Coupe. True to it’s original log-book from 1991 the car still runs period correct 12APP, extended fuel-bowl Weber and has an early LSD and Needham close ratio box with 6-point bolt in cage. Lots more pics here https://www.dropbox.com/scl/fo/in3bfqwjsf82gsbn3cn1b/h?rlkey=ti3snaesjilgakocndpv7q2j7&st=i3k76t7r&dl=0 Plenty of mechanical upgrades since this car was pulled from a shed where it had sat for over 13 years. This is an Australian delivered 12AP coupe
3
Roll CageLog Book
2004 VY SV8 Log booked 3J Improved Production 5.7 rebuilt less than 20 meetings ago (only averaged 2-3 meetings per year) Heads redone 6 meetings ago Fuel cell with external fuel pumps 1 set spare rims and AO50s 1 set of spare front quarter panels Consistent 65’s at Waneroo with good rubber, very reliable car Can send more photos and video required
1
Roll CageLog Book
Mazda RX8 Multiple race winning car with all compliance parts sealed. Welded national roll cage, eligible for RX8 cup / Formula RX8 / production cars, Bathurst.
9
RegisteredRoll Cage
Mazda 1300 fa3ts 20bt Engine 20b Bridgeport turbo Built by South Coast Rotary Recently had a freshen up and hasnt done more 1500ks since rebuild. Billet 20b shaft Lighten rotors All SCR seals throughout. New race bearing Custom oil block setup. And much more. Car has made 930hp on 27pounds on United e85 on a hub dyno still more in it very safe tune. Recently running 15pounds making 700hp Turbo Precision 83/85 turbo with a 1.28 rear housing 45mm turbosmart wastegate Custom exhaust manifo
7
Roll CageLog Book
Due to retirement from racing reluctant sale, looking for a keen driver, no work to be done as the car is serviced and ready to race. To organize a track test day please call Garry 0419260465 or email: info@stevenssecurity.com.au Mazda RX 7 two door full steel space frame fiberglass body Sports sedan, freshly painted, Race engine is a USA Nacar SB2.2 - 6 litre V8 - roller cam - Alloy heads triple plate clutch, Holley Carburetor, Gearbox is a 6-speed manual Hollinger, Gear box has super car
16
Roll CageLog Book
Team Dynamic VY Commodore Chassis #001, driven by Jason Richards. Recently restored. Fresh Engine 0km Fresh Ohlins Shocks 0KM Professionally prepared, turn Key and ready for Kumho V8 Series, currently presented in 2003 Richards #45 livery, a very clean and well presented car. Spares package included.
10
Roll Cage
Rx8 with a honda k24a3 engine and tremec tr6060 gearbox. -honda k24a3 engine, bc double valve springs and retainers, 40 degree intake cam gear, k20 type r oil pump kit -custom engine mounts, gearbox cross member and diff mounts -custom steam pipe manifold, aeroflow gtx3071r turbo, 44mm wastgate, full 3 inch stainless exhaust -custom intake manifold, intercooler piping, catch can and other extensive fabrication -600x300 intercooler, alloy radiator, oil cooler -surge tank, walbro 460lph fuel pump
6
RegisteredRoll Cage
1962 MORRIS MINI 850 FITTED WITH FUEL INJECTED YAMAHA R1 AND QUAIFE LSD HALTECH ECU FIBREGLASS LIFT OFF FRONT HALF ROLLCAGE VENTILATED ROTORS WITH 4 SPOT CALIPERS FRONT COILOVERS 2 FUEL TANKS HIGH AND LOW PRESSURE FUEL PUMPS 3 PIECE ALLOY WHEELS FITTED WITH HOOSIER TYRES 2 RACE SEATS 2X 5 POINT HARNESS NSW ENGINEERING PAPERS WAS REGISTERED IN NSW CURRENTLY REGISTERED IN QUEENSLAND
5
Registered
V8 Mazda Maxi Campervan S.A registered Holden 308 Possibly one of a kind Street registered with a Holden 308 turbo pattern engine. T400 three speed automatic transmission fully rebuilt with small stall Holley 600 fully rebuilt Custom exhaust Commodore rear end with welded diff Trans cooler and second radiator on bull bar Disk brakes all round The body is in fair condition and has been patched up and sprayed with a spray can Deck it out for a great Campervan Tow car for go carts Or remov
14
VU SS race/exhibition car project. Sold as rolling concern. Vehicle has a clean title and could be engineered and re registered with some work. Quick rundown *2001 VU SS *Statesman international front end conversion *4 inch reverse cowl *HSV Hard lid *HSV Sail Plain *New Blackout projector headlights *New Blackout Tail lights with LED *New Side Markers *Wilwood brake master *Wilwood brake bias valve *B&M line lock *Electric Power steering Conversion (fully functional for moving the car aroun
23
Fresh built mazsport short shaft 20bpp never started, hgt 5 speed gearbox with twin plate clutch. Triple throttle bodies with manifold flanges and exhaust flanges included. The car has been fitted with an comprehensive cage bent up by Bonds roll cages and fitted by a qualified welder. Full hardrace suspension control rods including upper and lower control arms. Ap front brakes brand new and evo 10 rear. Two sets of 18×8.5+37 wheels one with khumo semi slicks. Other items included in the sale.